TKSpartan

Great Job Peter, looks so cool!!! congratulations!! What about the quality, is it strong enough for trooping? cold or hot day.

Yeah Malcolm !! almost there!!

Hi Max, great to see another trooper applying for EIB. Nice build. For a faster process of your application, I would like to suggest you to add the following in advance, that surely the D.O.S will ask you to post: 1-Close up photos of where your shoulder bridges are connected to the chest, as well as the connection between the chest and back armor. No visible rivets are allowed. Chest and back shall be connected with a white fabric or preferably elastic strap at the shoulders. 2- Close up of rivets inside and outside of thigh ammo strip. Thigh ammo belt is attached to thigh with a solid head rivet, painted white, in the upper corner and fastened to the lower thigh ridge. The rivets used shall be single cap, double cap or split rivets. No pop rivets allowed. Rivet should be approximately 5/16" (8mm) in diameter (exterior). 3- Straight-on photo of the sniper knee (to check alignment) Sniper knee plate must be aligned with the ridges on the shin. Any additional photos or requirements will be indicated by the D.O Good Luck trooper !

Yeah Adeshir !!! Great to see your Centurion Application so soon. Good Luck Trooper!!!

Great Malcolm, looking good ESB armor. I would suggest to add a couple of photos in advance, that surely the D.O.S will ask you to post: 1-Close up photos of where your shoulder bridges are connected to the chest, as well as the connection between the chest and back armor. Chest and back shall be connected with a white fabric or preferably elastic strap at the shoulders. 2- Close up of rivets inside and outside of thigh ammo strip. Thigh ammo belt is attached to thigh with a solid head rivet, painted white, in the upper corner and fastened to the lower thigh ridge. The rivets used shall be single cap, double cap or split rivets. No pop rivets allowed. Rivet should be approximately 5/16" (8mm) in diameter (exterior). Any additional photos or requirements will be indicated by the official. Good luck !!

Hi Malcolm, I would recommend you to follow this tutorial to ensure a faster review of your application. or , if you are using google photos , there is this other tutorial. Cheers and good luck

I remember I used clamps for the ends and magnets in the middle , you could try adding them too . but definitely , the drying time is so important. good luck

I,m sure you'll be approved.

Pat, I would suggest to make the strap first to test mobility before fixing that part. looking great that abs paste filling cheers

Welcome to the ranks trooper !!! and just minor adjustments for Centurion!!

Hi Malcolm, I think you must use the following guidelines and add the photos Creating Application Post Request 501st membership status Create new post in the Request Expert Infantry Status forum Format the topic title as follows: TK0123 requesting COSTUME_NAME EIB status [ARMOR TYPE] List the mandatory costume information below Put photos directly into the post Good Luck

Welcome to the ranks Dan !!!!

Yeah!! Congratulations Adi !!! Welcome to the ranks!!!

Hi Robert, yes the photos are ok. Any adittional photo or requirement would be requested by the D.O.s . just a little patience is needed for the D.O.S has the chance to review. Cheers

Excellent Andrew!! Easy pass !!

Hi Dan, great Build !! looks so good. just and suggestion, You right bicep looks a little low.

Quedó excelente Joaquin, buen trabajo. Suerte!! Excellent Job Joaquin, Good Luck!!

Good luck !! Rayan

Yes!! looks so better now Adi, Excellent!!!

Hi Pam, As I can see, is that the rigth side is aligne with the ridges of the shin as it was requested in your EIB submission, but the left one I think seems a little low. I'm not sure about the inner part, and if it's going to be an issue. Hope some else could give some advice. Looking at you EIB submission I note that you made the sniper knee correction. It was ok there. Cheers

Excelente !!!

Wellcome to EI Trooper!! And now, go for Centurion !!

Felicitaciones Jose, Bienvenido a Centurion !! Congratulations Jose Welcome to Centurion!!

Hi, Robert Looking good on your armor trooper!! . May I suggest to add a couple of photos in advance, that surely the D.O.S will ask you to post: 1-Close up photos of where your shoulder bridges are connected to the chest, as well as the connection between the chest and back armor. Chest and back shall be connected with a white fabric or preferably elastic strap at the shoulders. 2- Details photo of your Boots There is no seam present on the front of the boot. Boots have a black sole Cheers and good luck sr.

Welcome Trooper!! and Keep on going to Centurion !!!