ukswrath

... or a dab of CA (super) glue where the two ends come together.

Hey Walt, thank you for your EI application CRL and EIB Application Requirements: All submission photos are present. Your armor displays all the necessary elements to qualify for Expert Infantry. Sly and myself would like to congratulate you on a job well done. Other-Armor Fit/Assembly: In this section we review observations made by us and your fellow troopers. None of the following suggestions will effect your EIB application. In this section we have only one suggestion. The TD could use a slight adjustment. The control panel button should be aimed upward or out away from the armor, and the length is a bit long. The good news is if you simply un-bend the clips (where the tube and clips meet) you'll shorten the length and reposition control panel simultaneously. Reference picture Centurion Suggestions: In the Centurion section we make recommendations to make sure you have the best chance of passing our highest level of achievement. In this area we have a few required changes you'll need to make for L3. 1) You'll need to replace the plastic hand guards with flexible. 2) Your blaster will need a charging handle, yours is missing, and the rear sight is on backwards also. Lately we've been seeing a few of these come through the apps and we're requesting they be turn around. The knurling should be facing you not the scope. Reference pic That's it Walt, just a few items and you're set.

Great idea Shea

So, do you have flare if you don't connect the cod to the posterior?

In case things don't work out between you and Jim https://www.amazon.com/Dritz-9336W-Stretch-Elastic-8-Inch/dp/B004KZ122G/ref=sr_1_3?ie=UTF8&qid=1469470580&sr=8-3&keywords=1%2F8%22+elastic+white

Thanks Walt we'll be with your shortly

Hey Dave welcome. Thank you for your EI application. Lets get started. CRL and EIB Application Requirements: All submission photos have been posted. Your armor displays all the necessary elements to qualify for Expert Infantry. Welcome trooper! Other-Armor Fit/Assembly: In this section we review observations made by your fellow troopers and ourselves. Some observations may lead to suggestions to improve the overall look of your armor. If any suggestion affects any application, it will be listed separately in the above or below sections. If we had any suggestions it would be to reduce your shoulder bell to chest and back plate gap. It appears you fill out your armor quite well and have made the necessary adjustments to bring them closer. Reference photo Centurion Suggestions: Because Centurion photos show much more detail than EIB, items pertaining to Centurion might be seen there and not here. We try to point out all we can from what is seen but the final accuracy is the responsibility of the trooper. This is also where we try and get you in the best possible position for a successful Centurion application. 1) Though not bad, the drop box alignment could use a bit of fine tuning. For level three certification (if applicable): Drop boxes must have full inner drop boxes to close the back. Flat covers are not allowed. Drop boxes are vertically aligned with the end of the ammo belt with minimal gap between belt and box. If you were to glue the drop box straps to the cloth waist belt it may help prevent them from shifting. Reference photo. I like to to use this photo of Han because it illustrates that even when bent over the drop box still remains aligned with the ammo belt edge, 2) Kidney shims. The CRL states there can only be one seal between the kidney and ab. Using some ABS paste and paint this can be easily updated to look like one seam. For level three certification (if applicable): A single visible seam line is present. Reference picture That's it brother, great job. After a couple updates hope to see you at Centurion

Great work Tom

Congrats Joe great job

Looking good, a few minor adjustments and Q mentioned and you're good to go

Awesome thanks Gary

Hey Gary, could you do us a huge favor and add a link to your EIB at the top of the page. Thanks brother

Thank you

I'm sorry I should have been more clear, the front cover strip, thanks brother

Hey Tom, before we get started we would like to know if the left thigh cover strip is running the full length of the armor or if it stops short just above the horizontal edge? It's hard to see in the images provided.

Hey David, again thank you for the pictures but as Sly mentioned earlier your blaster charge handle is facing the wrong direction, it should be curved forward. Once you fix this and post a new picture we can get you approved. Thanks brother

Excellent work!

Hey Dave myself or Sly will be with your shortly

Yea, take one for the team

The chamfer is a little steep but ok. Just make sure the cover strip runs to the top of the right shin, should be on both but as your said you wont see the left.

Bottom line it's been a rough year for everyone. Tensions are high, especially on the buyer's side. Thousands of dollars have been lost. On another thread there's been a few ideas how to curb what's happen and make future purchases a bit clearer and safer for all. I would like encourage everyone to focus on resolutions instead condemnations.

JJ makes the F11D also.

JJ (JJArmory), Jonathan (Evilboy)

I disagree. JJ and Jonathan have positive feedback for the items they've sold, they also negatives plastered all over this website, where's the outcry to stop those? Let's be honest folks. If you're on the up & up with your buyers or if you're a jerk, in addition if you're a jerk buyer what better place to resolve unresolved issues.

Yes