XYDIU Posted July 2, 2021 Author Report Share Posted July 2, 2021 Alright, not much done over the past couple of days, but I did fully attach the ab boxes to the abdomen: Ab Boxes attached One thing to note is that I saw (after taking that photo) that the 4th box and 5th box were a bit high compared to the others so I adjusted them a bit to be more properly aligned. A few more angles from above: One of the other things I completed was getting the forearm boxes able to be glued to the forearms by using an excess piece of ABS like Mario (@/TKSpartan) suggested: Unfortunately, it was a bit too close to the edge (the ABS "riser") that it sat too high when on top of the forearm plate. But since I used E6000 I was easily able to pull it off and reapply it with the correct distance. I simply did this by marking where it should be, placing it a bit in front of that line (inside) and then letting it get a bit tacky. I followed this up with then clamping it to the forearm plates so that it would sit in the exact spot it needs when I glue them together: Forearm risers (underneath the boxes) being glued into approximate place (Forearm boxes are not being glued in this pic) I also proceeded to lay out the belt boxes and match them together in anticipation for the belt kit that arrived today:Boxes on top of each other (In order)Boxes next to each other (In order) Belt kit: Belt kit from Belts of the First Order I shall assemble this in the upcoming days, after this weekend (fourth of july.) Until then, there should be a slight slowing of updates, as I am waiting for the gaskets to arrive before I continue onto the biceps, shins, and thighs. More to come~ 4 Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.