TK-23181[TK] Posted February 2, 2019 Report Share Posted February 2, 2019 Mathijs Hertogs Belgian Garisson Anovos Armor, Anovos Helmet Blaster is 3d printed updated with doopydoos parts. I updated the weathering on the Blaster. Not much. The handle and the back. I updated the mic tips I updated the overspray I updated the distance between the shoulder bells and the upper armor. I updated the hight of the belt and made it a little cleaner. This really is the tightest for me to wear this armor. I'm a sports guy and I have a muscular upper body. I can not wear the biceps parts higher than this. Also the shoulder bells cracked in the past and it took me some time to repair them. My pecks are pushing them upward a little but they are fixed close to the upper body. Thanks. MTFBWY 1 Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 2, 2019 Report Share Posted February 2, 2019 Thank you for your submission, Mathijs. Before we can move forward, please add the following: 1. Link to EI submission thread 2. Helmet maker 3. Blaster maker Required photos: 1. Neck seal 2. Lens color (backlit) 3. Wrist openings (close-up) 4. Thigh pack details 5. Sniper knee details. 6. Hand guards (showing flexibility) 7. Helmet S-trim Additional photos may be required. Thanks! Quote Link to comment Share on other sites More sharing options...
TK-23181[TK] Posted February 2, 2019 Author Report Share Posted February 2, 2019 38 minutes ago, justjoseph63 said: Thank you for your submission, Mathijs. Before we can move forward, please add the following: 1. Link to EI submission thread 2. Helmet maker 3. Blaster maker Required photos: 1. Neck seal 2. Lens color (backlit) 3. Wrist openings (close-up) 4. Thigh pack details 5. Sniper knee details. 6. Hand guards (showing flexibility) 7. Helmet S-trim Additional photos may be required. Thanks! Done. Thanks 1 Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 2, 2019 Report Share Posted February 2, 2019 Wow, that was quick! Thanks! Quote Link to comment Share on other sites More sharing options...
shashachu[TK] Posted February 13, 2019 Report Share Posted February 13, 2019 Hi Mathijs, I apologize for the delay in your review - real life has been busy! Thanks for the quick turnaround with the additional photos, and we appreciate you addressing some of the suggestions from your EIB application. CRL and Centurion Application Requirements: All required submission photos appear to be present. Fantastic job on your build. On behalf of the FISD Deployment team I'd like to welcome you to Centurion. Congratulations! Other-Armor Fit/Assembly: In this area we discuss any areas still needing some improvement. Although they did not hold you back from Centurion, at this level it's all about the small details that will really make your armor look its best. As suggested in your EIB application, we'd suggest trying to reposition the ears. Almost more important than the trap/ear alignment, it would be great to cover up the helmet seams. Moving along, nice job cleaning up the teeth and fixing the mic tip screens. We still feel the vocoder paint is a bit soft, so we're still suggesting you add some definition: Reference: Your shoulder bell fit is definitely improved since your EIB application, but if there's anything else that could be done to bring them closer to your chest armor especially, we're suggesting you give it a shot. Make sure, for example, that all the lower return edge is removed. We certainly understand that everyone is different and it may not always be possible, short of getting larger shoulder bells. Reference: Your right thigh armor is still hanging quite a bit lower than the left (it's especially noticeable in the side photos), so we're still suggesting you look into evening out the strapping if possible. In the right side photo I also noticed your posterior armor is popping out a bit, but it should sit below the kidney. You should look into adding or tightening the strapping between the right side of the posterior armor and the kidney to try to keep it in place. The left side looks perfect. Reference: And that's it! Your garrison attaché spoke very highly of you, and it's clear you've trooped hard in your kit, so we have the utmost confidence in your ability to make these changes. Congratulations again from myself, Dan, Tony, and Joseph. Now get out there and make the Empire proud! Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted February 13, 2019 Report Share Posted February 13, 2019 Congratulations trooper and welcome to the ranks Quote Link to comment Share on other sites More sharing options...
giskard8[Staff] Posted February 13, 2019 Report Share Posted February 13, 2019 Congratulations and welcome to the rank of Centurion! Quote Link to comment Share on other sites More sharing options...
TK-42134[TK] Posted February 13, 2019 Report Share Posted February 13, 2019 Congratulations on earning Centurion. Quote Link to comment Share on other sites More sharing options...
TK-23181[TK] Posted February 13, 2019 Author Report Share Posted February 13, 2019 8 hours ago, shashachu said: Hi Mathijs, I apologize for the delay in your review - real life has been busy! Thanks for the quick turnaround with the additional photos, and we appreciate you addressing some of the suggestions from your EIB application. CRL and Centurion Application Requirements: All required submission photos appear to be present. Fantastic job on your build. On behalf of the FISD Deployment team I'd like to welcome you to Centurion. Congratulations! Other-Armor Fit/Assembly: In this area we discuss any areas still needing some improvement. Although they did not hold you back from Centurion, at this level it's all about the small details that will really make your armor look its best. As suggested in your EIB application, we'd suggest trying to reposition the ears. Almost more important than the trap/ear alignment, it would be great to cover up the helmet seams. Moving along, nice job cleaning up the teeth and fixing the mic tip screens. We still feel the vocoder paint is a bit soft, so we're still suggesting you add some definition: Reference: Your shoulder bell fit is definitely improved since your EIB application, but if there's anything else that could be done to bring them closer to your chest armor especially, we're suggesting you give it a shot. Make sure, for example, that all the lower return edge is removed. We certainly understand that everyone is different and it may not always be possible, short of getting larger shoulder bells. Reference: Your right thigh armor is still hanging quite a bit lower than the left (it's especially noticeable in the side photos), so we're still suggesting you look into evening out the strapping if possible. In the right side photo I also noticed your posterior armor is popping out a bit, but it should sit below the kidney. You should look into adding or tightening the strapping between the right side of the posterior armor and the kidney to try to keep it in place. The left side looks perfect. Reference: And that's it! Your garrison attaché spoke very highly of you, and it's clear you've trooped hard in your kit, so we have the utmost confidence in your ability to make these changes. Congratulations again from myself, Dan, Tony, and Joseph. Now get out there and make the Empire proud! Thanks guys! Quote Link to comment Share on other sites More sharing options...
TK-40996[TK] Posted February 13, 2019 Report Share Posted February 13, 2019 Congratulations brother !!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.