Murray1134[501st] Posted March 6, 2008 Report Share Posted March 6, 2008 I am new to all this and I'm just about to start construction on my first kit. I have a question about the neck seal (among many others, but we are just talking about the neck seal here). I'm wondering if it's worth it to buy one or if it's worth the effort to make one? Is it usually the same or similar material as the undersuit? Is there any difference in the different movies? Quote Link to comment Share on other sites More sharing options...
Amish Trooper Posted March 6, 2008 Report Share Posted March 6, 2008 (edited) For me it was simple. I purchased one instead of making because of Materials(sewing machine etc.) + labor + time, it was just better that way I did my research and found an awesome one by a member on our board who actaully incorporates a neck seal into a shirt to make it one piece here is a link to what he makes ---------- Hope this helps a little Edited January 14, 2022 by gmrhodes13 link not working removed Quote Link to comment Share on other sites More sharing options...
ManInWhite Posted March 6, 2008 Report Share Posted March 6, 2008 if you are concerned about cost, i got mine off the big auction site for very little money, but it was made really good. i believe it is a regular item. if you need, i'll send you a link. just pm me if interested. however, if you are not concerned about cost, go with steve's recommendation and get Wyatt's setup. it's top notch. Quote Link to comment Share on other sites More sharing options...
TK4205 Posted March 6, 2008 Report Share Posted March 6, 2008 TK409 makes a nice neckseal. I've seen more than a few. Quite a bit different construction than my own. I would have to say that his construction of the ribs is the best. Quote Link to comment Share on other sites More sharing options...
Amish Trooper Posted March 6, 2008 Report Share Posted March 6, 2008 Tk-409's are temporarily unavailable right now according to his site. I found that out after the fetish people bought your last neckseal I went to check his out. Quote Link to comment Share on other sites More sharing options...
TK-9820 Posted April 30, 2008 Report Share Posted April 30, 2008 I'm thinking about making my own neck seal. Is there some sort of general consensus on how many ribs there are and what diameter the tubular ribbing material is? Quote Link to comment Share on other sites More sharing options...
Murray1134[501st] Posted April 30, 2008 Author Report Share Posted April 30, 2008 I'm thinking about making my own neck seal. Is there some sort of general consensus on how many ribs there are and what diameter the tubular ribbing material is? While being far from the authority on much of anything, I would say that you shouldn't be so concerned about the number of ribs. Instead, I would say that you should go for a better look. My wife, who is the seamstress of the house, is making mine to get a better fit. We got some cording to make the "ribs" and it's approx. 3/16" of an inch wide and we're just going from the base of my neck to above the adam's apple. Quote Link to comment Share on other sites More sharing options...
riveting Posted April 30, 2008 Report Share Posted April 30, 2008 I am new to all this and I'm just about to start construction on my first kit. I have a question about the neck seal (among many others, but we are just talking about the neck seal here). I'm wondering if it's worth it to buy one or if it's worth the effort to make one? Is it usually the same or similar material as the undersuit? Is there any difference in the different movies? Not sure about differences across the movies but in ANH I have read there were two types used at least, I'm sure there are other ppl here who know more on the subject than me though I'm thinking about making my own neck seal. Is there some sort of general consensus on how many ribs there are and what diameter the tubular ribbing material is? In ANH I count 9 rib's on the front of the hero's & 14 on the back, shoot me down if I'm wrong though Quote Link to comment Share on other sites More sharing options...
The_Trooper Posted May 1, 2008 Report Share Posted May 1, 2008 Triktoys has a nice neckseal, bought it of their site. Quote Link to comment Share on other sites More sharing options...
TK-9820 Posted June 27, 2008 Report Share Posted June 27, 2008 I' m finally getting around to starting my neck seal this weekend. Anyone know of a pattern for the hero version (higher in the back)? Quote Link to comment Share on other sites More sharing options...
ProfZoom Posted September 7, 2008 Report Share Posted September 7, 2008 (edited) The_Trooper said: Triktoys has a nice neckseal, bought it of their site. Sorry to resurrect another dead thread. ------ Edited January 14, 2022 by gmrhodes13 link not working removed Quote Link to comment Share on other sites More sharing options...
tk0000[501st] Posted September 8, 2008 Report Share Posted September 8, 2008 (edited) I have one of the shinyseals. It very good quality. It's not completely screen accuarte though. An accurate seal will run you about $60-$70 if you can find someone to make one for you. --------- I have one of these too and it's top notch! Edited January 14, 2022 by gmrhodes13 link not working removed Quote Link to comment Share on other sites More sharing options...
TomG[501st] Posted September 8, 2008 Report Share Posted September 8, 2008 My test neckseal is from black cotton T-shirt (price 3$ in Globus, from size "L" T-shirt you can have two neckseals), small part of 2 mm thick foam (I bought 2x1m for 3$), then 10 cm of black velcro fastener and then told my mom, what I need to do. I´m not skilled with sewing machine yet Quote Link to comment Share on other sites More sharing options...
TK-7980 Posted September 10, 2008 Report Share Posted September 10, 2008 ProfZoom said: This one might not be elite but it looks comfortable.--------- I've got one of these. They're great. Although after a little while the Velcro might need some restitching to the fabric. Quote Link to comment Share on other sites More sharing options...
ProfZoom Posted September 10, 2008 Report Share Posted September 10, 2008 Just checked the Elite Standards page. I didn't realize there was a Basic Standards tab. "Black ribbed neckseal. The ribs should be horizontal, not be loose, and should extend from the base of the neck to the top of the adam's apple. " The shiny one should be fine. As my father always told me "If all else fails, read the directions". Quote Link to comment Share on other sites More sharing options...
Tiepilot1138[TK] Posted February 19, 2009 Report Share Posted February 19, 2009 Just checked the Elite Standards page.I didn't realize there was a Basic Standards tab. "Black ribbed neckseal. The ribs should be horizontal, not be loose, and should extend from the base of the neck to the top of the adam's apple. " The shiny one should be fine. As my father always told me "If all else fails, read the directions". Is going above the apple acceptable? I'm going to try to do this myself. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.