TKSpartan

Meanwhile into the Post Office near you.

Congratulations Trooper, welcome to EIB ranks.

For the thermal detonator, I still need to bend the clips on the back side. But having followed ukswrath’s guide, I’m finding that the part that goes under the belt is 4” long, which seems too long. Even after the bend, they seem too long. Not sure whether I should trim them so they don’t stick out from underneath the belt (as stated in the CRL). Once you have asembled the TD, you can be sure where and haw much to trim. Fit the shoulder bridges. I’m still having trouble with this. I don’t have the right curve yet, and with the armor on, I will need to have a second person help me with fitting and reshaping. A hot water bath could be helpful to reshape the shoulder bridges Figure out how to hold up the thighs. I’ve seen several posts on this. I’ve also seen something about ‘X’-style suspenders, but I’m not sure if those are meant to hold up the thighs, the torso, or both. Bellow thread shows both systems. Keep up the great work

Welcome to FISD !

Welcome to FISD Trooper !

Welcome to FISD!!!

welcome aboard Trooper !!

Hi Adam and welcome to FISD. Glad you're starting your path to become an imperial Stormtrooper !! Please check this thread about TK armor that I'm sure can be useful. let us know any questions you have. We ere here to help every step on the way. And this is an index of resources you may want to check

It's only me or for some reason the photo isn't showing?

Puoi verificare con Walt Trooper Factory su Facebbok e ti consiglio di visitare gli esperti di Snowtrooper presso il distaccamento delle Blizzard Force http://www.blizzardforce.com/forum/index.php

Hi, check the below link https://www.etsy.com/listing/1415398176/stormtrooper-first-order-rifle-f-11d?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=first+order+stormtrooper+heavy+blaster&ref=sr_gallery-1-2&frs=1&cns=1&content_source=c126f0291708c815926f7a4e1513d54d5ff46e77%3A1415398176&organic_search_click=1

Welcome to FISD!

Congratulations Trooper ! Welcome to EIB ranks

great job. thank you.

Hi Ron, I'll be making your review and need you to make me a favor brother, just a five minutes painting session for your ab buttons plates. As you can see bellow , the paint is a little off in some parts and will need to be rounded a bit. a sharp tool or cotton swab with some non acetone pint thinner could do the job. thank you .

Looking good Trooper. About the correct alignment of the Ammo pack, bellow some references for the back section gap you could use a piece of ABS glued behind and add some ABS paste and sand a little to give finish. The same applies for the front. Keep it up

A screw is ok, but personally, I would recommend to use a countersunk one.

Congratulations for your 501st approval and welcome to FISD. I have seen that you have requested the 501st Trooper Status , well done. now, just wait for your request to be approved and browse the FISD members sections .

In fact, we need you to post recent photos, not the original approval. please. Thank you

Thank you Alfredo. Before one of us start your review , we need you to add a few more info . Mandatory Information: ___ Armor Maker ___ Helmet Maker ___ Blaster Maker ___ 501st Profile link Optional information: ___ Full name ___ Height/weight *** ___ Boot maker ___ Canvas belt supplier ___ Hand guard supplier ___ Holster maker *** Although not mandatory, including this information helps a LOT. Troopers come in different shapes/sizes, and we can make certain allowances in some cases. Thank you.

Welcome to FISD Maria. We are here to help every step on the way ! ask all questions you have before paying any coin.

Awesome job Ron!

Almost there trooper. just need to remove a little bit more paint from the teeth and the material from the wrist .

Looking great John. Bellow a reference for you to check the scope and Hengstler counter correct position and other details for your build. Good luck and looking forward for your advances. Perhaps some info here can be useful for you.