TKSpartan

As Glen pointed , we have 2 sceneries here. This side looks like just a little Trim needed like your other Belt. This one is the toughest one because the Canvas needs a relocations and then make a little trimming. Can it be done, absolutely but depending on the glue or do it with careful. (Personally I have done something similar to a Anovos AB Belt that uses a hard Glue to the Belt rivets . I had to rip out the rivets and glue a piece of abs to cover the hole so I could install the new fabric Belt .

Welcome aboard Code, looking forward for some photos

Great

Yes, it looks good to me. @justjoseph63 @Chemi Thoughts?

Straight Cut

Hi Chris, Looking at your build thread you are doing a great work with your armor sir. keep it up. If I may, it seems like you have enough room in your Biceps and Forearms. To get a more accurate look, you could trim them a little more . If you used E6000 to glur the cover strips, this could be an easy fix. You could trim the raised flat area in the front an relocate the cover. I would also suggest to make a test before glue them again. Use painter's tape to join the pieces and make a test, post some photos to receive feedback (this suggestions is also for the Thighs and Shins) Reference images

Hi Mike, welcome to FISD. for your reference the bellow Trooper is 6'2" in a RS armor

Easy basic pass Jonathan. Once you have your TK ID, you can request stormtrooper Acces HERE Secondly, With the tweaks Glen suggested you can apply for our high levels program (Details HERE) Your RS prop Master Armor well worth it the effort and you will be proud of being as accurate as coming off the screen. Looking forward for your TK ID .

coming along fast and nicely, keep it up.

Congratulations Trooper !!

It's the same this side. I used Google photos and had the same issue. Changed to Imgur.

Congratulations trooper Welcome to EIB ranks !!!

Congrats for your BBB day Daryl. Remember measure twice, cut and glue just once.

Welcome to FISD Matt. Nice looking armor, as Glen said, Easy Basic pass. In a quick check, what I can add to glen's points is: The shoulder Bridge Elastic is located in the back section as per the CRL: The plastic shoulder straps need to be held down in the back via a white elastic band to the white fabric that connects/bridges the chest and back piece. Reference Image Your Left Thigh is riding a little high and uneven the right one. Just an strapping adjustment would do the trick. Reference Images Once you get approved you can request Stormtrooper Access so you can see other interesting forum sections and , perhaps, you may want to check our High levels Program. Good luck with your approval and looking forward for your TK ID.

Welcome to the ranks Trooper !!

Welcome aboard !!

3 lbs in a week , sounds fast , good luck and best wishes.

Hi Michael, I'm working on your review now and in order to continue I'll need you to do me a favor brother. The paint on your teeth needs to be dialed back a bit. As per the CRL for Basic approval, the "Frown is painted gray and does not leave the teeth area". This is actually a very common issue in Anovos Helmets (mine is too) and an easy fix! A non acetone paint remover and a toothpick or two and a few cotton swabs to remove the extra parts at the top. 10-15 minutes of work on this and you will be golden! Reference Images Looking forward to seeing the updated pics so we can get that EI badge under your name, trooper!

Hi Michael @Gh0stxxiv I'm the D.O. assigned to your review . I'll be with you soon.

Looking great !, easy basic pass.

Glad to read everything is going well , (Besides your armor ) , with you and your family. Best luck in your new job. and keep in touch.

Hi Jonathan I I wouldn't worry about re-shaping the armor at this stage. Wait for your kit so you can see across the building process if a reshape is needed. Personally I haven't had to make a water bath when built my armor. If you want to make some prior BBB day research, take a look to this useful Index. We are here to help.

Welcome aboard Lou. We are here to help. Take a look to this index. May be some useful info there.

At least here in Costa Rica, we have a children protection law that states you can't post kids photos without their parents permission, so we prefer to blank out most kids faces.

You nee to clamp both sides too. clamps, clamps , clamps Some examples For Higher Levels : Sniper knee plate must be aligned with the ridges on the shin. REFERENCE IMAGES