captsafe66

Sounds like a great idea!!

Congrats Trooper!!

yep, Trooperbay has them, just drop Mike and Email.

Looks Great!! Good Luck!!

I'm sorry for you loss Vern. I know how loss can hurt, I've lost my daughter, son, Dad and 2 grandparents in the last few years. All I can say is time lessens the pain and they will always be with you.

Well Done Trooper!!

Congrats Trooper!!

Congrats on your appoval!! Make sure you request Detachment Staus here:http://www.whitearmor.net/forum/topic/16-501st-trooper-status-requests-include-link-to-your-501st-profile-in-your-request/

Sorry for the delay, please continue to stand by.

I'm sorry this request seems to have been glossed over due to Darth Real Life by Eric. A couple of things I see as well: Do your shins open to the inside of your leg or the outside? The suggestion to "camoflage" your shims may be seen on my Centurion thread: http://www.whitearmor.net/forum/topic/20031-tk-4584-requesting-hwt-centurion-status40fxata/ The rivet suggestion on the sniper plate is correct. Your forearms look fine and I don't strap mine as well, however, you need to add a pic of the no return edges on your forearms as I do seem to see some return edge and the CRL requires none. Post your additional pics and I'm sure Eric will get back with you ASAP.

Looks Sharp! Should be an easy approval, Stand by!

Looks Great!! Good Luck Trooper!

Great issue! Better late than never.

How much gap do you have Caleb? I have shims in mine too. I'm sure I have bigger gaps to fill...lol! You can bring it to the Scotty's troop Sunday and I can see better what you may need.

Looks Great!! Good Luck!!

I will add Zach's reply to other comments on the origional thread as well: Name:Zach Posted Yesterday, 05:53 PM Hey guys I just wanted to apologize for any toes that were stepped on and realized how ahead of myself I got with my original post. I obviously let my fan boy excitement get the best of me when deciding to share the news of my new project, and can understand the suspicion based on the obvious lack of photographic evidence that I had failed to supply upon my initial post. PEDRO! Your parts are stunning and were a large part of my childish over zealousness to contribute to the blaster building community and a very strong inspiration once I found your etsy page! I would never blatantly disrespect or insult any fellow builder and re-cast anybody's hard work ever! Pictures of the process start to finish, as well as photos of the real sterling SMG I casted off will all be uploaded tomorrow along with my FISD ID name written on post it note that will be part of every photo to ensure I'm not some picture stealing google images bandit. I'll be making a trip to get into my buddies shop tomorrow afternoon once I get out of class. Again I would like to say I'm deeply sorry for my lack of clarification involving my building process and any suspicion raised from members I have purchased from in the past. I just wanted to join the ranks of you fellow kit makers and casters who have made my childhood dream of owning an accurate looking E-11 a reality! Le's allow him time to add some pics as well.

Please take any discussions and/or debates to this area: http://www.whitearmor.net/forum/topic/25753-newly-available-e-11-dicussion-area/#entry324501 Zach, please post your pics in your origional post here and to the new area as well. Let's keep this a sales thread please. Thanks everyone.

Ok, I'll give you some more time, good luck!

I am opening this up to discuss the new E-11 purposed. This thread is to keep the disucssion out of the sales area. Let's keep it civil and productive. http://www.whitearmor.net/forum/topic/25752-affordable-e11s-are-now-reality/ Here is the original post: Name:Zach This goes out to all the E11 kit builders. Remember wearing down the tips of your fingers as you scoured the internet for how people build such amazing E11s? Or when you first heard the names doopydoo or scifire and the amazing hype attached to their products only to find out they cost an arm and a leg? Well like all of you, I've been there many times, and felt that frustration and anger of possibly having to settle for a spray painted hasbro because I don't have a trust fund. Well luckily for me, thanks to my having served for 4 years as an active duty soldier in the Army, I had the chance of meeting a historical firearms collector right outside of Boston, and I immediately asked him if he had any MG34's or Lewis Machineguns, or possibly a Sterling SMG in his collection. He laughed about the first two, them informed me he owned an authentic sterling. I was beyond floored! I then proceeded to spill my fan boy guts all over the shooting ranges parking lot, and asked if it would be ok if I got molds off of it, and after a very enthusiastic "of course" he then asked if I could build one for his collection. This threads purpose is to allow the newer generation of trooping enthusiast an easier route with less difficulty and scolding on forums for being misinformed or confused. I'm a full time college student not having to juggle kids, 40 hours a week, a wife, and then my hobby, so turn around time will be rather quick on these kits. All kits will be cast in Smooth-On Onyx Black Heavy Duty resin. Since I'm lucky enough to have so many great affiliations with historical weapons collectors, I've gotten to mold the goodies like an authentic Henglster, Both the long (ANH), and the short (ESB) style tank scopes. This kit being offered is kind of like the build to suit type blaster kit. I am casting all of the neccissary components to be able to provide builders an accurate affordable means to make: ANH stunt and hero E11, ESB stunt and hero E11, and a kit for an E11 Tunesia, which from personal observation, is a "figure it out yourself" kind of build. I honestly don't even want to try and begin to do an ROTJ E11 because of the whole T-Rack & greeblie debate. I haven't set a concrete price per kit yet, but I'd love some input from you guys as to what could be considered both fair and affordable. The kit will contain: front sight, front muzzle, T-Racks, folding stock assembly, magazine well with removable magazine, grip, trigger guard, trigger, safety selector switch, rear sight, rear cap, rear cap release, bayonet lug, hengstler counter, tank scope of your choosing, and power cylinders. This kit is intended for a pipe build, but for a nominal fee I can assemble and prime. If you just want an E11 that's finished, weathered, and ready to rock that's also an available option. If anyone has any input please let me know, because I don't want this to spiral out of control and before I know it I'm just as guilty of the aforementioned companies who in my opinion charge a bit much. Please PM me if you have questions, and I'll try and get pics up of my test casts from Sunday!

Ok, I must insist on pics of this version of the E-11, if pics aren't posted, I will be forced to lock this tread. Let's give him some time everyone, we don't want to overwhelm this thread. Thanks.

Yes, photos will be a positive in a sales thread for E-11's.

Looks Great! Good Luck!!

Sounds good, I just need some inner boxes for my drop boxes for my new build, whenever I have a chance to finish it...LOL!

Congrats Trooper!!

Looking Good!