Leaderboard

When this one appeared from today's troop, I couldn't help myself. I had to follow Morgi's lead.

Thank you all for your great comments and suggestions!! I was approved today for the 501st , Cloud City Garrison!!

Wow! I'm lost for words, thank you Chemi and all the staff here at FISD I will put every effort into the feedback given and strive for accuracy to achieve the next level. I've got this far with the help of the team here and I truly appreciate it, long live the Empire! Thanks again this has truly made my week. Best regards Paul

Rogue One TK Sources (updated 8-10-2020) Since I keep seeing these questions popping up from time to time, I figured I would make this simple for everyone. I do not have experience with some of these sources so if any of you do please chime in. Further, I am not pushing or supporting any of these sources, I am just providing you all the list and what they provide, and you choose who and what you want to go with. Lastly, If I do have experience with a specific source, I will note that and my overall experience with them. I am not pushing any sources, rather supplying you a list to work from if you are having a hard time finding stuff. Please feel free to add to this or provide "creative" comments. ROTK Sources Jimmiroquai Armor, Helmet, Under Suit [email protected] Jim was the first source for ROTK armor and is considered very accurate. The armor is flexible fiberglass and requires painting. I have a full set or armor, helmet, and under suit from Jim and I like everything. 850 Armor Works Armor, Helmet, Under Suit https://850armorworks.com/ 850 AW is offering vacuum formed ROTK armor. They produce this armor in ABS and it looks accurate from the pictures I have seen. They also offer a resin helmet and undersuit now. Helmet Nico Henderson Helmet 3D print files https://www.facebook.com/nico.heath Etsy Nicolai DesertFareCosplay https://www.etsy.com/au/listing/784808040/rogue-one-stormtroopersolo-mimban Nico designs extremely accurate helmets, his Shoretrooper helmet is considered the most accurate available and now he has designed a ROTK helmet that is extremely accurate and all the greebles are separate so you can print and paint them before attaching them. You will need to message him on FB. I have his ROTK helmet files and find them to be outstanding. Suggested print orientations https://www.whitearmor.net/forum/topic/53519-recommended-printing-positions-for-nicos-tk-helmet/ Updated files TKModder421 https://www.whitearmor.net/forum/topic/53406-modifying-the-nico-helmet/ OxProps https://www.thingiverse.com/thing:4227844 Lenses Green Rogue One TK lenses to fit the Nico Henderson helmet Mr Paul's Shoretrooper Build https://www.facebook.com/totalgrunt Armor akira-yuming Armor 3D print files https://www.cgtrader.com/3d-print-models/art/other/star-wars-rogue-one-tk-first-imperial-stormtrooper-armor ( Build thread Jason @BigJasoni build thread https://www.whitearmor.net/forum/topic/49826-the-bigjasonis-rotk-3d-print-build-thread/ Updated 3D files Jason @BigJasoni updated kidney plate https://www.whitearmor.net/forum/topic/52974-rogue-one-new-generation-eib-centurion-kidney-plate/ Jason @BigJasoni updated belt boxes https://drive.google.com/drive/folders/19k-95YPTsiBJzHGIumsGLYQjQlx_S0p4 Jeff @11b30b4 updated ab greebles https://www.thingiverse.com/thing:3973969 Jeff @11b30b4 updated handplates https://www.thingiverse.com/thing:3910278 (issue with sides of model) Ox Props hand plates https://www.thingiverse.com/thing:3750366 Shoulder Strap 3D files printed in TPU https://www.whitearmor.net/forum/topic/57810-rogue-one-tk-shoulder-straps/ Hasbro Black Series Helmet Amazon and others Very nice helmet that will require significant alteration to be 501st approved. I have one and I am planning on altering it for use with my 850 AW armor. Build threads updating Jeff @11b30b4 updating Black Series helmet https://www.whitearmor.net/forum/topic/48054-11b30b4-tutorial-rotk-black-series-helmet-mod/ Colin @OddViking327 updating Black Series helmet https://www.whitearmor.net/forum/topic/52589-modifying-a-black-series-helmet-for-accuracy/ Updating Colin @OddViking327 vent/traps updated 3D files https://www.thingiverse.com/thing:5455582 Please Note HeadShotProps is temporarily suspended as a recommended vendor, until they are back to normal and gain positive feedback from our members. HeadShotProps Armor, Helmet https://www.etsy.com/listing/830810037/rogue-one-stormtrooper-armor-kit?ref=shop_home_feat_4 The armor is vacuum formed and looks very similar to 850AW, although the TD looks better in the pics than the 850AW TD. The helmet looks to be a nice pull, this helmet is roto cast with greebles Soft Goods Other than the previously noted sources many of the soft goods are available from these sources: Dark Side Closet Under Suit https://www.facebook.com/TheDarkSideCloset/ I have messaged them for pricing and shipping, and they are very responsive. Geeky Pink’s Gaskets Under Suit https://www.facebook.com/GeekyPinksPhantasticGaskets/ You will need to message here and provide specifications. Keep Trooping RO Boots, Gloves, Strapping https://keeptrooping.com/ I have a set of boots and gloves from IB. I love the boots, the gloves are not the highest quality. Endor Finders RO Gloves https://www.endorfinders.com/ I have a set of gloves from EF and I love them. Katarra8 RO Pauldrons https://www.etsy.com/listing/150178963/classic-star-wars-stormtrooper-shoulder?ref=shop_home_feat_3&frs=1 I have a RO Orange Pauldron from Katarra8 and I love it. Veeds Pauldrons RO Pauldrons https://www.facebook.com/pages/category/Product-Service/Veeds-Pauldrons-305552456469495/ I do not have any of Veeds’ Pauldrons but he is highly reviewed and respected. Sheev's Emporium RO Undersuit and Gaskets https://www.facebook.com/sheevsemporium I do not have any of Sheev's goods but I do know they have been very active in the Shoretrooper community and the quality seems to nearly screen accurate. Crow Props RO Boots https://crowprops.bigcartel.com/product/fo-r1-tk E-11s Bryan @trooper96 3D print files https://www.printables.com/model/155855-st-sterling-l2a1-aeg-and-rogue-one-e-11-conversion Sterling conversion https://www.printables.com/model/168104-rogue-one-e-11-conversion-kit-for-sterling-smg-mk4 Hyperfirm Weaponry (HFx Productions) GOING OUT OF BUSINESS, NOT TAKING ANY NEW ORDERS RO E-11 https://www.facebook.com/HFx-Productions-1669859386576227/ I have a B-Grade RO E-11 from Hyperfirm and love it. Praetorian Blasters RO E-11 https://www.facebook.com/BlasterMaker/ I do not own a PB RO E-11 but it looks awesome. S&T Full Metal Airsoft Sterling E-11 RO E-11 https://www.evike.com/products/61969/ While most of the E-11s used in RO were made using the S&T Full Metal airsoft Sterling, this E-11 is not very accurate for RO. The scope, counter, and power cylinders are all wrong and there is not a light rail or tactical light. DoopyDoo’s RO E-11 parts https://www.doopydoos.com/star-wars-props-31-c.asp It has been noted that some of the E-11s used in RO were equipped with a DoopyDoo cast of the M.H.R. Co. M38 Telescope from Sherman M4 Tank (1943 version with wide front foot). War Machine RO E-11 parts http://www.warmachinepaintball.com/online-store-replicas/ If you are looking to make a full “all metal” RO E-11, look no further. War Machine makes everything you would ever need. Bulldog Props RO E-11 parts https://www.facebook.com/BulldogPropsJapan/ Brian makes resin casts of the M.H.R. Co. M38 Telescope from Sherman M4 Tank (1943 version with wide front foot) that are completely accurate and disassemble-able. I own one and love it. I have done a full review of it on FISD. Shear Tech RO E-11, Rubber RO Handguards https://www.facebook.com/sheartech/ I am not real familiar with these guys but the E-11 looks nice and the rubber hand guards are nice as well. Picatinny Rail ROTK / FOTK E-11/F11D Picatinny Rail - (evike.com) - Link (purchase) E-11/F-11D Picatinny Rail - (justloseph63) - Link (purchase) E-11/F-11D Picatinny Rail - (m416gelblaster) - Link (purchase) F-11D Picatinny Rail - (themaninthesuitcase) - Link 3D files E-11 Picatinny Rail - (TK14082) -Link Part of Rogue One 3D files While there are a lot more sources out there this is a fairly good list for anyone to work from. I did not include sources like static burst communication kits or urethane rubber shoulder straps sources, but they are out there and if you are looking for that stuff you should be able to find them. I hope this helps those of you who are looking to embark on your ROTK journey. Rough comparison Chest / Back

Hello everyone. I recently joined the forum, and planning my build at the moment. I'm an artist in Montreal, grew up on Star wars...etc.. The goal is having a TD at some point next year, but I will start with a TK. Already reserved an AP kit, and received my E-11 blaster 2 days ago from Quest Design. Gift to myself for turning 50 early next year. Having a blast going through all the topics and ressources on here trying to plan ahead. Looking forward to the build.

Thanks Glen, Luca and Mario I really appreciate your support

Congratulations Trooper, welcome to EIB!!!

Congratulations! I'm sure you'll head on the Centurion soon

Congratulations trooper and welcome to the EI ranks and also the Expert Infantry Honor Gallery

Hi Paul, and THANKS for your submission for ANH Stunt EI! CRL and EIB Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of Expert Infantry. Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armor, and please keep in mind that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. First of all, I would like to congratulate you on the EXCELLENT job you did with this RS kit. As you will see below, these are all small details, which will not be a problem on your way to CENTURION. Starting from the helmet, for L3 the CRL states that: -Ideally, placement of ears (and screws) should closely follow the rear angle of the trap above them As can be seen, the left side is perfect, and the right side could be improved by rotating the ear a little bit...It is very little, and that is why we add it as a recommendation. We will only ask for it as a requirement for L3 if the ears are in an "ugly" position. Reference images -As seen in the reference image, we suggest you trim down the ends of the brow trim. Easy fix. Reference images -The posterior tab is pointing down which causes the snaps to show. Maybe you just forgot to connect the posterior snap to the cod. If you look at some other RS builds this can(should) be addressed. If the strap is indeed connected, you may have to trim a bit off of the return edges on the sides of the tab (second photo) to achieve this. Reference image Other RS builds -We recommend trimming the edge on both sides of the sniper knee. As you can see in the reference images, they were a little more "angled" and aligned with the "bottom edge"(and looks more screen-accurate). Reference images -The Rivet of the thigh ammunition belt could be a little more to the front, as shown the reference images. Reference images Centurion Requirements: In this section we prepare you for our highest tier of approval. Because Centurion photos must show more detail than EIB, items pertaining to Level 3 might be seen there and not here and additional photos may be required. We try to point out all that we can from what we are able to clearly see, but the final accuracy is the responsibility of the trooper. Not much to say here... -L3.Ear bars shall have only one bump painted in black (rank stripes). It seems that the light, when taking the photo, makes some strange effects. However, we can clearly see that the rank stripes are missing. . An easy paint job, Paul. Reference images -We believe that although it is very little, the gap could be reduced to zero in this area. Just adjust the shoulder elastic a little and it will be perfect! In addition, the undersuit seems to show through the bells area. It may be a dressing issue, or maybe you need a size down. Reference image -L3. No return edge on the inside of the front of the forearm is allowed. There are a couple of areas where some return edge can be seen. It will be a few seconds with a dremel, very easy!!! Reference image -Again it is very little, but we think you could raise the belt a little to make it 100x100 screen accurate.. I know you are thinking that it is so little that it seems ridiculous to be asked, but we assure you that people pay attention to this detail, and it is almost a sign that differentiates a CENTURION from the rest. You know, the Centurion level, it's all about the details. Reference images -We see a little gap in those joints. We are sure that if you tighten that belt a little more, it will be perfect. Reference images -The corners of the plastic ammo belt shall be trimmed at a 45 degree angle that that meets the outer edge of the cloth belt. A small adjustment on the right side of the belt. Just trim a mm(or less) so that that bottom corner is just in line with the canvas belt. Reference images -There are some areas of the belt that need to go to the barbershop. Reference images -It looks like your calves are too tight, causing the ridges to overlap. Try "opening" the calves a little. If then, they are too loose, you can put a little foam inside, and thus avoid having to cut them. Reference images -Without any doubt you have one of the best blasters that can be seen around here(only the one built by Joseph for the auction beats it). However, although in some counters the brass could be seen, in this one it does not look like weathering. It is a perfect square. You may be able to paint it black and then rub a little before it dries completely, and thus give it the " weathered " look. Reference images That's all Paul. We would like to see your application for Centurion soon. We are sure that with the skills you have shown in assembling this RS kit, these small fixes will not be a problem for you.... Don't forget to request your Certificate HERE...

There were MANY issues with screen used armor components not all being the same... not just helmets! Some Detachments (like the MEPD for instance) require for higher levels that the armor be modeled after one of the particular Sandies seen in the film(s), down to the scuffs and weathering. However, we at the FISD aim for the "ideal" trooper... think "fresh from the Imperial Training Academy". Whatever customizations people do with their armor after approval is up to them.. we are not the "armor police", lol, but the CRLs are based on the quintessential TK.

If built correctly you should have no issues with Basic approval. There are a few sets of DA props armor that have made it to higher levels, but my big issue with them is that because of the way this vendor vaccu-forms this particular component (photo 1) the large ab-button plate is designed to sit inside the raised area around it (2nd photo) as opposed to having a rim that sits on top of the raised area as seen on screen used armor.. Will it affect Basic 501st approval? Probably not... that depends on your GML, but it will need to be fixed or replaced by another vendor for higher levels. DA props Reference images We have seen this issue corrected by adding a solid back plate and using ABS paste** around the edge.. then sanding/polishing it. ** Just make sure that the plate and the ABS paste is made from the scraps from the original kit, as colors can be different. Back plate added and ABS paste applied. End product!

Good evening Sirs, I have amended my TD and attached photos of all requested details on my armour. To achieve the correct detailing position I removed half inch from the bracket/clip holder. Cod/post. Ext. Wrist Interior strapping Hansnap Ammo pack interior Boots Thanks again for the feedback and the knowledge of details to make our suits as screen accurate as possible.