vecspeed12 Posted January 28, 2010 Report Share Posted January 28, 2010 (edited) So i'm fairly new to this helmet topic. I've been browsing FISD everynight and searching. I purchased this kit from a member and im curious to find out what kind or which helmet it is. it actually seems a bit small and thin. The previous owner said he bought it roughly 4-5 years ago. I'll let the pictures do the talking. Any help would be gladly appreciated! What is this tab? Size comparison, keep in mind its not assembled so its sitting in an angled position. (unknown helmet, MR, FX) Edited February 1, 2021 by Sly11 Edited to restore images Sly11 2021 Quote Link to comment Share on other sites More sharing options...
TK-J Posted January 28, 2010 Report Share Posted January 28, 2010 Looks to be RT-Mod. It will be slightly smaller than the MRCE, and quite a bit smaller than the FX. Quote Link to comment Share on other sites More sharing options...
JTninja[TK] Posted January 28, 2010 Report Share Posted January 28, 2010 I had the same tab on my AP. Not sure why its there, but a little sanding the front edge and the rest is covered by the ear... Quote Link to comment Share on other sites More sharing options...
TK-4510[TK] Posted January 28, 2010 Report Share Posted January 28, 2010 100% sure its RT-MOD Quote Link to comment Share on other sites More sharing options...
tkrestonva[TK] Posted January 28, 2010 Report Share Posted January 28, 2010 Hmmn, The ears don't have the uniquely-shaped bump molded into them that my RT-Mod (Mk IV, I believe) helmet has. Quite the opposite - the bumps are separate pieces on this kit. An earlier version, perhaps? Also, I always thought Rob preferred to assemble his helmets himself as opposed to selling them in kit form. Quote Link to comment Share on other sites More sharing options...
littledragon88[TK] Posted January 28, 2010 Report Share Posted January 28, 2010 I am almost certain it's an RT-Mod as the kit comes with the dome-piece separated from the front and back piece of the helmet. Quote Link to comment Share on other sites More sharing options...
Trooperman Posted January 28, 2010 Report Share Posted January 28, 2010 Is it me or does the frown look like its a very soft pull Quote Link to comment Share on other sites More sharing options...
TK-4510[TK] Posted January 28, 2010 Report Share Posted January 28, 2010 Early RT-MODs were softer like this one. The decals are definitely RT-MOD style. Your right about the ears though... havent seen that before. Maybe Jez's website would have pics? Quote Link to comment Share on other sites More sharing options...
TK-4510[TK] Posted January 28, 2010 Report Share Posted January 28, 2010 On second thought.... I think I was wrong. I dont know if thats an RT-Mod or not. Looks like a different maker but same style and decals as RT. The ears are totally different than RT after visiting his website and SWhelmets... I dont know dude... Weird. Quote Link to comment Share on other sites More sharing options...
RogueTrooper[TK] Posted January 28, 2010 Report Share Posted January 28, 2010 I have seen that helmet before too, Mike is right it does have the same look and characteristics as RT but softer, Also the ears look more like FX. Could it be TK560's lid? Quote Link to comment Share on other sites More sharing options...
Obievon[501st] Posted January 28, 2010 Report Share Posted January 28, 2010 The tabs are just from the pull. Has nothing to do with the helmet. It's just where the plastic has bunched up in the vacuum forming process. Just sand it down and you're good to go. I don't know the make either but it looks to be a nice lid. My 2 cents. Quote Link to comment Share on other sites More sharing options...
vecspeed12 Posted January 28, 2010 Author Report Share Posted January 28, 2010 Thanks guys! Yeah. Its a bit strange. I was looking at RT-mods site last night while I was making this thread. It looks a bit similar but the bumps on the ears fooled me. I think this helmet has to be painted also, its a different white in the pictures. Quote Link to comment Share on other sites More sharing options...
troopermaster Posted January 28, 2010 Report Share Posted January 28, 2010 It could be a VM. I only know of two helmet makers who make their helmets with a seperate dome, VM and RT. It doesn't look like an RT to me. The 'tab' as you call it is actually webbing. This is the result of poor vacuum forming and it's caused be over heating the plastic and applying the vacuum too quickly. Can you tell if it's HIPS or ABS? Quote Link to comment Share on other sites More sharing options...
vecspeed12 Posted January 28, 2010 Author Report Share Posted January 28, 2010 I'm sorry. I haven't seen enough to tell if its abs or hips. But its certainly a different material than my fx armor. It seems thinner. The helmet itself seems pretty light but I can't tell because I haven't assembled it yet. It could be a VM. I only know of two helmet makers who make their helmets with a seperate dome, VM and RT. It doesn't look like an RT to me. The 'tab' as you call it is actually webbing. This is the result of poor vacuum forming and it's caused be over heating the plastic and applying the vacuum too quickly. Can you tell if it's HIPS or ABS? Quote Link to comment Share on other sites More sharing options...
JoeR Posted January 28, 2010 Report Share Posted January 28, 2010 I have sold a lot of RT-Mod kits in the past. This looks too soft and as mentioned the ears are not right. I would say RT-Mod recast, with weird ears! Joe Quote Link to comment Share on other sites More sharing options...
TK-J Posted January 28, 2010 Report Share Posted January 28, 2010 I bought 4 "B" grade RT helmets last year, 2 of which had that type of ear. Quote Link to comment Share on other sites More sharing options...
vecspeed12 Posted January 28, 2010 Author Report Share Posted January 28, 2010 This sucks. I would love to see how others from this batch looks completed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.