TK-16126 Requesting ANH EIB Status

**Fmove501[TK]** · June 21, 2017

b]Name[/b]: Francisco Morillo Vera 501st ID: TK-16126 FISD forum name: fmove501 Garrison: Spanish Garrison

**gmrhodes13[Staff]** · June 21, 2017

The coding in your post seems to differ from FISD, I'll post here for you. Good luck.

Name: Francisco Morillo Vera

501st ID: TK-16126

FISD forum name: fmove501

Garrison: Spanish Garrison

Mandatory Information

Armor= ATA

Helmet= ATA

Blaster= SHEPPERTON with D-Ring included

Height = 1,77 m (69,7 inch)

Weight = 80 kg (176 lb)

Boots = (Boot maker: El Corcel) + whitening on my own

Canvas belt = LUIS GUIO

Hand Plates = KARIN

Electronics= NO

Neck Seal = SHEPPERTON

Holster = LUIS GUIO

9AB6CC80-BD83-47B7-9B07-255CDF0EA063_zps

1EE971D3-B95D-4410-8E93-DA35C65E8891_zps

405F8CF8-D2D3-423D-8AC2-973FA26EF7F0_zps

**Fmove501[TK]** · June 21, 2017

Hey GMRhodes13 sorry for my younthness on my request. VERY VERY appreciated for your help on re-setting it up. I guess I have to wait for a further response from your side to confirm my EIB request right?. Regards . Fran

**justjoseph63[Staff]** · June 22, 2017

Great job on that armor, Francisco! One thing I noticed are that you should raise your ABS belt in the front. The top of it should touch the bottom of the ab button panel (or even overlap it a bit), which is an easy fix. Not sure if this will be an issue, but you have 10 tube stripes on the right side, and 12 on the left. SUPER nice job on those ab/kidney connections!!!!

For Centurion (which I hope you will be aiming for after EIB) you will need to bring the shoulder bells in to where they touch or are very close to the shoulder straps and move the drop boxes out to where the outside edge is lined up with the outside of the ABS belt. Both easy fixes!

Lastly you are missing some required photos:

1. Interior strapping

2. Full front, arms at side.

3. Full back, arms at side

4. Helmet (front)

5. Helmet (back)

6. Hovi-tip detail

7. Right side (arms raised)

8. Cod attachment (You already have the butt attachment photo).

9. Neck seal

10. Action shot

Here is a link to the EIB photo checklist: http://www.whitearmor.net/forum/topic/22604-expert-infantry-application-photo-checklist/

You should get those photos added, and then the DOs (Deployment Officers) can get your approval started. Best of luck, and I look forward seeing you at EIB, and then onto Centurion!

**Shanester[TK]** · June 22, 2017

Good luck. Your armor looks great and you've done a great job on it. I can see you cruising through Centurion, as well. My only criticism is the distance your shoulder bells are from the shoulder straps. You might try to move them a little closer to remove space between them. Again, good luck! :salute:

**Fmove501[TK]** · June 23, 2017

Shanester & Justjoseph63. Terrific constructive feedback from your side. Very very appreciated. I will immeditatly start working on the required ammendments and missing photos to secure your approval and journey up to Centurion. You are great guys. Take care and have a nice weekend. Fran

**illusionz_09[TK]** · June 24, 2017

Great job on that armor, Francisco! One thing I noticed are that you should raise your ABS belt in the front. The top of it should touch the bottom of the ab button panel (or even overlap it a bit), which is an easy fix. Not sure if this will be an issue, but you have 10 tube stripes on the right side, and 12 on the left. SUPER nice job on those ab/kidney connections!!!!

For Centurion (which I hope you will be aiming for after EIB) you will need to bring the shoulder bells in to where they touch or are very close to the shoulder straps and move the drop boxes out to where the outside edge is lined up with the outside of the ABS belt. Both easy fixes!

Lastly you are missing some required photos:

1. Interior strapping

2. Full front, arms at side.

3. Full back, arms at side

4. Helmet (front)

5. Helmet (back)

6. Hovi-tip detail

7. Right side (arms raised)

8. Cod attachment (You already have the butt attachment photo).

9. Neck seal

10. Action shot

Here is a link to the EIB photo checklist: http://www.whitearmor.net/forum/topic/22604-expert-infantry-application-photo-checklist/

You should get those photos added, and then the DOs (Deployment Officers) can get your approval started. Best of luck, and I look forward seeing you at EIB, and then onto Centurion!

Exactly what Joseph said. On point.

The only thing I would add as well is the detail on the hovi mic. The inside and outside tips should be white. It looks like they are solid black everywhere. Just a small detail tho.

Also, you need to show the back detail of the thermal detonator.

Good luck with your submission. Nice job

**Sly11[Admin]** · June 26, 2017

Great job on that armor, Francisco! One thing I noticed are that you should raise your ABS belt in the front. The top of it should touch the bottom of the ab button panel (or even overlap it a bit), which is an easy fix. Not sure if this will be an issue, but you have 10 tube stripes on the right side, and 12 on the left. SUPER nice job on those ab/kidney connections!!!!

For Centurion (which I hope you will be aiming for after EIB) you will need to bring the shoulder bells in to where they touch or are very close to the shoulder straps and move the drop boxes out to where the outside edge is lined up with the outside of the ABS belt. Both easy fixes!

Lastly you are missing some required photos:

1. Interior strapping

2. Full front, arms at side.

3. Full back, arms at side

4. Helmet (front)

5. Helmet (back)

6. Hovi-tip detail

7. Right side (arms raised)

8. Cod attachment (You already have the butt attachment photo).

9. Neck seal

10. Action shot

Here is a link to the EIB photo checklist: http://www.whitearmor.net/forum/topic/22604-expert-infantry-application-photo-checklist/

You should get those photos added, and then the DOs (Deployment Officers) can get your approval started. Best of luck, and I look forward seeing you at EIB, and then onto Centurion!

Hi Francisco, could you please also add a photo of the other side of you blaster (charging handle side, and a photo of the rear of the blaster showing the D ring.

Thank you

Sign In

TK-16126 Requesting ANH EIB Status

Recommended Posts

Fmove501[TK]

Link to comment

Share on other sites

gmrhodes13[Staff]

Link to comment

Share on other sites

Fmove501[TK]

Link to comment

Share on other sites

justjoseph63[Staff]

Link to comment

Share on other sites

Shanester[TK]

Link to comment

Share on other sites

Fmove501[TK]

Link to comment

Share on other sites

illusionz_09[TK]

Link to comment

Share on other sites

Sly11[Admin]

Link to comment

Share on other sites

Join the conversation

Pages

Activity

501st Legion

Browse