AnjelRedemption[TK] Posted May 18, 2015 Report Share Posted May 18, 2015 I know, I know.....Rubies it the devil! So please don't tell vader or the emporer (because I don't want to get choked! LOL) But i found this blaster at Target for 12 bucks...(i know i'm cheap) The reason I went w/ this blaster is because to me it was the most accurate looking one....I know....Rubies accurate? It has the counter, the magazine and the scope doesn't look to bad...it even has the correct amount of T-tracks.... so before you crusify me....take a look at the build and then make your own opinion... (THIS IS FOR BASIC APPROVAL ONLY!!!!!) Ok...here we go.. so first i cut out the vents... Then i drilled some holes for the wires coming from the counter.. Then I wrapped some regular black wire around the screw driver.... Then I painted it all satin black... and put it back together! And there you go! agian this is only good enough for basic approval. It's a little on the small side, but it works for me because i'm a too small for a stormtrooper anyways! A appreciate any and all feedback! Thanks! 1 Quote Link to comment Share on other sites More sharing options...
charlesnarles Posted May 18, 2015 Report Share Posted May 18, 2015 (edited) *Ghasp!* No stock catch box thingy under the butt! Nor power cylinders. I think what Rubies did was acquire the SW Rebels show's 3d model and just printed it. Not bad for just painting and drilling. With a little tlc you could make it look even closer (like shave down the tracks a bit and open the scope rail etc.) Edited May 18, 2015 by charlesnarles Quote Link to comment Share on other sites More sharing options...
Heat2237 Posted May 20, 2015 Report Share Posted May 20, 2015 Looks great!! 1 Quote Link to comment Share on other sites More sharing options...
AnjelRedemption[TK] Posted May 20, 2015 Author Report Share Posted May 20, 2015 I know it's not perfect, but for the price i couldn't help it. I do plan on making some more mods to it, I will be weathering it w/ some silver drybrushing and eventually add some custom power cylinders. For basic approval....this works for me. Thanks for the feedback! Quote Link to comment Share on other sites More sharing options...
bigcheesewilly Posted May 26, 2015 Report Share Posted May 26, 2015 (edited) It looks really great for what it is...well done!!.... It's 10 x better than the dreadful hasbro I would sand the T-tracks down from their high arch, that really looks silly....good job though.....maybe a bit of weathering Edited May 26, 2015 by bigcheesewilly 1 Quote Link to comment Share on other sites More sharing options...
Novak Dimon[TK] Posted May 26, 2015 Report Share Posted May 26, 2015 Doesn't look bad! And for the price: great! I would sand down the t-tracks too. Then it would be good for more then a swift view! Cheers Christian Quote Link to comment Share on other sites More sharing options...
Bulldog44[TK] Posted May 26, 2015 Report Share Posted May 26, 2015 Very cool! Looks great.sure you could customize it further but as is, can't beat it for the price. Well done! Quote Link to comment Share on other sites More sharing options...
Ollie mills tk[TK] Posted June 1, 2015 Report Share Posted June 1, 2015 Here's my one converted Quote Link to comment Share on other sites More sharing options...
AnjelRedemption[TK] Posted June 3, 2015 Author Report Share Posted June 3, 2015 Nice job Ollie! That turned out great! What did you use for the power cylinders? Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted June 3, 2015 Report Share Posted June 3, 2015 Ah now it's my turn to watch you. hehe Keep up the great work. Quote Link to comment Share on other sites More sharing options...
Ollie mills tk[TK] Posted June 4, 2015 Report Share Posted June 4, 2015 The power cylinders were based of wolfs cub, I brought his budget resin ones to use as a reference (my first attempt that I made were too big) I ended up breaking my wolf Cubs ones as I dropped them on concrete and they shattered into a million pieces ... Quote Link to comment Share on other sites More sharing options...
AnjelRedemption[TK] Posted June 5, 2015 Author Report Share Posted June 5, 2015 NO!!! Sorry to hear that....but it turned out great though. Here is some updated pics of the weathering I did on mine. I know I still need to trim the T tracks and make some custom power cylinders. Ollie, i'll be using your pics as a referance! Quote Link to comment Share on other sites More sharing options...
trooperdrew[TK] Posted July 14, 2015 Report Share Posted July 14, 2015 AnjelRedemption, As for the wire, I assume it's just some kind of electrical wire or something you can get at a hardware store? What kind of black spray did you use? Do people use anything in particular? Did you use a primer beforehand? Thanks! Bout to start my own rubies project. Drew Quote Link to comment Share on other sites More sharing options...
AnjelRedemption[TK] Posted July 30, 2015 Author Report Share Posted July 30, 2015 Hey Drew! Sorry for the delayed response...darn vacations! lol I use some regular black copper wire you can find at almost any electrical store or off of an old apliance that you don't need or is broken. I used the satin black paint, i didn't want gloss or flat, so this is a good inbetween. I did not prime it before hand but it wouldn't hurt, also make sure to sand down the t track before painting (because now i have to repaint mine) Hope this helps! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.