Jump to content
gmrhodes13

Hero Bucket Build

Recommended Posts

Well I have had a brown box sitting around for a while, been busy with other projects and costumes, now it's about time to start on my hero bucket which will be the last of my hero conversion. This is an ATA helmet which I have decided to modify to a hero 3 teeth per side version, a TM is being saved for as we speak :D

I started by using my hobby heat iron to apply heat on the inside of the lid on the teeth that needed to be removed, gently moving the iron around while keeping a flat peice of triangle of plastic held tight on the other side, took a bit of time as I didn't want the teeth to completely melt through. This worked well but left a very small ridge around what had been pushed through so I spent some time with 240 grit sandpaper to remove the ridges, then went to 600 grit and on to 1200 grit. Once the sanding was finished I buffed with some cutting compound and it came up a treat.

Sorry no photos of the teeth at this stage as I go a bit ahead of mysleft and went right on to sanding the inside, drying off, masking up then a couple of coats of satin black.

hel1.jpg

Share this post


Link to post
Share on other sites

Wow, cool idea with my the iron!

Would really love to see some close ups of the teeth area.

Share this post


Link to post
Share on other sites

Some detail shots of the teeth mod

hel2.jpg

And close up
hel3.jpg

Share this post


Link to post
Share on other sites

Wow. I´m impressed.

Maybe I need to order another ATA helmet.....

 

Do you want to order john danter´s hero conversion kit or what ears and bubble lenses do you want to use?

Share this post


Link to post
Share on other sites

Thanks everyone

 

ATA provide hero ears you just have to ask for them when ordering. John was not doing any bubble lenses when I enquired, I just asked others who where making hero lids where they got their's from and managed to get some from a guy called Steve, he was very helpful. I also got a pair of lenses for another member in my garrison from Paul "troopermaster". 

Share this post


Link to post
Share on other sites

Not as yet I have had so many side projects on the go, Jawa's mainly, imperial binders and code cylinders, so my hero lid had to go to the back of the line LOL. Hope to get back on to this soon :D

Share this post


Link to post
Share on other sites

I wish you good luck, mine is still on hold doing a tusken workshop for 12 and have orders for 5 Merr- Sonn blasters over at IOC so going to be busy for a little longer lol. I have to stop saying yes to helping people, nah you no I can't :)

Share this post


Link to post
Share on other sites

Finally been able to get on top of all the projects, waiting on new things to arrive and for paint to dry, time to get back on to my Hero Bucket :D

Trimming out the teeth and eyes.

hero16.jpg

Trimmed a bit more to allow the bubble lenses to fit nicely.

hero17.jpg

Share this post


Link to post
Share on other sites

Got two sets of bubbles early on, one set was for a friends build but he decided not to do a hero so I ended up with two sets. I decide to use this set from Paul (troopermaster) as they are a really nice green, the others where quite dark.

 

Got the cap and sides trimmed, magnets I find are the greatest help with the fitment, always seems the lids wants to pull down on one side, this is solved once the rivets are fitted.

 

hero18.jpg

 

And from the side

 

hero19.jpg

Edited by gmrhodes13

Share this post


Link to post
Share on other sites

Rivets in and brow trim fitted to check alignment.

 

hero20.jpg

 

And from the side

 

hero21.jpg

Share this post


Link to post
Share on other sites

bash-head.gif

 

Yep I realized after looking at some pictures I had downloaded to check the painting on the teeth lol, Teach me for leaving this build so long, I had all

the specs still on my computer just did not look through them again. Not to worry I have a second set of ears which I will put on the bucket on the weekend :D, can't find anything over here that will melt abs enough to make a paste, thank goodness for extra ears :D

Edited by gmrhodes13

Share this post


Link to post
Share on other sites

Nothing as strong to make a paste, it tries to melt but just dries out once it is left for a while. Used a grater to get the abs really fine too but still no luck. I have used nail polish remover (3 different makers) and automotive thinners and no luck. Doesn't matter new ears here I come :D

Edited by gmrhodes13

Share this post


Link to post
Share on other sites

medicom-stussy-bearbrick-stormtrooper-1-

 

Much better :D

Edited by gmrhodes13
  • Like 1

Share this post


Link to post
Share on other sites

Wow, you are seriously an artist with an iron and sandpaper...those teeth (or lack of them) are amazing.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...