Rat

Wasn't sure if they were the right size or too big. Sent from my VK815 using Tapatalk

So these are good? Just happened to have them laying around. Sent from my VK815 using Tapatalk

Better view, perhaps. Sent from my VK815 using Tapatalk

So would these be suitable for the TD? Sent from my VK815 using Tapatalk

I may need to look at my elastic on my brackets. I've also contemplated just straightening the chest straps a bit. I also think I'll straighten the back a bit more. Sent from my VK815 using Tapatalk

Yeah I'm just finding it odd having this issue with my height being near to 5'10". Sent from my VK815 using Tapatalk

Unless you're a short rebel imposter. LOL! Sent from my VK815 using Tapatalk

Thanks I had sort of guessed that was all there was to it, but not seeing anything about it and getting to this point I was beginning to wonder if there wasn't one that I had missed somewhere. Sent from my VK815 using Tapatalk

Great idea Daryl. How low should the chest set on the ab? I've never noticed any comment on this. Sent from my VK815 using Tapatalk

Still working out the best way to permanently mount my lenses but for now the "tape" that was holding the frown mesh in is working. So I got the heat gun out and did some reshaping of the back shoulder straps? Wings? You folks know what I'm talking about. The fit is better and they don't bite as much now. However the chest still feels like it is riding high and the seems to be a lot of left over space in the chest. Also got the right shin retrimmed and cover strip is gluing now. I also got the thigh ammo pack drilled and soft mounted it's a bit late for the hammering to finish it off tonight. Sent from my VK815 using Tapatalk

1. I keep throwing that back and forth as well for the same reasons. 2. Yes that line on the shoulder you're wondering about is most likely a cut line, but a picture would be helpful. 3. I would leave it. You don't want to have to start making new return edges. Sent from my VK815 using Tapatalk

Recut the welders shield and frown mesh and replied them in. Sent from my VK815 using Tapatalk

So did a bit of clean up on the frown and eyes and repainted the frown. Sent from my VK815 using Tapatalk

Awesome! I think I may need to nudge it back just a bit further, but now I see what I'm going for. Thanks. Sent from my VK815 using Tapatalk

Like this? Sent from my VK815 using Tapatalk

So looking at starting this do I want any of the return edge left at the end? Sent from my VK815 using Tapatalk

Thanks Tony I finally found a strip of flat steel that worked out great for that. Sent from my VK815 using Tapatalk

Main construction is complete now for sorting out the little things. Back shoulder connection reshaping, right shin refitting, getting the shin elastic and clips glued and painting and I think it'll be basic approval ready. Sent from my VK815 using Tapatalk

So I worked out the thigh issue. Sent from my VK815 using Tapatalk

[quote post="605642" I would try to bend those returns to make them more flush and eliminate that gap. *insert obligatory heat gun warning here.* I've run into some slight issues with the heat gun on my right forearm. Gonna have to reshape my back shoulder straps soon. Sent from my VK815 using Tapatalk

The snap can but it isn't necessarily required. Here's mine. Sent from my VK815 using Tapatalk

Here are some pictures. Sent from my VK815 using Tapatalk

So I'm having a bit of a dilemma on my right leg. My thigh isn't setting flush to glue the rear cover strip. I tried to heat it and reshape it enough and that didn't help and I tried to clamp and magnet it together with a strip of steel with no luck either. After the clamping and magnets i still end up with about 2-3mm between the strip and the armor. Any other ideas? The other is my shin, it fits well enough but it is overlapping top to bottom. I could trim some, but I know that the ankle can't lose anything. Not sure if I want to attempt reshaping or not. I get some pictures when I get back inside. Sent from my VK815 using Tapatalk

I'm using elastic with the bicep clips. Sent from my VK815 using Tapatalk

Yup all of that and I need to do this still. The anovos kit isn't all that shiney anyways. Sent from my VK815 using Tapatalk