ukswrath

Hey Josh Sly or myself will be with you shortly. While you wait could you fill in the blanks below at post at the top of the page please. Basic Information 501st Member Page: Mandatory Information Armor Maker = Helmet Maker = Blaster Type = Optional Information also welcome

Hey Joe welcome and thank you for your EIB application. Let's take a look. CRL and EIB Application Requirements: Beautiful job on your armor, the classic RS is hard to beat. It's a beauty. Looks like all the required submission photos have been posted. Andrew and myself are pleased to announce you armor displays all the necessary components to qualify you for Expert Infantry. Congratulations Other-Armor Fit/Assembly: As you know as we get to the higher levels of accuracy we look a little deeper. In this section we'll review observations made by either your fellow troopers or Andrew and myself. Some observations may lead to suggestions to improve the overall look of your armor. If any suggestion affects any application, it will be listed separately in the above or below sections. We have a couple minor areas to mention one being the Hovi tip interiors should be white. This could be a simple photo issue, it's just hard to tell. Reference photo Another area worth mentioning is the back plate to kidney gap. Not a huge deal but there should be little to no gap here. Tightening the strapping between the two should resolve the issue. Centurion Suggestions: In this section we prepare you for Centurion. If we had further suggestions or requirements to specify in preparation for your Centurion application we would mention it here. Good news, we have nothing to add at this time. Excellent job on your build. You're garrison and the empire should be proud

Yep that's it. Thank you

Michael your helmet is too clean for a Stormtrooper. Please send it to me for proper disposal. NICE!

Hey Joe one more request before we get started, could we get a photo of the waist belt connections, armor side please. Thank you

Copy that

Looking good Matt. I'm sure this was for the photo only but just in case, you might want to give your calves some breathing room. Keep up the good work.

You mean hard hat liner?

That is sick. Love it. Great job Q

Anovos is decent armor however, there are other armors out there that may last longer with better support. Take a look at this thread "Armor and where to find them" and draw you own conclusion. https://www.whitearmor.net/forum/topic/11538-the-various-types-of-armor-and-where-to-find-them/ . We're here to help if you have further questions.

great advice, works well

Hi Antonio, thank you for your EIB application. Let's take a look. CRL and EIB Application Requirements: All the required submission photos have been posted. You armor displays and the required components for L2. Andrew and myself would like to welcome you to the rank of Expert Infantry . Excellent job Other-Armor Fit/Assembly: In this section we review observations made by your fellow troopers and ourselves. Some observations may lead to suggestions to improve the overall look of your armor. If any suggestion affects any application, it will be listed separately in the above or below sections. We have a few areas to go over here so let's get to it. Starting at the top, it looks as if you cut the shoulder covers too short on the back side. There should be a tapering off of the cover where your's appears to be missing. It's recommended you repair or replace these. Take a look at the reference photos below. Reference photos. There should be minimal gap between the shoulder bells, chest and back plates. We're recommending you tighten the connecting straps and possibly remove more lower return edge allowing the bells to move closer to the chest and back plates. Reference photo Chest plate should lay flat against the ab plate. Not a big deal but the chest plate should be positioned closer to the ab. Tightening the straps between the two should remedy this. Reference photos Calf closure cover strip placement. As illustrated in the reference photo below the armor halves do not overlap and half the cover strip should be connected to the armor while the other half floats, essentially covering the opposite half of the shin armor. The arrow represents the edge of the armor in relation to the cover strip. It is recommended the cover strip be moved over. We'll talk about the over lapping armor in the Centurion section. Reference photo Centurion Suggestions: In this section we prepare you for Centurion. If there were any areas of concern they would be discussed here. One area of concern is the helmet decals. The CRL states for level three certification (if applicable): "Tears/traps shall be hand painted or use decals that emulate hand painted (with correct ANH TK details)." Yours will need to be replaced before applying for Centurion. Reference photo/s Drop boxes not alignment with the ammo belt. The CRL states: "For level three certification (if applicable): Drop boxes are vertically aligned with the end of the ammo belt with minimal gap between belt and box." Simply gluing the drop box strap to the cloth belt usually remedy's this issue. Reference photo As mentioned in the EIB suggested section the CRL states: "For level three certification (if applicable): Lower legs must be constructed using the butt joint and cover strip method. Overlap construction is not allowed." This applies to the rear also. The calf halves should butt up against one another with the cover strip over the joint. Reference photo That's it Antonio. great job on your armor. Hope to see you at Centurion.

Thank you

Alright Antonio, we're almost there. Upon further review we noticed the calf cover strips are extending to the top of the calf. They're to stop at the bottom side of the upper return edge. Please correct this and post a new photo showing the updates. Thank you Reference photo

Very nice

Want! lol

I may go with a Dr am for the Kelley stripe Sent from my SM-G955U using Tapatalk

Congrats Jarad Sent from my SM-G955U using Tapatalk

AH HAHAHAHA!!!!

Wonder if there's any commission involved lol JK hahahaha

Hey Darren welcome back. Thank your Centurion application, let's do this. CRL and Centurion Application Requirements: All required submission photos are present. Thank you for making the suggested repairs you look GREAT! Sly and myself are happy to say your armor displays all the elements as set out in the Centurion CRL. We would like to congratulate and welcome you to the L3 rank trooper. Beautiful job on your build Other-Armor Fit/Assembly: If we had anything to add here it would be to tighten or replace the connecting straps on the left side Ab and Kidney where there should be no gap. That's it brother. Time to get out get trooping as the Empire's newest Centurion.

Well thanks to CLINT! lol I'm going with both mfg now. Derrek pour another mold, PP sent

When do you sleep? hahahaha

Yep that's what we're looking for, thanks Darren

Fixed!