TANGO'D FETT

Beat me to it too , this was on my to do list in urethane rubber

New resin ordered as i had no luck with the plyester and am going with a polyurethane clear 1 to 1 mix , as they are so small it was too difficult to get the small amount of catalyst needed for the right cure with the polyester. Should be with me in the next couple of days

Soory again here for the delay on this,I am all done bar the clear resin parts for the scope. I received a new supply but the cure times have been Highly excessive like 2 days !!! Am onto the manufacturer to try and remedy the problems and if i have no luck i will have to try another supplier, sorry again and apologies for the delays here ....coming soon for sure

Cool thanks for letting me know I will have to give it a try

As John said dont take prop store as 100% , they recantly had an E11 for sale with an M38A2 scope on it saying it was 100% accurate, this could possibly be a base gun and the parts were added after filming, the scope is sitting a lot further back than any i have ever seen before. Another possibility is that most props get damaged to hell in filming and parts may get replaced , put in the wrong place or exchanged for the nearest thing. My policy is if it doesnt come with a pic of it on film then its not proved.

Looks awesome and a very interesting approch using the foam, whats the sealer gesso that you used , not familiar with this product in the UK whats it made from and is it painted on ?

Sorry for the delay guys ,all molds are done but i have had problems with my clear casting resin for the light diffuser parts for the scope , suffice to say its in the bin and i had to order some new Also awaiting packing boxes to ship these with as i was concerned jiffy bags were not strong enough so they are on their way too, should be ready to go in a few days

Thanks buddy , this is one i made as a commission and I also do resin greeblies as well for the ROTJ E11.

Looks awesome mate you should be very pleased with your handywork, still recon it cost more than £2 though

I'll give you a tenner for it john looks great mate ,very nice job as usual, tell beks i haven't forgotten her stuff, just been busy getting these ready and will be in touch soon

New mold for the scope worked out fine so just have the diffuser to mold that goes in the scope lens. Will be going to the post office on saturday to get shipping prices so should be good to go for begining of next week. I will get a few sets molded over the weekend as well so they are ready to ship straight away. thanks Steve

Hi guys , thanks for you mails and I will reply wth details as soon as i am ready to ship. I will also need to get to the post office with a parcel to get shipping costs to europe and the US. The only shipping I have available will be by our royal mail airmail ,but it will be insured and also trackable if needed. Here are some pics of the parts as promised - and with the masters I wasnt happy with my first mold of the M19 so its back in the silicone !! I will get back to you as soon as i have an update. cheers Steve

Hi guys , the scope is still in silicone waiting to dry!! Did a 2 part mold and the second side is taking ages to dry but it should be ready tommorow to do a first cast from. Have started casting all the greeblies so i have a few ready ( 3 sets so far) when they are available and i will take some pics tomorrow and post them up. I was thinking of doing these kits for £22 gbp with scope and £18 gbp without as some of you may already have an M19 already. If anyone wants any individual parts just let me know. I should be able to start shipping these by the end of this week so maybe post up if you are interested. I dont like taking money until i have the stuff ready to go so just post up your interest and when i have them ready I will let you know individually. thanks for your patience PS i will find out shipping costs asap as well.

You didnt get one of those voo voo zellars to make the flash hider from did you looks great ghosty , a very fine job there

ROTJ was the MGC (model gun corporation)replica of the canadian C1 sterling but i have seen recently a few ESB stunt resin E11 in the endor scenes , yep MKIV in ANH ,and i think there were some in ESB as well as the replica CA ones.

If its any help for other members I use plastic electrical conduit cut in half and riveted on - heres it on a finished blaster-

Looks like the base is a casting from an MGC sterling as it has the grip and receiver and the 4 bolts in front of the ejection port as well as an MGC ejection port, it has been modded to look like an ANH E11 with the rail ands scope etc, would be worth converting to a ROTJ E11 though as you have a good base there I would say its a fan made conversion.

Thats an ESB stunt E11 there on endor !! thanks for posting this i never knew they used them in ROTJ as well, the ESB stunt was used as reference for the ROTJ E11 but they must have used a few on the movie as well. heres some great hi res pics of the ROTJ e11 (the commonly known one ) that is based around the MGC sterling, theres another on page 2 as well - http://www.stormtrooperguy.com/gallery/thumbnails.php?album=164

Very nice build there , lovin the sanding lathe idea with the drill

[quote name='gh05ty Hey tango'd mate do you remember the E11 thread on the RPF i said i was gonna try to do this for £20 well its looking more like £10 at the most he he Sounds a bit pricey to me Will try and dig the plans out and look into getting copies made ,sure they would be useful to anyone making one, sorry a bit late for you ghosty

Awesome build ghosty , I have some 1 to 1 blueprints for an MG34 I bought years ago ,if anyones interested i could look into getting them duplicated or if you need any sizes i will dig them out

Am on it !! Have had a had a hectic week at work , been working days and nights while its busy !,but as soon as i have all the molding done I will let you guys know when they are ready to go , sorry for the delay chaps

That is a strange one , not seen these before looks a bit like the canadian C1 front sight and the folding stock is completely different , thanks for sharing

Hi guys I am the steve in question who made these greeblies,many thanks for the shout out John. Also thanks for posting the pics ,I didnt get a chance to take many while making it over the weekend Firstly i would like to answer a few questions regarding their source, I used many reference pics out there on the ESB stunt e11s to create these , including some of pugmans pics, as there is little reference for these I wanted to make them as accurate as i could so took the best pics i could find. I also saw a real one at the chessington event a few years back and got a few pics of the star wars musical event at the O2 from a couple of UKG members. I scaled these pics against my real sterling to get them as near as i could , they may be slightly off compared to the originals but the look is what I was trying for. I agree with John (Hi there pugman) these are in no way as good as the real thing but a cheaper alternative and a product that is not available as far as i know other than making your own. I made these after a few people asking after them over a long period of time. As the event I did last week was an ESB special they were the perfect project to do there , I often do a blaster building workshop there with the RPB so it fitted in well. I do hope you dont feel i am treading on your toes John as that was not my intention, these were not intended to be or are the same thing as your screen used casts but a cleaned up version and meant for general trooping or display. I would love one of yours too As for the kits , i will be offering these very soon , the scope i used on Johns was one i had but i just scored a real M19 so will need to get that molded along with the light diffuser for the scope lens which will be in clear resin to match the originals. Will get some pics taken of thekits as well and post them up soon along with pics of the masters too. Any questions feel free to ask guys