I can see the light at the end of the tunnel!! Anyway, this is how I have done my build to date. First removed the muzzle & scope end caps. Disassembled the the body & removed the electrix. Since I am going for EIB I ground off the left lower T track & drilled new holes in it's place. I added two T tracks using the "fingers" from a plastic rake. I got that for 50% off at home depot because it was already broken!! When sanding a used a very coarse grain if I needed to remove a lot and finished with a 320 grit. Use a Dremel, trust me!!! I started with a coat of primer, followed by a coat of silver metallic, and then a few coats of gloss black. I filled the screw hole w/ an epoxy and let it sit for a few hours, then ground off the excess. Next, I attached the Doopy Do's kit, and that's where I am now. I plan on painting it flat black to finish. Sorry about the pic quality, but my camera crapped out and all of my funds are going to my TK build!! :lol: Enjoy the picks! I will post the finished pic when I can. I appreciate any feedback!!!