hollowbodies[TK] Posted February 5, 2018 Report Share Posted February 5, 2018 I was wondering if, to be movie accurate, all the corners of all covers strips mus be cut so that they look something like this : \_/ ? (you get the idea) Or do these cut corners should only appear on a few specific cover strips? If so, which ones must be cut like this and which one must not? Thanks ! Quote Link to comment Share on other sites More sharing options...
imperialbrewer[TK] Posted February 5, 2018 Report Share Posted February 5, 2018 I’d say err on the side of consistency — all or none.Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 5, 2018 Report Share Posted February 5, 2018 There is indeed a shape similar to the one you suggested, but not quite as severe of an angle. I just rounded mine out a tiny bit to get rid of the sharp angle, but it's not a necessity. Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted February 5, 2018 Report Share Posted February 5, 2018 When ever in doubt check the TK references gallery, you will notice that not all coverstrips match but I would suggest consistency otherwise you may get stoped at approval. I also just rounded off the tips on mine, preferred that look to the cut cornered shown below. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.