Lucasiano2 Posted October 19, 2012 Report Share Posted October 19, 2012 Josep Solé ID: TK 4146 Garrison: Spanish Garrison Armor= TM 1.5mm Helmet= TM (Hand Painted) Blaster= E11 SDS Height = 5.8 Weight =159 Boots = Boots Chelsea, Equus Barcelona Electronics= Aker Neck Seal =SDS Canvas belt = TM Hand Plates = Trooperbay Latex Neck Seal =SDS Holster = TM UFFF!! Thanks!! Quote Link to comment Share on other sites More sharing options...
Faie[TK] Posted October 19, 2012 Report Share Posted October 19, 2012 Looks very nice!! Good luck Trooper!!! Quote Link to comment Share on other sites More sharing options...
Locitus[Admin] Posted October 19, 2012 Report Share Posted October 19, 2012 In accordance with the new Centurion rules which passed voting yesterday I need to see if you have split rivets or brads in the side of the ab, but other than that I think you're all good. Quote Link to comment Share on other sites More sharing options...
Lucasiano2 Posted October 19, 2012 Author Report Share Posted October 19, 2012 In accordance with the new Centurion rules which passed voting yesterday I need to see if you have split rivets or brads in the side of the ab, but other than that I think you're all good. Ok,i hope then? Quote Link to comment Share on other sites More sharing options...
Locitus[Admin] Posted October 19, 2012 Report Share Posted October 19, 2012 Just add a picture that shows it and you're done. Quote Link to comment Share on other sites More sharing options...
Lucasiano2 Posted October 19, 2012 Author Report Share Posted October 19, 2012 (edited) Just add a picture that shows it and you're done. sorry .. which rivets? six on the left or on the right My English is not very good .... grrrr tell me what pictures are and put thank you!! Edited October 19, 2012 by Lucasiano2 Quote Link to comment Share on other sites More sharing options...
Locitus[Admin] Posted October 19, 2012 Report Share Posted October 19, 2012 The left side rivets, inside the armour. So I can see that they really are split rivet. You might also want to change the cocking handle that appears to be a bit on the tall side, IE too long. But that's not a requirement, just a suggestion. Quote Link to comment Share on other sites More sharing options...
Lucasiano2 Posted October 19, 2012 Author Report Share Posted October 19, 2012 The left side rivets, inside the armour. So I can see that they really are split rivet. You might also want to change the cocking handle that appears to be a bit on the tall side, IE too long. But that's not a requirement, just a suggestion. Ahh!! ok now! well now I send you the pictures! Quote Link to comment Share on other sites More sharing options...
Lucasiano2 Posted October 19, 2012 Author Report Share Posted October 19, 2012 (edited) ok Edited October 19, 2012 by Lucasiano2 Quote Link to comment Share on other sites More sharing options...
Locitus[Admin] Posted October 19, 2012 Report Share Posted October 19, 2012 Those are screws, not split rivets. Quote Link to comment Share on other sites More sharing options...
JEDISTAR[TK] Posted October 23, 2012 Report Share Posted October 23, 2012 Looks good man! Only things I see is your left bicep is hanging way outside your shoulder bell, and can't see the black elastic on it. Your thighs have no gaps around the codplate area and your backplate doesn't have a minimal or even seam line. Good luck on your final approval though! Quote Link to comment Share on other sites More sharing options...
Locitus[Admin] Posted October 23, 2012 Report Share Posted October 23, 2012 Looks good man! Only things I see is your left bicep is hanging way outside your shoulder bell, and can't see the black elastic on it. Your thighs have no gaps around the codplate area and your backplate doesn't have a minimal or even seam line. Good luck on your final approval though! Those are all good things in terms of accuracy and form-fitting... Quote Link to comment Share on other sites More sharing options...
JEDISTAR[TK] Posted October 23, 2012 Report Share Posted October 23, 2012 Those are all good things in terms of accuracy and form-fitting... Yes, that was my point exactly Quote Link to comment Share on other sites More sharing options...
Daveskie Posted October 23, 2012 Report Share Posted October 23, 2012 Not too sure what has happened to your left bicep but it looks like your elastic snap has come undone. Should look the same as the right. Maybe swing the thigh suspenders more out to the side on the belt so your thighs don't clash with your cod so much. Apart from that looks pretty good. just don't see the point of the split rivet thing. If you can't tell if they are split rivets from the outside then that should be good enough IMO. If your going to take it this far then you might as well say the strapping should be as the original too. Centurion needed updating but this is just a step too far me thinks. Quote Link to comment Share on other sites More sharing options...
Locitus[Admin] Posted October 23, 2012 Report Share Posted October 23, 2012 just don't see the point of the split rivet thing. If you can't tell if they are split rivets from the outside then that should be good enough IMO. If your going to take it this far then you might as well say the strapping should be as the original too. Centurion needed updating but this is just a step too far me thinks. We did have a vote on the subject. Also, see me previous comment on the subject: http://www.whitearmor.net/forum/topic/21642-tk-8461-requesting-esb-ata-centurion-status/page__st__20#entry269139 Quote Link to comment Share on other sites More sharing options...
Daveskie Posted October 24, 2012 Report Share Posted October 24, 2012 Indeed and Gary has a very good and valid point which I share. As I said it is just an opinion and I am within my rights to disagree even if it changes nothing. The fact still stands that you need to see the inside because you can't confirm if they are split rivets from the outside. Anyway, as dissapointed as I may be, I don't want to divert this thread any further so will leave this one here. Quote Link to comment Share on other sites More sharing options...
89Batman[TK] Posted October 24, 2012 Report Share Posted October 24, 2012 Looks great Josep. I thiink you have totally captured the look, although on a personal level I think the holster straps are a little too long. Mathias the fact you had to ask proves my point. Josep if you need split rivets let me know and I have some I can send you. Quote Link to comment Share on other sites More sharing options...
Locitus[Admin] Posted October 24, 2012 Report Share Posted October 24, 2012 (edited) Looks great Josep. I thiink you have totally captured the look, although on a personal level I think the holster straps are a little too long. Mathias the fact you had to ask proves my point. Josep if you need split rivets let me know and I have some I can send you. I'm asking a lot of questions. Rivets being one of them. And as I said before, there's really no reason to allow anything else when they are easy to get, cheap and and accurate. As such an advocate of accuracy as you and your garrison are, I'm more than a little surprised by your resistance. Edited October 24, 2012 by Locitus Quote Link to comment Share on other sites More sharing options...
89Batman[TK] Posted October 24, 2012 Report Share Posted October 24, 2012 Mathias - PM sent. Quote Link to comment Share on other sites More sharing options...
Lucasiano2 Posted October 24, 2012 Author Report Share Posted October 24, 2012 thank you all for the suggestions and help. splits rivers are already orders, I'm waiting to arrive ... Quote Link to comment Share on other sites More sharing options...
Lucasiano2 Posted October 29, 2012 Author Report Share Posted October 29, 2012 Sorry for the wait .... I have already put the split rivets! Thanks Sven! Hopefully it is now well Quote Link to comment Share on other sites More sharing options...
Lucasiano2 Posted October 29, 2012 Author Report Share Posted October 29, 2012 Here are the pictures: Quote Link to comment Share on other sites More sharing options...
Clamps[TK] Posted October 29, 2012 Report Share Posted October 29, 2012 Way to go Josep. Way to stick with it. I cannot wait to see that approval! I am still so very jealous of that paint job on your bucket... I need to send my buckets your way to paint...very nicely done! Quote Link to comment Share on other sites More sharing options...
Lucasiano2 Posted October 29, 2012 Author Report Share Posted October 29, 2012 ok, thanks! I'm hoping if I pass!😬 Quote Link to comment Share on other sites More sharing options...
captsafe66[Admin] Posted October 30, 2012 Report Share Posted October 30, 2012 Nice modifications!! Good Luck!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.