Somatophylax

Salut. Tu es un peu en happy person . C'était en 2015 [emoji12] Sent from my iPhone using Tapatalk

I still have 2 questions though: 1- Where do I get a 5-button strip? 2- What do I do with the 22mm kidney notch (which was required for TK Centurion)?

Hi. Where did you get the 5-button strip?

Greetings brother (and sister) troopers! I have a centurion-level ANH Stunt Stormtrooper (AP build) and I am interested in converting it into a TK Commander. Obviously I cannot consider a Level 3 TKC because both centurions are incompatible. But I'm quite OK with having a Level 1 TKC. After reading the CRL, here are the changes I have to make. Can you tell me if I summed it up OK? 1) Fuse the kidney/butt plates into 1 piece 2) Flip 180 degrees the wide button plate on the abdomen 3) Change the 4-button rectangular plate into a 5-button plate 4) Remove the return edges of the torso plates and add the white c-trim border 5) Paint job: Blue stripes, black buttons, anchor design on the ears, grey dropboxes. Is that it? And I have additional questions: - For the rectangular 5-button plate... Is the plate the same height (i.e. buttons are smaller)? Or is it taller (i.e. buttons as the same size)? - The 22mm kidney cutout notch.... can it stay there? It's not mentioned at all (I think) in the TKC CRL. Thanks

Found it.... I need coffee.

Can't find it either. It's not in the Ongoing Sales section. Where's the Detachment Merch page?

Cool stuff!

Je vais faire une petite visite de 4 jours à Paris en début septembre (ma 1ère fois)... Y'a-t-il des TK qui veulent prendre une petite bière?

Woo hoo!

STEPHANE VERREAULT 15359 Centurion Letter Thanks!

Hi everyone! Within a few days of being accepted in the Legion, I just got my Legion Centurion certification. This is AWESOME! Cheers

Thanks. It went so fast! I only got accepted in the Legion last Tuesday and i'm already level 3. This is awesome Stéphane

Thanks.

Thanks everyone! The wait (and suspense) is killing me though

Stephane Verreault 15359 EIB Letter Thank you!

General Info Name = Stephane Verreault TK Id = 15359 FISD name = Somatophylax Garrison = Canadian Garrison Squad = Imperial Fortress Body TypeHeight = 5’10" Weight = 160lbs CostumeArmor = AP Helmet= AP Blaster= Blastech E-11 (from AP) Boots = Imperial Boots Canvas belt = TKittell Hand Plates = ANH Stunt latex, painted white Electronics= Aker + iComm combo Neck Seal = Darman’s (zip enclosure) Holster = AP EIB Request thread http://www.whitearmor.net/forum/topic/32245-tk-15359-requesting-anh-stunt-eib-status-ap482 Front - Arms at side Back - Arms at side As recommended form my EIB application, I have reduced the straps between the back and kidney plates to shrink the gap. Although I’m not sure here if one of them snapped off or if I just did not stand straight enough for the pic. Left - Arm raised As recommended form my EIB application, I have reduced the straps between the ab and kidney plates to shrink the gap. Right - Arm raised As recommended form my EIB application, I have reduced the straps between the ab and kidney plates to shrink the gap. Ab/Kidney Attachment - Button Orientation Hand Plates (latex, painted white) Shoulder Bridge - Front Shoulder Bridge - Back Back/Chest Connection Thigh Pack Attachment (double-capped rivets, painted white) Knee Plate Dropbox - Back Cod and butt plate attachment Interior strapping Kidney Plate Notch Wrist side of forearms Helmet - Front Helmet - Sides Helmet - Back Helmet - Lens color Helmet - Hovi Mic Tip Detail Helmet - S-trim (this is the piece I cut off when I installed it… I preferred not to remove it for the pic) Blaster - Left Blaster - Right Neck seal Thermal detonator Holster attachment and ammo belt I thank you for your time in checking out my application. Cheers!

Expert Infantry Battalion level achieved! Thanks everyone for your help!

Thank you everyone! I'll have that Centurion application up very soon. Cheers!

Hi Chills, The decals I had came with the AP. They look too perfect... printer-perfect. I found it too difficult to apply. When I managed to properly smoothe a side, the other would pop out. Then, when I fixed that part, the first half would also pop out. I got frustrated and removed them. That's why I decided to just paint them.

The helmet is hand-painted.. except for the tube stripes. I tried to put on the decals.My hope was to use them as templates and paint "over" them. But I found that applying the decals was too much trouble. So I just painted the details.

The note card was to hide the ugly springy door-stopper thing. LOL

Thanks. Actually, the shoulder bridges were quite stiff when I took the pictures. I since boiled them to make a better curve as seen here: Here, you can see that the bridges have a nice curve and don't stick out This was taken at the recent Montreal ComicCon For the belt, I have since added extra velcro so that the entire length is now securely attached (and not loose). Thanks for any comment or suggestion. I'm here to improve it if need be

General Info Name = Stephane Verreault TK Id = 15359 FISD name = Somatophylax Garrison = Canadian Garrison Squad = Imperial Fortress Body Type Height = 5’10" Weight = 160lbs Costume Armor = Authentic Props (AP) Helmet= AP Blaster= Blastech E-11 (from AP) Boots = Imperial Boots Canvas belt = TKittell Hand Plates = ANH Stunt latex, painted white (Karin Sonnenschein) Electronics= Aker + iComm combo with throat mic Neck Seal = Darman’s (zip enclosure) Holster = AP Front - Arms at side Back - Arms at side Left - Arm raised Right - Arm raised Left side detail - Arm raised Right side detail - Arm raised Abdomen details Action shots Cod and butt plate attachment Interior strapping Helmet - Front Helmet - Sides Helmet - Back Helmet - Lens color Blaster - Left Blaster - Right Neck seal Thermal detonator Holster attachment and ammo belt Thank you.

Requesting access please. TK 15359 http://www.501st.com/members/displaymemberdetails.php?userID=19012 Thanks

TK-15359 reporting for duty. YES! I'm a Legionnaire!