TKedt

Are u chewbacca?

Its been about 5 months that I built the first prototype of this weapon in a low budget. Taking ideas from "CHUNK'S" original E-11 conversion tutorial and ideas from other troopers I have been improving it. This has been tested on the field and I had great response from people at troops and some fellow troopers. This is not a 100% accurate but it gets the job done. This is a small tutorial of how to build the weapon for about $50 and 1 weekend or less of your time. This also includes where to attach an action camera in case you want to document troops. I am not very good making tutorials but I have some pictures that may maker the build easier. You will need: Hasbro's Build A blaster gun with Stock. (The original barrel from the gun will not be use in this build). *Tripod (Couple of pieces of 1/2 inch pvc, couple of angle ends, couple of caps, couple of plugs and 1x ½ inch coupling) *2 screws *BARREL: *2 feet 1 1/4" PVC pipe (to match the barrel of the built a blaster) *Mouth wash cap *(1) 1-1/2 in. x 1-1/4 in. PVC Sch. 40 SPG x S Reducer Bushing *(1) 1 " coupling (1/2 slip on 1/2 threaded *(1) reducing coupling 1¾ x 1½ 2x 1 " “ coupler *1-1/2 in. x 1-1/4 in. PVC DWV Hub x Slip Joint Trap Adapter (this is to attach the main gun with the barrel) *Extras: * Leaf Rake (to make T- tracks) *1 tube of window crack sealer *Gorilla Heavy duty Duck tape *Dollar store cardboard sheet *E-6000 glue *Dremel *Black Spray paint (it is recommended to use one that adheres to plastic and has primer as well. *empty altoits box *empty ink cartridge *industrial strength Velcro *Templates for barrel’s holes and gun dimentions http://www.haui.eu/u...chnung_1zu1.zip You can find this used on ebay . New may be kinda expensive. *concentrate in the barrel first so then you can attached easily to the main gun and avoid excessive pressure on areas that may break . This is the tip of the gun: glue the mouthwash cap with the *(1) 1-1/2 in. x 1-1/4 in. PVC Sch. 40 SPG x S Reducer Bushing *(1) 1 ¼ coupling (1/2 slip on 1/2 threaded *(1) reducing coupling ¾ x ½ you may use a washer machine cable holder to simulate a cross hair. 2. *Cut the PVC pipe in 8 inch and 6 inch sections and attach them using the couplings *Make holes to the barrel with a dremel or drill (there is a link at the top to get templates) *Cut T-tracks from the Leaf Rake and glue them *Cut the 1/2 inch pipe in 12 inch sections and place caps 3. *Place the 1/2 coupling and fill it with the window sealer and place screws *Glue tripod to barrel 4 *Attach main gun to barrel using *1-1/2 in. x 1-1/4 in. PVC DWV Hub x Slip Joint Trap Adapter *add 3 inches of 1 1/4 pipe to connect the copuler from the main gun to the coupler from the barrel 5. *Cover the coupler with a piece of cardboard and then use duck tape to cover it. (when you paint it it will blend in) 6 *Extend stock using 4 inches of 1 1/4 inch pipe ( I got this tip from fumatroop) I used duck tape over to cover the pipe 7. (Optional) Add the box of altoids and empty ink cartridge (brother) Paint gun (I used satin black) Action Cam placement *Place velcro on the left side of the barrel *Tip: In order to get a good angle of focus place the camera where you can make eye contact with the lens This was taken with my action camera placed there Well, There you have it.

Awesome. Feel free to share. Sent from my HTC0P4E1 using Tapatalk

I live in Michigan and will be attending a troop in Canada. I am skeptical about taking my DLT -19 across the border because I may get stopped and the prop may get taken away when checking at customs. Anybody has experience taking prop weapons across the border?

awesome pics. I prefer pictures troopers interacting with con crowd. These look great!

You only have to tape THE BACK SIDE. Leave the front open[emoji3] Sent from my HTC0P4E1 using Tapatalk

Not sure if this topic has been shared before but I just want to share it with you. I have been trooping with the Icomm for about 1 year and I love it. People always say: "wow the voice effect sounds so cool!" However, it is very touchy and it goes at the minimum sound when in voice recognition. The PTT wears off with use and there is no other choice that voice recognition. I experienced that when I breathe or When I walk the icomm triggers itself causing and endless static burst and clicks. I was dwelling in my frustration when I realized that the mic was picking up sound FROM THE BACK. I insulated the back of the microphone by putting electrical tape over it (I used heavy duty Gorilla tape) I used about 3 layers so the mic does not pick up sound and turn a little bit downwards the front of the mic. in order to be as close to your mouth. Then, put back the mi foam. Now there is no triggering when breathing or walking. This is how it looks from the back of the mic (without the foam on) ----------

LOL. well you can go to walmart and get this -------------

Great pics and awesome armor! It was great trooping with you. Maker fair was my first troop last year and holds a special place in trooping. This is from the one this year:

looks great. Just consider taking the barrel off when drilling the holes. The pressure may hurt the joint where the barrel and main gun attach.

Look on eBay in the US . Even here is rare but keep looking Sent from my HTC0P4E1 using Tapatalk

that blaster used here is the hasbro "build a blaster". Look on ebay. New are very expensive

you can set it up facing towards the armor. I have been trooping with a voice amp and never had any issues with sweat damaging the speaker.

yes , will be handy at maker fair when you go outside!!

It lasted me about 5 hours Sent from my HTC0P4E1 using Tapatalk

Regular paper worked for me Sent from my HTC0P4E1 using Tapatalk

good choice. In my experience the build a blaster looks more accurate than the e-11. Seems like you got it all down.

Is this in the 501st site? Is this the new pack approved? Sent from my HTC0P4E1 using Tapatalk

Good luck bro[emoji3] Sent from my HTC0P4E1 using Tapatalk

Sent from my HTC0P4E1 using Tapatalk

Not sure if this has been mentioned but I just wanted to share it for troopers out there. Rain x anti fog works wonders if you don't have fans will n your bucket. I tested it in the field, I trooped a ball game yesterday in a 95.degree with high levels of humidity and no fog whatsoever. Sent from my HTC0P4E1 using Tapatalk

Sent from my HTC0P4E1 using Tapatalk

51505 Sent from my HTC0P4E1 using Tapatalk

51505 Sent from my HTC0P4E1 using Tapatalk

it's been a year since my 501st journey started. It started as a dream of attending the premier of a possible ep.VII (at the time there were only rumors of its production) in full stormtrooper armor. After seeing a report in local news channel about the 501st attending a star wars in concert and l watching videos of spoofs on youtube such asTROOPS FISD has been an fundamental resource in my 501st journey because I have made contact with people from other garrisons that gave me advise in times of need. People here have been nothing but helpful and I am very thankful for that After joining the legion I realized that the membership offered me more than what I believed I joined. The opportunity to bring, share and promote the magic of star wars to everyone in diverse settings and volunteer in the community I also realized of MY OWN STYLE OF TROOPING. While some people like to be background, I realized I am the trooper who likes to walk, interact with people and talk to them while staying in character. A year has passed and I feel the same excitement when trooping . After attending Hospital Visits, Comic cons, sports events, concerts and other events I realized how fulfilling trooping is and the positive impact on peoples lives and myself. So how did I measure my year? I measured it by putting in perspective what I have learned about me and having a positive impact in the community. I am exited about attending the premiere of TFA as a member and future troops as the new movies come out This is a collection of my most memorable moments from 7/14 to 7/15 and hope you enjoy them! .