Striker

If were cheaper it could be a good alternative however it cost more than my and other kits. I prefer resin as i can get all the details over a lower cost 3D printer. As for the stock it is a cool affect and as a E-11 seller i get many asking about a functional stock but the stocks were not shown open in the movie so the stock functionality is irrelevant as a E-11 replica. If someone was looking for a good sterling replica functional stocks would be nice.

For most yes but not everything

Which version were you wanting. All the stunts I have sold are centurion worthy as well.

lol

That would be awesome

You know this was just you Lou...stirring up excitement about your kits J/K

Well since this is a discussion I figured I should see what others felt about this. We all know casting originals are best and give our product the best details rather than 2nd generation cast anyways. With that being said most sterling cast from original molds like myself and Lou do have the 2nd gereration in them due to the work needed to fit the pipe. Even my Hasbro's seen here http://www.whitearmor.net/forum/topic/25591-new-hasbro-kit-molds-made/ are between a 2nd and 3rd due to the fact I have to mod some parts of the sterling to fit the Hasbro. The scope piece and stock fork were scracth built specifically for the Hasbro so they are definitely first generation. Some have PMed me about wanting aquire my scopes then ask where did I get them....I direct them here http://www.whitearmor.net/forum/topic/26652-new-scope-molds/ Now my question is what about my DL-44s? I dont want to buy a real mauser (spend over $2000) just to ruin it with mold material so I use a Denix. Most mausers out there are cast from a Denix and always felt this was a fine line to the point I even contacted them lol. They only responded with we cant sell to you because they already had their US whole-sellers and never mentioned frowning upon people like me using them in resin. Here is the DL-44 I am currently building http://www.whitearmor.net/forum/topic/26772-solo-esb-dl-44/ Now the DL-44 is the ONLY blaster i use cast from a maker like Denix and have sourced other original blaster parts that I am in the process of producing. I actually own Denix I chopped for the smaller barrel blaster and a full size as the GK is my next blaster I am building. I actually have the parts curing as I type lol (except the full body) Now on to some cool show pics.....take a look at how huge this spear gun is for the cloud city blaster The cloud city blaster is made from the Nemrod Galeon 1 spear gun...I have been looking for this and the Skiff gaurd balster for years and I now have them both. The spear gun was full size and was a pain to cut and disassemble to its current state. I have scaled it and have all the parts drawn out and will be making them to start casting soon. The skiff gaurds isan old Umarex /2nd hand Panther RO72 target pistol. Both of Nemrod and Umarex have multiple version but these are the correct ones My scratch built ElectroBinos masters, most of them are Frankensteined parts I made to my own liking....lol look at that Laundry cap Now my score, PRE revelle Renwal Visible V8....has all the parts needed for what I do

FYI, to all.....kits like these are a pain to mold. You definitly need to make 2 sets of molds lol. One mold of the parts, then get the parts pipe build ready then remold. Cost twice as much to start something like this. So like mine Lou will also have to have a 2ND generation cast on at the very least the folding stock parts and grip. Lou what are you making your mold boxes out of? I use wood but I seen people use Legos

Sounds good Lou, maybe we can swap some molding / casting tips. I am currently making mold boxes for my kit but I need to bulk up my inventory for a con in sept lol

Nice, thats the ROTJ version. I hope to have that completed soon as well

Yes, I am working on them currently but keep getting side tracked with E-11s I have sold just the add ons before I redid the molds and added more accurate parts. So far for the Greedo Killer I have the grill and M9 flash hider and am building up a mount and have a buddy that might let me cast his scope, if not that will have to wait for the search lol. As for the regular ANH I have all the parts but still need to mold them and I want to upgrade my scope mount. I am also very close to completly my ROTJ one as well. Now I am also working on my skiff guard blaster and just acquired the nemrod speargun to make the Relby blast "Cloud city" blaster

Yes Sir Thank you I know...its kind of like a trademark now. People are like "Thats Strikers picture" lol...I would hope its because they recognize the work but I know its the weathered hands

I know this is not a TK Blaster but since it was mentioned on my other threads I have had some PM for some pictures. So here is my Solo ESB Solo Blaster. Same durable resin, SEM paint dry brushed, Aluminum Scope rail and Hex bolts. I will be offering these blasters as well as my other E-11s FYI, I also have the greeblie to make the Luke rather than Han

Thanks all

How soon were you wanting this kit? I would like to remold my stuff before I start again but past few weeks have been hecktec and I am taking the speeder bike to a lexington KY con this weekend ;p

Thanks Vern

Its a cool idea however I am partial to the bracket, its easier to work with, and be interchanged and its accurate How is the rail secured on this? Looks like glue and filler maybe?

What kind of blaster were you thinking of? There are a few pipe builders here as well as plenty or reference pictures if you do it yourself. I provide both Pipe and Hasbro builds/parts if you don't want to bother with building one.

Thanks guys, I do sell all my parts. I just normally don't advertise runs as I sell them on various sites and others just PM me. Here are my Hasbro’s kits, I throw in a quick build guide as well http://www.whitearmor.net/forum/topic/25591-new-hasbro-kit-molds-made/#entry322159 Older build picks (The new kit really makes them stand out) http://www.whitearmor.net/forum/topic/22372-fs-modded-hasbro-e-11/#entry334810 Some pipe builds that I sell http://www.whitearmor.net/forum/topic/22801-fs-detailed-anh-e-11s-tk-td/#entry285847 My Custom ElectroBinoculars http://www.whitearmor.net/forum/topic/21765-custom-electrobinoculars/ Here is my eBAYs and Etsys page, eBAYs fees are much higher than Etsys, always best to just PM me though http://www.ebay.com/usr/pedro9240 Ebay https://www.etsy.com/shop/PETESxPLACE?ref=si_shop Etsys

Here are some pictures of my new scope casts Both M38 & M19 Real Scopes M19 Cold Cast M38 Cold Cast Since these are new molds I figured I throw them up here too lol Hasbro stock...Trophy Style I desided to make another counter as well. This one was made with the intention to have an easy application so the back details run along the edge to keep appearances but the middle back is flat This is a fully encapsulated counter http://www.whitearmor.net/forum/topic/25498-my-new-resin-counter/#entry321062 As an added FYI, I hope to redo my Pipe build molds soon, I just finished my Mauser, working on my Skiff Guard, and just picked up a base for the Relby-k23

Double post

I myself am also looking forward to seeing the pics. I texted you back about the scope and counter this morning but didnt get a reply. You mentioned your casting source for the scope and counter sold there stuff do you mean they were selling you molds or cast or letting you cast the originals?

PMed

Probably there was a kit produced on the RPF for about a few Hundred. This doesn't seem to be from the kit but since the kit was high price maybe he is thinking he can get a higher price since his are completed? Heck my custom built pones for about $100-$115 on ebay