Troopacoola

I have some spare. Pm me bud. Marc

Yeah. There should be no return edge at the wrist end [emoji106] Marc

If you use your phone, download the Tapatalk app and post images easily! Marc

Congratulations! Marc

It's just foam and felt really, along with black crafting foam lining the inside [emoji2] Marc

Congrats!!!!!!!!!! Welcome to the ranks trooper!!!! Marc

Good luck. Marc

I knew I'd read it somewhere! Marc

Hi Darren. Don't know about the USB set up, I have mine in the recess at the back of my lid running of the AA's. I think I read somewhere that some use a rechargeable 9v battery too??? Here's mine Marc

Hi Rob, are your biceps attached to the bells via elastic and poppers? If so, if you un pop them, do the top of the bells pull in closer? If that's a yes then it's not about reducing the bell to shoulder elastic. But, slightly increasing the bell to bicep elastic if that makes sense? Also, han hooks can pull the bell out Marc

This should be an easy application to pass mate!

Good luck bro! Marc

The knee ammo plate middle box should line up with the cover strip. An easy fix bud! Marc

Marc

Joseph is a star! You can't go wrong wrong there! Marc

Yes, black TD screws. Some do use split rivets which won't affect centurion applications as far as I'm aware. However, the ideal option would be single cap ones as long as the heads are the sizes posted above, you should be good to go....not sure if you have this info but will post the knee ammo measurements below. Marc

Knee ammo belt. The middle box should sit level with the bottom of the front cover strip. Single capped rivets were used to secure at either side then a blob of e6000 secured the front to the thigh Hope this helps. Marc

Here's another shot of my Centurion clearence pics buddy. You can use this for refference when fitting the belt. Marc

Makes sense mate! I didn't have any so worked with what I had. The boy has "lost" a lot of pens of late....well, I needed the springs! Marc

Here's how I did mine. A permanent marker and a soda can. Went for 11, maybe 12 coils of spring visible Marc

Thighs look good. Maybe a little off the rear to avoid butt plate overlap. But they look much better! Re the drop boxes, if the measurements on the belt are correct, I'd leave them be. Looking good C! Marc

Hello. Yeah, the belt needs raising. See below. There's also a diagram to help you make sure your measurements are good Marc

Who's been a busy boy then!? Marc

Nice work there brother! Marc

On the final stage of the lid renovation. All electronics removed and replaced. The only thing to left to do is install the wireless mic. Marc