Leaderboard

File Name: Star Wars Halloween Bucket Designer: Ciomara Campos Last Update: 18/10/2025 File/Link: https://www.printables.com/model/1448141-star-wars-halloween-bucket Description: Halloween Bucket Star wars themed, the W is slightly warped but overall a good bucket Images:

File Name: Galactic Empire (LED) Lantern Designer: 11Parsecs Last Update: 18/10/2025 File/Link: https://makerworld.com/en/models/1897528-galactic-empire-led-lantern-no-ams-no-glue?from=search#profileId-2033167 Description: Introducing G.E.L.: Galactic Empire Lantern v1! Even the Dark Side needs a little light sometimes! Inspired by adventures (and awesome set design) in a galaxy far, far away, this easy-to-print Galactic Empire Lantern requires no AMS, no supports, and no glue (depending on printer tolerances, you may opt for a drop of super glue to secure the magnets in place). Designed to simply fit together without any adhesive, all you need are your preferred filament colors, eight 5x2mm magnets, and a Bambu Lab RGB Puck Light (KC007) or equivalent. This super portable lantern measures 6" tall by 3.25" wide and makes for a great night light or just a fun ambient/mood light. After some experimentation, strong recommendation to use a white or light color for the internal light diffuser to make the most of the RGB LED colors. Supports are not required for the Galactic Empire sheath, but, as always, it does help to print at higher quality (and/or slower) for better output. NOTE: The 3mf includes two different options for the top – one is blank (situated with the other components) and the other includes a Galactic Empire logo. You only need to print 1 to complete the lantern. There are also unique print settings for the diffuser that are enabled if you use the designer profile. Images: Bill of Materials: Remote Controlled 16-color RGBW Puck Lights https://au.store.bambulab.com/products/remote-controlled-16-color-rgbw-puck-lights?skr=yes&id=45048703811747&modelId=1897528 Round Magnet https://au.store.bambulab.com/products/round-magnet?skr=yes&id=44604232368291&modelId=1897528

File Name: Star Wars Hologram Fan Emitter Designer: ScarfMeadow Last Update: 17/10/2025 File/Link: https://makerworld.com/en/models/1893822-star-wars-hologram-fan-emitter?from=search#profileId-2028956 Description: Step into a galaxy far, far away with the Star Wars Hologram Fan Emitter, the ultimate blend of sci-fi flair and modern LED tech. Inspired by the shimmering holograms and the sleek designs of Imperial engineering, this fan doesn’t just move air — it moves you to another dimension of style and comfort. Perfect for Jedi masters, Sith lords, the Star Wars Hologram Fan Emitter transforms any room into a scene straight out of the Death Star control room (minus the occasional explosion). Features & Highlights Holographic Projection Blades - Creates a mesmerising 3D hologram display effect while circulating cool air — project your favourite Star Wars characters, logos, or battle scenes as you chill like a true galactic hero. Jedi or Sith? - Switch between calming blue (Jedi) or fierce red (Sith) diffuser depending on your allegiance… or your mood. Hyperdrive Energy Efficiency - Powered by state-of-the-art energy cores (okay, fine — ultra-quiet brushless motors), includes an Imperial power generator giving you freedom to display your videos and images where ever you want. Because comfort is the way. Whether you’re meditating in your Jedi temple, plotting galactic domination, or just binge-watching the entire saga again, the Star Wars Hologram Fan Emitter brings style, light, and a touch of the Force into your everyday life. Join the Hologram Rebellion today — and may the cool be with you. Model Details There are 3 print profiles, one for the Bambu Lamp Kit, one for the Bambu Puck LED and one for the optional power bank case. Both the Bambu Lamp Kit version and the Bambu Puck LED version are suitable for using an LED strip light if you desire. The power bank case is designed with the listed power banks in mind but a .step file has been provided if you wish to modify to suit a different type/size power bank. If you are not going to use the power bank case ('Power Generator') then its recommended that you use the Bambu Puck LED or a LED strip light as the Bambu Lamp version requires you to place the switch on the cable (in the on position!) inside the emitter and use the power bank to turn the light on and off. See image below: If you choose to use the Bambu Lamp Kit or the Bambu Puck LED it is recommended that you apply some foil tape or tin foil to the inside front area of the emitter to help with light transmission/backlighting to the control panel. See image below: A full assembly guide and decal sheet has been provided. See ‘Documentation’ section.. Below is a full list of all the non-printable parts: 14cm 3D Hologram Fan Projector https://www.amazon.co.uk/dp/B0FH18MZY4?ref=ppx_yo2ov_dt_b_fed_asin_title 5000 mAh Ultra Slim Power Bank (2 pack) https://www.amazon.co.uk/dp/B08T1JCXR5?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 5x 5mm LED Diodes https://www.amazon.co.uk/dp/B09VBYDB9M?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_16 0.5 Inch Black Meshed Cord Protector https://www.amazon.co.uk/dp/B07FW3GTXB?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Lighting Solution: Bambu Lab Lamp Kit MH001 https://uk.store.bambulab.com/products/led-lamp-kit-001?id=41123227435068 OR Bambu Lab Puck LED KC007 https://uk.store.bambulab.com/products/remote-controlled-16-color-rgbw-puck-lights 1x M2 6mm Self Tapping Screw 2x M2 8mm Self Tapping Screws 1x M3 8mm Self Tapping Screw Star Wars Hologram Fan Emitter Demo: Images: PDF Instructions and Build of materials https://makerworld.com/en/models/1893822-star-wars-hologram-fan-emitter?from=search#profileId-2028956

Great to hear you having a positive experience and also getting help from fellow TK's. A great way to get feedback on your costume build is to post a build thread Good luck, hope to see you in shinny white and approved in the not-too-distant future

I actually use abs paste to seal my snaps to the armor.