Truimphmark

Yep done I only put R1 TK Sent from my iPad using Tapatalk Pro

Hi guys and girls here at shear tech maker of rubber e11 and many other blasters in rubber also e10 pipe builds and rubber hand guards. Right getting back to my post rubber hand guards for r1 tk going of a screen used hand guard I made these with going back to old school rather than 3d using plastic card made these and then made a mould and cast them in rubber these are cast in brown pigment I can cast these in any colour only problem is with the white pigment despite using a uv white pigment they still turn a off white my experience with the ANH hand guards so I’d say black then painted white maybe the better option .i reshaped them and the last picture is of the top two casts and the bottom two rubber ones Sent from my iPad using Tapatalk Pro

Hi guys and girls I’m mark from shear tech in the uk

Just a little note Steve rogers passed away around the mid 2013/14

Well done Amelie

Yeah I’ve used the frog tape I found I had as many bleeds as I had with the standard masking tape I must admit the blue tape worked really well the only reason had big roll of this blue masking tape as I 3d printed a rogue one lid and used it to under lay the tube stripes;)

Noted TBH the bleeds were minimal

Masked off for tube stripes and grey parts around the lid fitted mic tips and teeth mesh painted screw heads white

Hi guys and girls I’m helping my daughter to join the 501st UK GARRISON and I got this armour off a fellow member of the ukg and it had some yellowing (quite a lot) to the armour so looked in to doing the options of sanding down painting, but I haven’t got a time, so I looked on the Internet and looked on the forums and found the Trooperbay do a trooper white Gloop to bring back your whiteness of your armour so I tested a piece on a shoulder bell to see how it went. I was quite happy with it. Then I done the whole armour and I’m very happy with it and so is my daughter will be 18years old in a few days so she will become a member of the UKG. So here is the out come a few people have said that the armour may/will go back to yellowing as it abs. I also purchased a lid from imperial surplus which came yesterday so I knocked it up. Still have to boots to sort out and the blaster [emoji6]but I just may know someone who does them if you know me you’re know hahaha Sent from my iPad using Tapatalk Pro

Hi guys I make ESB greebies kit with m19 scope in uk

Request access tk12270 Costumes: TI - TIE Pilot: ANHTK - Stormtrooper: ANH StuntTI - TIE Pilot: First Order Name: Mark M Shearman Member ID: TI 12270 Member Since: October 2013 E-mail: [email protected] URL : http://[email protected] Garrison (rank): United Kingdom Garrison ( ) Profile updated: March 26, 2017

Here in the uk the air soft costs as nearly much as a deactived stirling but I would personally have the real stirling as it’s a far superior blaster than the s&t and to be honest there isn’t mush difference in the weight the stirling is still heavier only a little though Sent from my iPad using Tapatalk

It really depends on you as the S&t e11 still needs work doing to it T tracks and the counter and scope or the s&t stirling as your need to buy all the parts it really depends on what level of Accuracy you’re looking for if your looking at resin parts for the T tracks,scope,counter and power cylinders or the real deal I personally got the sterling and got the parts and made it my own Sent from my iPad using Tapatalk

Hi guys I sell these greebies in kit form have a look at my page on Facebook called shear tech

Sorry don’t come on here as much as I should really