Wallcrawler[TK] Posted April 16, 2018 Report Posted April 16, 2018 (edited) Nick Mathieu TK14804 FISD ID Wallcrawler UK Garrison EIB application thread : Thanks for reviewing my Centurion application! Additional images as recommended : Edited April 26, 2018 by Wallcrawler Quote
CableGuy[TK] Posted April 16, 2018 Report Posted April 16, 2018 What a beautiful set of RS armour. Just s little thing. You will need to add a picture showing the inside of the thigh ammo pack attachment. Also, can't quite tell from the picture if those are pan head slotted screws [highly recommended] or domed for the thermal detonator. Superb job, Nick. 1 Quote
Wallcrawler[TK] Posted April 16, 2018 Author Report Posted April 16, 2018 6 minutes ago, CableGuy said: What a beautiful set of RS armour. Just s little thing. You will need to add a picture showing the inside of the thigh ammo pack attachment. Also, can't quite tell from the picture if those are pan head slotted screws [required] or domed for the thermal detonator. Superb job, Nick. Thanks Dan, I'll do that now! Cheers for the help and feedback! 1 Quote
wook1138[TK] Posted April 16, 2018 Report Posted April 16, 2018 Looks great! You might want to add a picture of the hand guards being folded over to demonstrate that they are flexible. Good luck! 1 Quote
Shanester[TK] Posted April 16, 2018 Report Posted April 16, 2018 Impressive armor. You look like you stepped out of the movies. Good luck trooper! Quote
Wallcrawler[TK] Posted April 16, 2018 Author Report Posted April 16, 2018 26 minutes ago, wook1138 said: Looks great! You might want to add a picture of the hand guards being folded over to demonstrate that they are flexible. Good luck! Cheers Greg, thanks for the advice! Quote
Wallcrawler[TK] Posted April 16, 2018 Author Report Posted April 16, 2018 8 minutes ago, Shanester said: Impressive armor. You look like you stepped out of the movies. Good luck trooper! Thanks Shane! Appreciate it! 1 Quote
Wallcrawler[TK] Posted April 16, 2018 Author Report Posted April 16, 2018 50 minutes ago, CableGuy said: What a beautiful set of RS armour. Just s little thing. You will need to add a picture showing the inside of the thigh ammo pack attachment. Also, can't quite tell from the picture if those are pan head slotted screws [required] or domed for the thermal detonator. Superb job, Nick. I've reposted some images, Dan. Are the screws on the TD ok or too domed? Do they need to be flat? Quote
wook1138[TK] Posted April 16, 2018 Report Posted April 16, 2018 (edited) 11 minutes ago, Wallcrawler said: I've reposted some images, Dan. Are the screws on the TD ok or too domed? Do they need to be flat? Hey Nick. The screws are technically not a requirement for Centurion, just a recommendation for screen accuracy. That said, those are the wrong screws (I had the same issue in my Centurion application ). You need the pan head screws - so yeah, flat. EDIT: oops, they are required now. Edited April 16, 2018 by wook1138 1 Quote
Wallcrawler[TK] Posted April 16, 2018 Author Report Posted April 16, 2018 Hey Nick. The screws are technically not a requirement for Centurion, just a recommendation for screen accuracy. That said, those are the wrong screws (I had the same issue in my Centurion application ). You need the pan head screws - so yeah, flat. EDIT: oops, they are required now. Haha! Thanks for the help. Do you know the specific size and type needed? Sent from my iPhone using Tapatalk Quote
CableGuy[TK] Posted April 16, 2018 Report Posted April 16, 2018 Hiya. Yes, a little too domed. Here’s a reference pic. Pan head, slotted. There’s a few sellers on here that sell the right ones. :-)Sent from my iPhone using Tapatalk Quote
wook1138[TK] Posted April 16, 2018 Report Posted April 16, 2018 2 minutes ago, Wallcrawler said: Haha! Thanks for the help. Do you know the specific size and type needed? Sent from my iPhone using Tapatalk I used #6-32 brass slotted pan head machine screws. I used the 3/8” long one but 1/2” would work fine too. Quote
Wallcrawler[TK] Posted April 16, 2018 Author Report Posted April 16, 2018 I used #6-32 brass slotted pan head machine screws. I used the 3/8” long one but 1/2” would work fine too. Cheers for your help ! Sent from my iPhone using Tapatalk Quote
Wallcrawler[TK] Posted April 16, 2018 Author Report Posted April 16, 2018 Hiya. Yes, a little too domed. Here’s a reference pic. Pan head, slotted. There’s a few sellers on here that sell the right ones. :-)Sent from my iPhone using Tapatalk Great stuff! I’ll have a look round the forums to see who can source me some screws! Sent from my iPhone using Tapatalk 1 Quote
CableGuy[TK] Posted April 16, 2018 Report Posted April 16, 2018 Great stuff! I’ll have a look round the forums to see who can source me some screws! Sent from my iPhone using Tapatalk I’ll send you a PM with an ebay (UK) link as you’re in the UK. :-) 1 Quote
Wallcrawler[TK] Posted April 20, 2018 Author Report Posted April 20, 2018 All screws on TD swapped out. Tried to show the side on profile of the screws used. Are these ok? 1 Quote
CableGuy[TK] Posted April 20, 2018 Report Posted April 20, 2018 Pics are a little blurry but they look to be okay (I think). 1 Quote
Wallcrawler[TK] Posted April 20, 2018 Author Report Posted April 20, 2018 Pics are a little blurry but they look to be okay (I think). Ok thanks Dan, I’ll wait to hear then. 1 Quote
BDWC[TK] Posted April 23, 2018 Report Posted April 23, 2018 Your kit looks great, trooper! I didn't see your list of "who made what", but I absolutely love that blaster, can you tell me who made that or if it is a kit? Thanks so much! 1 Quote
Wallcrawler[TK] Posted April 23, 2018 Author Report Posted April 23, 2018 Your kit looks great, trooper! I didn't see your list of "who made what", but I absolutely love that blaster, can you tell me who made that or if it is a kit? Thanks so much! Thanks for your comments! The blaster is from RS Propmasters. She is a beaut! Sent from my iPhone using Tapatalk 1 Quote
ukswrath[Staff] Posted April 25, 2018 Report Posted April 25, 2018 Hey Nick Andrew or myself will be with you shortly. While you're waiting please post a link to your EIB application thank you The management Quote
ukswrath[Staff] Posted April 25, 2018 Report Posted April 25, 2018 Regarding the screws. Looking at he photo provided the CRL required type is "A". Your's appear to be "B" or "C". Quote
Wallcrawler[TK] Posted April 26, 2018 Author Report Posted April 26, 2018 12 hours ago, ukswrath said: Hey Nick Andrew or myself will be with you shortly. While you're waiting please post a link to your EIB application thank you The management Hi Tony, I've added a link to my EIB application to the first section of this thread. Thanks, Nick Quote
ukswrath[Staff] Posted April 26, 2018 Report Posted April 26, 2018 Hey Nick welcome back. Thank you for your Centurion application. CRL and Centurion Application Requirements: All required submission photos are present. Thank you for replacing the TD screws with the more correct type as suggested by your fellow troopers, and again beautiful job on your build. At this time Andrew and I would like to welcome you to Centurion. Great job! Other-Armor Fit/Assembly: Time to get out there and represent the Empire 1 Quote
CableGuy[TK] Posted April 26, 2018 Report Posted April 26, 2018 Well done, Nick. Excellent work. See you on the front lines. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.