OnlineJeff Posted February 9, 2015 Report Share Posted February 9, 2015 Test fit of my ATA thighs shows that the bottom of the thigh armor sits mid knee cap. I think the problem is that the upper rear of the thigh hits my butt. Should I try to trim the upper rear of the thigh to allow it to move up a bit? My concern is that if I do this the front peaks of the thigh will then be too high and I'll have to try to tim and shape them as well. I haven't trimmed or glued the thighs yet, this is a test fit putting them together with tape. Quote Link to comment Share on other sites More sharing options...
Pencap510 Posted February 9, 2015 Report Share Posted February 9, 2015 You might need to- I did. Pics? Quote Link to comment Share on other sites More sharing options...
fuumantroop[TK] Posted February 9, 2015 Report Share Posted February 9, 2015 I had to cut the tops of my AM thighs. But what i did was assembled the fronts of my thighs, then used the back to fit them to me. Do this first, then see if you need to take some of the length off. You want the thigh to sit above or maybe a little over ypur knee I still need to take more off of mine. 1 Quote Link to comment Share on other sites More sharing options...
OnlineJeff Posted February 9, 2015 Author Report Share Posted February 9, 2015 I'm going to go ahead and trim and glue the fronts and post some pics of how they sit. 1 Quote Link to comment Share on other sites More sharing options...
Holnave (evan_loh)[TK] Posted February 9, 2015 Report Share Posted February 9, 2015 (edited) You can trim the top back of your thighs like these so it won't poke into the bum. And also trim a little at the bottom back thigh and top back shin into a curve so the back of your knees has more space Edited February 9, 2015 by evan_loh Quote Link to comment Share on other sites More sharing options...
fuumantroop[TK] Posted February 13, 2015 Report Share Posted February 13, 2015 What i do if i need to trim the length of the thighs, is measure from the top however much i need to cut, and work my way around the thigh following the contour of the top. That way i dont have to worry about trimming too much and having the top fronts be too high Quote Link to comment Share on other sites More sharing options...
OnlineJeff Posted February 24, 2015 Author Report Share Posted February 24, 2015 I'm going to have to use 2" cover strips in the back and trim the back top of thigh (under my butt) to get them to sit and fit correctly. I could taper the rear cover strips maybe to close the armor near the knee better if that is best. Quote Link to comment Share on other sites More sharing options...
troopermaster Posted February 24, 2015 Report Share Posted February 24, 2015 That's exactly what I do for people with large thighs. You have to do whatever is necessary to make the parts fit regardless if it's screen accurate or not. 1 Quote Link to comment Share on other sites More sharing options...
Quadan[501st] Posted February 25, 2015 Report Share Posted February 25, 2015 ------------- I am having much the same problem. The thighs go up tp my berries and to mid kneecap.. thinking of triming at the tape line. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.