LadyInWhite[TK] Posted January 1, 2012 Report Share Posted January 1, 2012 Try as I might, my green lenses will not lay flat in my helmet. The eye bone area is not flat or flush to the curve. It ripples or has gaps or looks a bit warped. Should I try making it a little more flush? Or is there some nice technique for getting cellophane to have a nice "flat" appearance? I'm trying to avoid having gaps between the cellophane and the eye bone. And trying not to trim too closely. Or maybe nobody is perfect and I shouldn't worry too much about it? Thanks! Quote Link to comment Share on other sites More sharing options...
NoVATie[Admin] Posted January 1, 2012 Report Share Posted January 1, 2012 Before I got welder's shield lenses installed, my plastic had a hole in each end that slipped over the ear screw on each side to hold it in place. The sheet didn't perfectly match the contour of the helmet but it is what it is. Now I have the lenses glued in and I sit the cellophane behind it for extra darkess/flash protection. Quote Link to comment Share on other sites More sharing options...
FIVE[501st] Posted January 5, 2012 Report Share Posted January 5, 2012 Can you take a picture? A photo is worth 837 words. (inflation you know) Quote Link to comment Share on other sites More sharing options...
LadyInWhite[TK] Posted February 23, 2012 Author Report Share Posted February 23, 2012 (edited) Four eons later... This is what it looks like if you inspect it closely. My eyebone cut looks pretty straight, so it's something about the bulging INSIDE the helmet that's warping it. ----------- And here's what it looks like from a frontal, "untrained eye" point of view (aka someone wanting a photo)... --------- So maybe you can't really tell and I should let it go? Edited December 9, 2020 by gmrhodes13 link not working, removed gmrhodes13 2020 Quote Link to comment Share on other sites More sharing options...
SCTrooper[TK] Posted February 23, 2012 Report Share Posted February 23, 2012 the lense looks pretty thin, you can get one that is made of thicker material, so it wont ripple. TK4510 sells them and he is in CA Quote Link to comment Share on other sites More sharing options...
Darth Hilarious Posted February 24, 2012 Report Share Posted February 24, 2012 Personally, I'd try sanding/cutting more out from the inside, to make the curve smoother. There's a fair bit of flashing still there, so you shouldn't have to stress about cutting too much. Quote Link to comment Share on other sites More sharing options...
LadyInWhite[TK] Posted February 24, 2012 Author Report Share Posted February 24, 2012 Okee dokee! Quote Link to comment Share on other sites More sharing options...
JoeR Posted February 24, 2012 Report Share Posted February 24, 2012 The eyes need a bit more trimming to, this will also help. Particularly the left one as you look at the helmet. Have a look at some original helmets, they have much larger eye sockets. This will also give you better visibility! Quote Link to comment Share on other sites More sharing options...
TK9477 Posted February 24, 2012 Report Share Posted February 24, 2012 I had that issue after a bit of over fiddling (doh!), however it was always my intention to use the green grade 5 welding faceshield anyway. I just put a blob of milliput inside the snozzer, let it cure then screwed (self-tapper) the trimmed down faceshield in to it! Quote Link to comment Share on other sites More sharing options...
Griffin-X[TK] Posted February 24, 2012 Report Share Posted February 24, 2012 On 2/24/2012 at 6:42 PM, TK9477 said: I had that issue after a bit of over fiddling (doh!), however it was always my intention to use the green grade 5 welding faceshield anyway. I just put a blob of milliput inside the snozzer, let it cure then screwed (self-tapper) the trimmed down faceshield in to it! Cool idea...I dig your blue foam too Grant! Quote Link to comment Share on other sites More sharing options...
LadyInWhite[TK] Posted February 25, 2012 Author Report Share Posted February 25, 2012 AAHH very good, thanks! Yeah I could dig out a bit more on those eye sockets... man I hate to take that baby apart again!!! Afraid it'll be the "killing stroke" every time! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.