RogueTrooper[TK] Posted January 7, 2012 Report Posted January 7, 2012 Ok, now i've had some time to get rid of the tonnes of glue on my shins, how do i cover strip it? do i glue it straight on? or do i do it like a butt join but with velcro on one side as in the pictures earlier? I just don't see how the velcro would hold well on only half an inch of coverage... I just under lapped the integrated cover strip that was on the back of the AM shins ( this gave me a little bit more area for the velcro). or you could try this.. butt joint the back parts of the shins. Then add a strip to the inside of the back of the shin ( like a the cover strip but in reverse) . Make the inside strip larger (about 30mm wide) This should give you plenty of area for the industrial velcro.. See the new orange section of my diagram: Quote
Glitch[TK] Posted January 8, 2012 Author Report Posted January 8, 2012 Ok cool, so i can do an overlap thing (underlap the ridge part on the B leg part) but with a coverstrip on the A part of the leg? If not i'll probably do it the way Roguetrooper just described above. Quote
Glitch[TK] Posted January 9, 2012 Author Report Posted January 9, 2012 Ok so here's my green lenses And This is my right shin closed properly with an overlap. I should finish the left one later tonight, so if you need any more pictures or something let me know! Quote
dashrazor Posted January 10, 2012 Report Posted January 10, 2012 great work on the fixes! looks like you have everthing set. Approved! congratulations trooper Quote
matt black Posted January 10, 2012 Report Posted January 10, 2012 Congratulations Sean. Looking great trooper. Nice work on the shins. Quote
Glitch[TK] Posted January 10, 2012 Author Report Posted January 10, 2012 yaaaaaaaaay! thankyou! Quote
The Phantom[TK] Posted January 10, 2012 Report Posted January 10, 2012 Nice work mate...well done Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.