ocmano

Roger that. Should be able to do some more armor on shots after work. I think it'll be where it needs to be now. Sent from my SM-G955U1 using Tapatalk

Alright, Shins - Swapped the coverstrips and the velcro redone on shins. Opens on the inside now. Chest Gap - made a new elastic loop about a centimeter and half larger. Put it in the center bracket, now chest sits lower and isn't being pushed upwards. Wrist - lengthened the elastic about 2 cm of the bicep to wrist strap. Now wrists line up better. Waiting on shins drying before doing new pics. Sent from my SM-G955U1 using Tapatalk

Ugh, back of the shins. At least its E6000 so moving the cover strips shouldn't be a problem. Going to make the elastic loops a bit longer along the Ab to Chest. Not sure why, but feels like its pushing the chest up into my neck there. Could sit a little lower. Belt got shoved down on one side while I was tring to get the E11 in the holster. Probably need to holster it before putting the belt on. Sent from my SM-G955U1 using Tapatalk

Ok new pics with full suit and E11. Fixes: Shorter Strapping in Shoulder Bell to Shoulder. Close that gap. Longer Strap from Shoulder Bell to Bicep to let Bicep sit lower on arm. Trimmed edges of the Belt so they are angled. Blue Ab buttons painted with the lighter blue. E11 Action E11 from Praetorian Blasters Ok think that's it unless you guys need to see something else.

E11 arrived yesterday. [emoji3] Will update with new pics and shots of the blaster this weekend. Sent from my SM-G955U1 using Tapatalk

Heres the Thigh Ammo pictures and the Sniper knee. Already know the inside of the Ammo pack is a little short, but can't do much about it until I can find a new piece. Tapering in the bottom of the thighs helped a bit. Used to look WAY off. Added all the padding around the sniper knee to keep it from drifting to the outside, which seems to be a common problem. E11 should be here soon, so will another set of full suit and action pics. Adjusted the shoulder bell strap to pull them in more and added slack to let the biceps sit a little further down. Should make the arms a bit more correct. Sent from my SM-G955U1 using Tapatalk

Pictures wearing them or just the armor pieces off? Sent from my SM-G955U1 using Tapatalk

Ok belt edges angled now. Blue buttons repainted. They're lighter in person, but picture still looks dark. Sent from my SM-G955U1 using Tapatalk

Ah ok, have that one also. Easy enough. Sent from my SM-G955U1 using Tapatalk

Humbrol 48 Mediterranean Blue Gloss - 14ml Enamel Paint Sent from my SM-G955U1 using Tapatalk

Sure thing, have pics with various lighting conditions. Han Snap close up. Han Snap with different lighting.

Name: Aaron Countryman Height: 6'1" Weight: 235lbs FISD Name: ocmano Legion ID#: 91973 Profile Page: http://www.501st.com/members/displaymember.php?userID=26271&costumeID=124 Garrison: Washington State, USA - Titan Garrison Build Information Armor Maker: Armor Master 2.0 Helmet Maker: Armor Master 4.5 Hand Plates Type: Armor Master ABS Boots: Imperial Boots Canvas Belt: TrooperBay Holster Maker: Darman Gloves: Home Depot Rubber Gloves Electronics: Ukswraths hovi mic and fans Neck Seal: Darman E11 Blaster: Praetorian Blasters DLT19 Rifle: Hyperfirm B Grade Front Back Left Right Abdomen Details Action Shot (older photo before thigh modifications. Doing a new one once E11 arrives) Cod and Butt plate Interior Strapping Helmet - Front Helmet Side Helmet - Back Helmet - Screw Details Helmet - S Trim Helmet - Mic Tips Helmet - Lens Color E11 - Coming Soon Hopefully DLT19 - Left Right Neck Seal Thermal Detonator - Back Belt - Front Belt - Back Thank you for consideration! Let me know if you need anything else.

https://www.501st.com/members/displaymemberdetails.php?userID=26271 Requesting 501st access. Thanks!

Probably going to wait till I get either my Praetorian Blasters E11 or QuestProps E11 in first. I know the QuestProps should ship in October, no idea when Praetorian Blasters will. Sounds like they are having some health issues and too many orders.

Woot! Basic approved. Now perhaps onto Expert?

New Photos submitted with Tapered Thighs. Tighter Knee makes the ammo box look more correct, plus it seems like the thigh is more stable and not held up by the girder system so much. Probably could've set the Calf Velcro a bit better, but was in a bit of rush to get the pictures.

Knife worked great. Took off about 5cm from the bottom of the back, and now it tapers really well. Test fitted a couple times with blue tape, and don't think I should go any smaller. Trimmed up the back edge slightly as well for bit better movement with the calves. Drying again with e6000 then will put back in the interior strips after 12 hours. Hopefully ready to do follow up pictures for approval tomorrow night. Sent from my SM-G955U1 using Tapatalk

So submitted for basic, and looks like I need to redo the thigh slightly to taper it to the knee a bit tighter. I'll search around, but what's the best way to remove E6000 cover strips? I have exterior and interior cover strips I'll have to take off to trim the edges so I can get the taper. Pink lines in the picture.

Fronts were 25mm since its a bigger suit. I'm 6'1" and have pretty big legs so scaled the cover strips slightly larger. Sent from my SM-G955U1 using Tapatalk

Ah gotcha. Thsnks guys! Sent from my SM-G955U1 using Tapatalk

Here's some more pics. Sent from my SM-G955U1 using Tapatalk

So was looking at a Shepperton Design Studios E11 Collectors, but when I tried to order there was no option for the United States. Are they unable to ship to the US? If you've ordered and gotten one shipped, how'd you manage it? Thanks! Sent from my SM-G955U1 using Tapatalk

This help? Might have trimmed the inside end too much? Made the ends even when I was working on it. If it's way off I can probably order a new ammo plate from AM and redo it. Sent from my SM-G955U1 using Tapatalk

I'll take a look when I get home, might be the box just isn't laying straight in the picture, but yeah would be a easy fix. There some reason to go for Centurion other than bragging rights?

Thanks, already have joined 501st as Vader and have a SL ID: SL-91973 So do I just submit my pictures to Garrison Titan's GML?