Jump to content

ocmano

501st Stormtrooper[TK]
  • Posts

    127
  • Joined

  • Last visited

Everything posted by ocmano

  1. So was looking at a Shepperton Design Studios E11 Collectors, but when I tried to order there was no option for the United States. Are they unable to ship to the US? If you've ordered and gotten one shipped, how'd you manage it? Thanks! Sent from my SM-G955U1 using Tapatalk
  2. This help? Might have trimmed the inside end too much? Made the ends even when I was working on it. If it's way off I can probably order a new ammo plate from AM and redo it. Sent from my SM-G955U1 using Tapatalk
  3. I'll take a look when I get home, might be the box just isn't laying straight in the picture, but yeah would be a easy fix. There some reason to go for Centurion other than bragging rights?
  4. Thanks, already have joined 501st as Vader and have a SL ID: SL-91973 So do I just submit my pictures to Garrison Titan's GML?
  5. Wearing it, Changes from other selfie above: 1. Stop Strap to keep the chest from separating too far from the ABS and having a gap. 2. Belt moved down so top lines up with bottom of AB button plate. 3. Shoulders tightened from 1 inch of bell edge to snap middle, to 1/2 inch. Waiting on E11, then will be submitting. Do you have to do Basic first or can you go straight to Expert?
  6. TK Boots (nothing controversial there I hope)
  7. Belt, Dropboxes, and Holster. Did have to move the snaps on the belt to the edge to get the belt to line up correctly when wearing it.
  8. AB Buttons, Split Rivets, Strapping and Back.
  9. New helmet pics. This is with the tube stripes moved up within about a pencil width from the cheek. Had to repaint ears as well to try and sharpen them up.
  10. The Home Depot Rubber gloves with the AM provided hand plates. (Have the silicone hand plates from Trooperbay, but I don't like them as much)
  11. Thermal Detonator Screws. I know people get caught on these, hope these are correct.
  12. Already did. I'll upload more soon. Some of the pictures are already fixed. Sent from my SM-G955U1 using Tapatalk
  13. Here's the forearms close-up for inspection. Front return edge ground enough? Back Front
  14. I'll add individual piece pictures a bit later for review. Successfully could wear it by September 11th. Had a gap between the Chest Plate and AB plate opening up, likely due to the chest brackets being too short so it made the chest sit too high. Didn't make the brackets, so don't think I'll attempt to make longer ones. Instead, I put in a couple of snap plates and stick a stop strap between the Chest snd AB plate to keep them seperating too far. Tested it and worked pretty good. Will post updated pictures later. BTW: Can't believe the touchscreen on my phone worked with the rubber gloves on. Bonus! Sent from my SM-G955U1 using Tapatalk
  15. Day 11 - September 9 Helmet 1st coat painted (would need to redo the ear bumps later, and cleanup the chin). Tube stripes would need to be moved up as well (fixed now) Electronics in, and I could fit my giant head in there as well! [emoji16] Sent from my SM-G955U1 using Tapatalk
  16. Day 10 - September 8 Helmet constructed. Onto painting and adding in the electronics. Sent from my SM-G955U1 using Tapatalk
  17. Day 8 - September 6 Belt complete, Thermal Detonator complete. Onto helmet and painting. Sent from my SM-G955U1 using Tapatalk
  18. Day 7 - September 5 Appendages and body mostly done. Got great rubber gloves that fit XL. Belt, dropboxes, and thermal detonator in process. Sent from my SM-G955U1 using Tapatalk
  19. Day 4 - September 4 Shoulder strapping done. Interior coverstrips on arms drying, calves drying, thighs fitted and drying. Sent from my SM-G955U1 using Tapatalk
  20. Day 3 - September 1 - Forearms fitted and constructed. (Used E6000 with lots of magnets so I could have multiple pieces drying at the same time) Bought the premade Bracket System, and installed it onto the body plates. Biceps and Shoulders fitted and drying. Sent from my SM-G955U1 using Tapatalk
  21. This is a bit of a retroactive build thread. Only had 19 days to get the TK built while my wife was out of the country. Live in a townhouse that doesn't have a shop space, so took over the kitchen and used the balcony for cutting and sanding. Day 1 - August 30 - BBB day. Had used the list in the thread to make sure I had all tools, snaps, rivets, strapping, and glue ahead of time. AM pre-trimmed so that saved a lot of time. Started Arms first, legs next, body, then did helmet last. Sent from my SM-G955U1 using Tapatalk
  22. I'll do a retroactive build thread. Finished most of my build in 12 days, and took a few pictures, but didn't take the time to do a build thread. Had to get it done fast before my wife gets back from her trip since I was using the kitchen as a shop since I live in a townhouse. Only had 19 days to get this all done really. Got a stop strap with snap plates installed already and it stops the chest from pulling up too high. So that's 'fixed' for now. What I think is the real issue is the top brackets that go onto the chest plate ridge might be too short. If they were a centimeter or two longer it'd keep the chest down over the abs much better. Might eventually try and make my own longer brackets, but the stop strap seems to work really well for now. I'll get build thread started and post anything more over there.
  23. So got it all on, and the Bracket and Loops between the Chest and Abs seem to be 'pushing' the chest plate up above the top of the Ab plate when I raise my arms at all. Thinking of doing bigger elastic loops so the chest plate csn sit further down over the Abs. Think it'll help, or should I not worry about it? With my arms down the gap is gone. Would a 'stop strap' that's the length to stop the ABs and Chest from separating far enough, to make a gap, be permissible? Was thinking of putting in a couple snap plates on the Abs and Chest, right by the gap, then adding a short snap ended piece of black strapping to halt the two pieces from separating too far. Still could flex down, but the strap would stop it from flexing apart. Thoughts? Sent from my SM-G955U1 using Tapatalk
×
×
  • Create New...