DEVOLVER

It helps black out the helmet which in turn can assist in hiding your eyes through the lenses. It also helps black out the interior for your own vision and gives a more substantial appearance if a kid peeks under your bucket lol. I’ve also found it dampens ambient and internal sound somewhat. I also like the extra bit of heft it gives the bucket.

My experience with ArmoryShop has been one of the best I’ve ever had with a vendor so far. That’s where I got my Death Trooper helmet. Absolutely top notch with excellent customer service. If you’re iffy about reputation, don’t be. ArmoryShop is the go to dealer in the Death Trooper community. His armor is also the CRL standard for the Patrol Trooper. His finished Death Trooper armor runs around $1100 dollars or so, and I would imagine that’s the ballpark for the finished Sith armor when it goes up for sale. He’s already mentioned the full armor, completed, will not be available until after the release of TROS though. I assume he is holding off mainly to not be overbooked with preorders and to also make sure the armor meets the CRL requirements. If you visit the ArmoryShop Facebook page, they have been posting progress on the kit and so far it looks beautiful.

Those straps look great! Awesome pics from the troops, too.

I started making notes from the reference images regarding the "button box" and how it relates to the other parts on the pack. First was sizing. As you can see here, the button box is without a doubt as tall if not just a pixel or so smaller than the "center siphon". It also appears to be almost as wide: Initially, I thought the button box had the same depth as the siphon, but upon closer study, the button box is not as deep: And that can be seen very well in this image. From a side profile, the button box appears to be roughly half the depth of the siphon (marked with red). It's also interesting to see the side details of the overall pack itself. Also note the fact that the "antenna tube" is NOT fastened directly to the side of the pack, but rather at the outer most corner. Both of these observations are good notes for later in the build: With that idea in mind, I needed to find a box that was close in length to the Clorox Wipes tube I was going to use for the siphon. The Clorox Wipes tube is 8.5" inches in length and roughly 3" in width. I was not able to find the measurements exactly, but was able to find this box on Amazon: https://www.amazon.com/gp/product/B06XTGWCDS/ref=ppx_yo_dt_b_asin_title_o03__o00_s00?ie=UTF8&psc=1 It is a 8.3" x 2.8" x 0.98" pencil box. With this depth, I would also be able to stack them and reach the height I need if they were glued together. With this in mind, I ordered three for good measure. So here we see the pencil box(es) and the Clorox Wipes tube side by side compared to the screen reference: Not exact, but very close. Trying to get the right depth. Pictured here, I tried three boxes stacked initially: In the end, I think it's safe to say a stack of two will be about the same depth as seen in the game reference as compared to the depth of the siphon. The next step is to glue the lids down on the pencil boxes and get them fastened to each other.

A small update, but progress nonetheless. I have spent quite a bit of time (maybe too much) trying to reshape the siphon and make it symmetrical , and I have it to a point I am happy. As mentioned, I shortened the length of the overall siphon by cutting about 2" from the bottom: I then made a new flat bottom from styrene and attached it with CA glue: The areas that were indented and had the metric measurements were sanded down, refilled and reshaped with Milliput. At this point, I felt it was ready to install the "rivet" greeblie details as seen in screenshots from the game. These are 1/8" aluminum inch pop rivets with an 8mm grip: And overall, the siphon looks like this: And in comparison vs the game itself: I think it looks pretty close! As close as I can possibly get it, anyway. So I'm finally moving on to another part. I have some boxes on order from Amazon that I am hoping match my approximations for the "button box" which is the box located on the top left of the backpack: Until then...

A few small updates with the build: I have continued to work on the size, shape and detailing of the lower siphon to match reference material. I put Milliput around the rim of the cup and funnel section to fill in the gap and give a neater/more solid overall appearance. I then used my Dremel to shape the top of the funnel into a less flared shape: I then applied Milliput to the top of the lid and shaped into a dome, as seen in game reference. I then cut off the upper lip and reshaped the body to give it a bit more slope. The silver line is marked where I will cut the bottom off to get the appropriate proportion and length vs the rest of the pack: I also created a section from styrene and Milliput that will provide a flat surface for attaching the siphon. I thought this would be a little more stable than trying to rivet a circle: This was taken before I decided to mark the siphon for cutting off the bottom, but I did want to get an overall look at how it is shaping up: And did an overlap image to see the overall proportions of the pack vs reference: It's pretty close. The radio is a bit bigger in comparison, but I don't think it will affect the overall look. This definitely helps me plan ahead for placement and size of the remaining pieces. I think after some more shaping and sanding on the siphon, it will be ready for filler primer and paint followed by placing the rivet greeblie details.

That means a lot considering how awesome your jetpack turned out. Thanks man.

Moving on to the... I'll call it "lower siphon." I went parts hunting and ended up settling on these: It's a shaker bottle from Wal-Mart. It screws loose on the bottom to make the overall shape smaller: And this flower arranging thingy. I believe it is used for grave site decoration, but I think I can make it work: It came pre-filled with a very rigid green foam which I had to cut and scrape out to make it fully hollow. My next step was to combine these items to resemble the siphon. I removed the lid and bottom sections from my shaker cup, and shoved it as far down into the flower arranger as possible. I then used two 1/8" pop rivets in the back to make sure it wouldn't separate and the rivets wouldn't be visible: I could see that the profile for the overall siphon was far too tall and decided to cut off the grooves for the lid to give me a better shape to work with. Out came the Dremel cutting wheel, leaving me with this: There were also markers on the side of the shaker cup that I had to sand away and make smooth, starting with 150 grit and moving to 400 grit: I made a new flat lid from styrene and attached to the top with CA glue. Unfortunately, I forgot to get any pictures. So, going by reference images, there are two rows of four holes that should have a pop rivet (or similar) in each hole. I brought out the drill and got the holes spaced out and placed: My next task will be to be install the pop rivets and fill all the gaps for a seamless look. I will also continue to shape the overall profile of the piece so that it better matches the source material. In the meantime... I had initial worries about the mounting brackets for the backpack straps cutting into my backplate., but a quick test fit eased my concerns. The brackets don't even touch my backplate because of how the pack sits over the O || section. I will keep them as they are. I also got the initial fit for my shoulder pouch, too. It is looped on the backpack strap and will be held in place with snaps. I will also be installing a rare earth magnet under the top portion of my back plate and in the corresponding area of my pauldron to make sure it lays down flat against my back. Images are backward because of the mirror:

So, besides paint, I have completed the radio box. I got the knobs and lower panels fully installed and then used Milliput and Bondo to fill in and refine any open space and square up the box: I also got the other grid panel installed: Upon further review of the source images from the game, I noticed I had left out the ridge that separates the panel section from the dials. I used a metal ruler as a guide and cut the ridge into the face of the box with needle files. So, as seen here, I have tried to make this box as "screen accurate" as possible. A large round screw in the top right of the square frame area with two pop rivets in the lower right of the frame. The lower square on the left on of the radio has a screw in each corner. I know these are not CRL accurate, but they are without a doubt seen in multiple images from the game as well as the raw textures pulled from the game's data. If my GML goes strictly by the CRL image and disallows approval as is, I will fix it. In the meantime, I really like the look of it:

Congrats on approval!

Happy 2019 to all! I have a few small updates: My biggest goal on this radio was to give a sense of depth. For the entire build, I have been building "up" but you can only go so far before it gets unwieldy to attach more layers. The only place left was to go down: I measured and cut the areas out of the photo box and then glued the new styrene layers on top. I started working on the dial area recently. My goal here was to make it look akin to what the old Sonix radios look like. I notice that most of the dials on those are inset, as seen here: ------------ I cut out two pieces of styrene and traced the shape of the dials onto one of the pieces after measuring where they should be placed. I then attached the two pieces together via E6000: For the dials, I am using light switch dimmer knobs that can be found at Lowes or any other hardware store. I laid them in to check the fit: One detail I wanted to achieve on the pack is that the dials actually turn. I just wanted to have this for the sake of "realism" . I used to work on guitars a bit and remembered I had some left over potentiometers aka volume knobs. They looked perfect and fit the knobs exactly. These in particular are DiMarzio 250k split shaft: With the knob attached: I also wanted to match the greeblies and screws to the game screen shot reference seen here: When zoomed in, the greeblies circled in red are either small machine screws or pop rivets painted black. The greeblie circled with blue is a machine screw or the like painted black. The CRL states: Backpack must be styled after and closely matches the backpack seen in the Battlefront series as seen in reference photos. No video monitors, extra greeblies. lights of any sort or attachments not seen in photos can be visible. Well, there it is in an actual screenshot image directly from the game. So onward! For the big screw in the top right, I used these. Metric pan head screws in size M5-.80x25mm. You will need the corresponding nut and washer, of course: For the smaller greeblies, I used a hammer to remove the center section of a 1/8" pop rivet: Drilled the appropriate holes and laid them in. The pop rivets will be glued in. So, roughly, here's what we have so far using rough placement: I still need to cut and place the lower panels of course. After that, I will begin filling in gaps and smoothing out details with bondo and milliput before painting.

Yeah, I think the panel is pretty cool. It adds some depth and detail to an otherwise plain side. I am going for 501st HWT approval, but if I don't get approved with this pack, I won't be too torn up about it. I can build another one sometime down the road that is CRL exact at some point. On this build, I just really wanted to challenge myself to translate what I see on screen to an actual prop. Honestly, I may have already gone just enough of the rails with my build as to not get approved. Maybe mid-build I'll 180 and just do the CRL, I don't know lol.

I got some progress done on my main "radio" box. The basic shape of the box is now cut out. This is pretty much just a basic blank slate and there are still details I need to cut and sculpt in: The black sections are a layers of styrene and rigid foam core board. I am slowly building up layers to match the visual reference and give an overall sense of depth. For the sides of the box, I am trying to match the details of the circled section in this reference image: I also got the basic side details cut out and attached on one side. I will have to do this to the other side too as per reference images. At the moment, this is purely foam core, but i will be shaping and detailing with Milliput, Green Stuff and Bondo. I will use Milliput and Bondo in areas that need to be smooth and won't need excessive flex and Green Stuff for areas that will need to have a bit of flex: One note if you've never worked with styrene (I hadn't) is to not use the "score and snap" method that is commonly used with ABS construction. This stuff is a bit brittle, and even when scored, sometimes breaks off sections that are beyond your initial cut. I find it easier to just lightly run a shop knife across your marked cut line to get your rough cut and then slice all the way through without bending the scored section. The foam core board also doesn't take kindly to CA glue, so I have been using E6000. The E6000 holds perfectly and is easy to clean up where it may run, just like ABS armor. That's all for now! Happy Holidays to all of you! I will start back on the project once Christmas is over.

That is the best combo, lol. Super clean build, man. I love it. I am going to take this into consideration for sure and most likely experiment with a few methods. I still haven’t even gotten a chance to see how much contact there is to the back plate yet.

Thanks Joseph, that is super helpful. Depending on how the straps end up fitting and feeling, I may change them out. I may even change out the brackets the top straps are fitted to and leave the bottom brackets as they are. The good thing about these brackets with hooks is that if the wide backpack straps end up putting too much weight on my shoulder bridges, I can just make some thin nylon straps with hooks and change them out. We'll see how it goes. I do have a few ideas of how to cover the brackets with rubber as well, but it's really just a trial and error type thing right now. I will most likely line the edge of the hole with rubber trim and may go so far as to line the area around it with a thin craft foam.

I managed to pick up some nuts and bolts for attaching the ceiling hooks for the straps. For anyone who buys these hooks, these are flat head Phillips #8-32 1/4 IN: I backed them with some small washers and got everything attached: The straps are just standard backpack straps compatible for hiking packs and ALICE packs. They're very padded and feel pretty comfortable. Here's the part link for reference: (https://www.amazon.com/gp/product/B078VZXDM5/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) The only problem I can see with this setup is the top hooks putting pressure against my backplate and creating dents or scratches. If it comes it that, I will pad them in some way. Otherwise, it feels good and works! I will eventually paint the reflective strips black. I don't want to be spotted by Rebels.

Here is the link to the item on Amazon: https://www.amazon.com/dp/B079JS86R5/ref=cm_sw_r_oth_api_i_3hVfCb7YNGRC4 I bought the 6mm 4-pack.

FINALLY started working on my HWT backpack if you would like to follow the progress!

Hey Troopers! I'm finally getting around to building my HWT pack. From the very beginning of my ANH Stunt armor build, I have wanted to have the ability to also troop as a Heavy Weapons Trooper. I loved the original Battlefront series and there is something undeniably cool about the look of a Stormtrooper who has been through the rigor or battle and is equipped to stay in the field and provide fire support for his squad. I have read through and looked at many, many pack builds at this point and I am very thankful that my fellow troopers have already researched and gone through most of the trouble to provide visual reference and figure out how this build should be done in the first place. I have to give a large amount of credit to Tony and Joseph for their pioneering into the HWT trooper and the building resources they have provided. I will be using previous build threads as a basic outline to my plans, but I will be trying to match my pack as closely as I can (within my meager ability) to screen capture reference. I will be eyeballing most of the measurements and building to match what I see on screen in an attempt to put that item in hand (or on my back as it were). Let's get started! My first points of reference where the screen captures provided here on FISD: And secondly, previously built packs which have been approved: I also wanted to bring in a sense of real world "used" technology, just like props from the Original Trilogy. I ended up looking at Vietnam War era radio and communications packs.: The weathering on these radios and also the way the metal is finished and pressed gives me some inspiration on what this pack would actually look like in the real world. The screen reference can only take us so far when taken from a videogame with low res models and textures. Lastly, I also wanted to use OT screen used props (and their replicas) as reference as well. Packs seen in the films such as the ones Sandtroopers wore give me ideas for weathering, scale and detail. The radio seen on the Sandtrooper's pack is a real life found object and helps give a sense of what "real" Imperial technology would look like. To begin, I had to get a base for the pack. Most, if not ALL, builds use an oil drain pan and mine is no different. Why fix what isn't broken? I toyed around with different depths and sizes in deciding which pan to get. I ended up finding one on Amazon made by Garage Boss. It is relatively thin, which will keep me from being super thick while trooping. The first thing was to remove the center area to give my back plate room to rest. I brought out the Dremel cutting wheel. Mountains of black plastic dust later, the center was removed. This hole is also going to give me access to the inside of the pack for attaching the boxes, etc. in the future with bolts and/or pop rivets. I also removed the yellow plug for good measure. I will be covering that hole later: I have decided to go with ALICE style backpack straps for their comfort and versatility. I bought this hooks to attach them. They are standard ceiling mount hooks: Measured out and placed the mounts. I tried to put them in a placement that would be similar to how they are used on an actual ALICE backpack, then I marked them for drilling: Moving on, I decided to use my reference pictures to freehand sketch the layout of my radio. My plan is to use a sheet of PVC to build layers of depth and detail similar to what would be seen on screen. When I look at this picture, I see what seems to be multiple levels of varying depth that create different shadows across the radio. To be completely honest, I also see screws and/or rivets that are in different spots than what the CRL shows. I don't mean to rock the boat, but I am going to place my fasteners where I see them in the screencaps. Going by the second image, I also see some patterns that have not been addressed in the previous builds. I am going to attempt to recreate all of this. I used the recommended photo storage box from previous builds. The dimensions are 11.2 x 7.8 x 4.5 inches. So I got this sketched out with a rough idea of how many layers I will need to lay down to achieve the look I want. Front: Side: And that's where we're at for now. I will be out of town for the coming weekend, but I plan on getting some more work done once the Holiday Season winds down.

I just wanted to say it’s cool to see an OG member getting back into the hobby. Great mods on your kit man! Hopefully you’ll be trooping again ASAP.

You look incredible! Now you’re making me want to go FOTK!

Very nice! I will be starting on my backpack soon and will definitely be using your build for tips.

I'm sorry to hear about the original armor, but I'm glad you've found a good alternative. My wife has been having a similar issue regarding an officer poncho. Zero communication. The way I see it, you have the customer's cash in hand, you OWE them communication as part of the product. A Cardinal build would be awesome, hopefully a CRL gets worked out for that eventually. And btw, do you know if JSIN Props is doing a First Order TIE pilot? Clearly he does FOTK.

Congrats! Have fun trooping!

Congrats Jim! These are relatively easy fixes for Centurion.