TK20187

Welcome the FISD, I look forward to seeing your progress Sent from my SM-G960F using Tapatalk

Definitely check out the Incinerator build section on the forum and follow the CRL. To paint your armour you'll want to trim and build all your pieces first. Then mask and paint. I have a Shock Trooper and red appears to be the same, I used the Rustoleum Gloss Apple Red. Sent from my SM-G960F using Tapatalk

Hiya and welcome to the FISD. Sent from my SM-G960F using Tapatalk

Welcome to the FISD. Sent from my SM-G960F using Tapatalk

Congratulations Trooper and welcome to the Legion Sent from my SM-G960F using Tapatalk

If your interested in the Incinerator Trooper check out the specific build section on the forum for previously built armour, tips and tricks specific to this armour. Link below https://r.tapatalk.com/shareLink?url=https://www.whitearmor.net/forum/forum/54-incinerator-trooper/&share_sfid=54&share_fid=44557&share_type=sf And definitely follow the CRL. Good luck and create your own build thread so we can follow your progress and advise help along the way. And welcome to the wonderful world of white armour. Sent from my SM-G960F using Tapatalk

Hi Future Trooper and welcome to the FISD. A great place to start is the Getting Started threads. https://r.tapatalk.com/shareLink?url=https://www.whitearmor.net/forum/forum/38-getting-started-read-this-first/&share_sfid=38&share_fid=44557&share_type=sf Lots of resources and reading to get you on the right path. Sent from my SM-G960F using Tapatalk

Welcome to the FISD future Trooper(s) and good luck with your build(s) Sent from my SM-G960F using Tapatalk

Welcome to the FISD future trooper. Sent from my SM-G960F using Tapatalk

Hi future Trooper and welcome to the FISD. Sent from my SM-G960F using Tapatalk

Looking good trooper, you may want to lower your left thigh or raise your right one so they both have the same gap with your cod piece. Also a piece of foam in your left thigh would also help to straight it up a bit (a common problem). Also see if your biceps can be lifted a bit, will help with arm mobility. Sent from my SM-G960F using Tapatalk

Welcome to the FISD Jenny. Sent from my SM-G960F using Tapatalk

Looking great trooper and welcome to the Legion. Fyi, I have glued a piece of doubled elastic across the inside of my chest piece, the speaker then just hooks on and no issues with velcro coming away. Sent from my SM-G960F using Tapatalk

Great news. Sent from my SM-G960F using Tapatalk

Congratulations Trooper and welcome to the Legion. Sent from my SM-G960F using Tapatalk

Hi Alex, how did you go? Sent from my SM-G960F using Tapatalk

TK20187 approved, report to the battlefront and await your orders trooper. Sent from my SM-G960F using Tapatalk

Trim some from your return edges etc Sent from my SM-G960F using Tapatalk

It's best to use some trimmings from your kit, that way you'll get a good colour match Sent from my SM-G960F using Tapatalk

You can use some abs paste to fix the hole. I'd glue a piece of Abs behind the hoke, then fiill the crack with ABS paste (100% pure acetone and ABS trimmings) and sand down when its dried. Avoid using nail varnish remover as its just not strong enough. Sent from my SM-G960F using Tapatalk

Thanks for the feedback. I'm currently using my custom boots (Chelsea style painted boots) which have a shorter neck than the boots I'll be getting from Imperial Boots in the New Year. I also haven't got any snaps on the belt/ab yet, I'll be installing them today to keep the belt in place. Thanks again and I appreciate the positive feedback and guidance. Cheers Troy Sent from my SM-G960F using Tapatalk

4 and half months after starting and learning a lot of new armour building skills I've suited up for the first time in my new Shock Trooper armour. Pictures for submission of my 2nd set of 501st armour have been taken, deployment is imminent . Sent from my SM-G960F using Tapatalk

Your coming with me....... Sent from my SM-G960F using Tapatalk

Congrats and welcome to the Legion Trooper Sent from my SM-G960F using Tapatalk

Shock Trooper belt and TD finished today. Also glued in my lenses and added some padding. All strapping completed, so may take some submission pics after everything sets overnight. Sent from my SM-G960F using Tapatalk