kevin926

Are there any build threads for a Clone trooper scratch build off the prints here. Clone DC-15S Carbine Thanks in advance

Yikes, not even close. What are people using. All I'm seeing are 3d prints

This site has certainly changed alot since I've built my E 11 and Helmet. I had a question regarding building and F11 and that is . Do they have a toy version like the E11 toy conversions that can be made to be more accurate?

Hello all. Happy new year. May 2021 be better to all of us. I'm researching a first order blaster now. New project with my son.

You know, I have to say, I'm really glad I did these build logs. It's fun to go back through them years later. It's almost like I'm making this over again.

Hello people, just popping in. Been really busy with work. I hope all is well with everyone

I knew I could pull you to the dark side. Payback for pulling me to therpf.

There is a tutorial on the scope and counter bracket that may help. What version are you making. Also, whats your plans for the track? Looking good!

Good job! What's your next move?

Welcome aboard Mr.Halliwax. You are in the right place. These guys were a great help with my build. Don't be shy. Most of these builders will jump in and love to help. Good luck with the build Which version are you making. Be sure to follow the correct greebies. ANH is different than ESB or ROTJ. There are plenty of reference photos available

Hello people. I'm looking to speak with a member close to the summer filed area in South Carolina . Please pm me . I can't really let the cat out of the bag just yet ,but this is in regards to a friend of the garrison. Thanks in advance. Kevin

Just popping in to say hello to everyone. I have been harassing other forums getting info and lessons on building other props. I will share if I'm allowed to post non trooper items. I am currently working on a snowtrooper scratch build. Bucket only. (For now) I may find it nessesarry to make a matching weapon but we will see.

Where might I find dimensions for a snowtrooper helmet build. I know there are kits available however, I'm going for the uneven look. The kits I have seen are all uniform and even. Are there any builds going on here. I have been searching with no luck. Any help would be greatly appreciated. Thanks in advance.Kevin

How would I get in touch with troopermaster?

Thanks guys.great info as always. I would like to look into the vacuformed helmets seeing how it seems they were used on the original film props. It may seem odd Im trying to use the same material vrs fiberglass or resin, however, all my other props I have made besides my r2d2, have been really close to the same as the original.

did they use abs on the original movie props

As always, you guys are great with helping, thanks guys. My main question is regarding materials. What were the main materials used for these helmets. Abs?

I bought an ATA bucket last year. I recently finished it alone with adding Aarons interior kit. This kit was vacuformed abs and accurate to film standards. I'm looking for a kit just like it for a tie fighter or AT AT driver. I'm also looking for a snowtrooper helmet kit. Were these helmets made from the same materials as the stormtrooper TK helmets, or did they use fiberglass or other materials. I'm more of a collector with the ambition of keeping these as close as possible to film accurate, weathered and beaten. I won't be wearing them, only displaying. Any tips or info would be greatly appreciated. I did find a source for lukes x wing kit and that's vacuformed abs. So my asks are, materials used on the originals, and where might I find one. Thanks in advance. Kevin

I am too tall I think. Lol. I would like to find plans for the shoulder being this is a sandtrooper bucket. Might be cool to make a bust display out of this. I'm 6'3 and most of the trooperS I have seen were average height. I might be able to pull off vader.

wow, that's like a badge of honor coming from you. Thank you. the fabric is actually a heavy felt. An upgrade if you will from craft grade felt. I bought it at hobby lobby. they sell it in yards for 5.99 I used hot glue to hold it in place which is great if you ever need to remove it. I applied the glue to the fabric and tucked in place. here is a link http://www.hobbylobby.com/Fabric-Sewing/Utility-Fabrics/Felt-Fabric/Black-Solid-Plush-Felt-Fabric/p/109533 As far as my weathering technique, its really simple. A lot of dry brushing, LOTS ! followed by a little Tamiya weathering kits. I spent countless hours learning how to dry brush and paint wash from some unbelievable artists, I mean these guys and ladies can take anything to the next level, but I have to admit, I love these weathering kits. I still dry brush at least 90% of the project however I find these kits give or add depth over detail. The sad part is, they are getting harder to find. ebay has them, but don't get too wrapped up with all the colors. I just stick to the foundations and colors I'm working with.

So, I built my bucket. There are so many bucket builds on here, I figured I would just post a couple pics here along with my blaster. The only mod I made was lining the inside of the helmet and adding Aarons awesome interior kit. The bucket is from ATA. The details are hand painted and I used trooper bay stripes. This is also a sandtrooper build. No electronics and this will only be a display piece. Fun kit and happy with the outcome. Here are a couple of wips, but mostly the finished product. I still need to paint the ear screws white and I am looking for a part I will like for the inside ears. Enjoy. That's all folks. Thank you everyone for the inspiration and encouragement. A special thank you to Aaron once again for his awesome kits.

Thank you. I did try again on weathering my son's blaster. He likes mine but still doesn't want his dirty. (In his own words) He has autism, not major, but still on the spectrum and has issues with coping and when he as his mind set, it's set. <br><br> As far as the counter goes, it's all plastic. I may go back to it and add the inside parts but they would have to be made from scratch. As shown in the photos above, it looks like a cast of the original and later poured with hard plastic. The cover is fully detailed and comes with plastic screws.<br><br> My dislikes are the spade connectors. Flimsy easy to break thin plastic.<br><br> But that's it. As far as the dislikes.<br><br> I changed them to metal as well as the screws to hold the cover.<br><br> The marker or paper looking center, is paper with thin plastic over it. Printed as far as I can tell. Also comes with another printed part for the numbers. <br><br> Again, I can go back to the insides and change them later (maybe) still for 65.00 free ship, it was worth having a look at.

I would like to give thanks to everyone here for the encouragement and support along the way. Also a very special thank you to Aaron, themainthesuitcase, Dday, fieldmarshall and gaz for supplying me with your awsome parts! A sincere thank you, you guys are really terrific for a bunch of supposed to be yucky stormtroopers lol.now I'm onto my bucket build.

I was trying to update last week, however for some reason i did see my tool bar to upload photos. So this is what i can share now. I have finished and very happy with the turn out. As I was trying to share the counter with you, here it is. Here is my completed project. now with extras

Where can I find some parts I'm looking for.this would be for tfa trooper helmet. Looking for a mic or actuator, lenses and mouth mesh screen. Any info would be highly appreciated. Thanks in advance.Kevin