ayen_s

Part 2 unboxing: Comparison shot: Left: Hasbro, Right: Anovos Comparison shot: Left: Hasbro, Right: Anovos If you want details picture of the parts, please let me know. Sent from my iPhone using Tapatalk

I bought one. Unboxing pictures below. Part 1 of unboxing. Sent from my iPhone using Tapatalk

http://www.whitearmor.net/forum/topic/29798-wearing-glasses-while-in-a-bucket-the-real-reason-why-tks-cant-aim/ Previous thread Sent from my iPhone using Tapatalk

Install the new bigger mesh. Dap superglue sparingly to the edge. Reinstall hovi mic to bucket. Looks better right? Sent from my iPhone using Tapatalk

Yes, this what I mention before. BTW, the lenses from old spectacle or you order new? awkward to order new lenses from optician without frame.

I dont wear eye glass during troop. I can see near object fine. Far away object bit blurry though. I did saw some one attaching his spectacles lenses directly to his inside visor. Cant remember how, probably with hot glue.

Remove masking tape. Apply new masking tape. This time leave some gap on the tip. Spray some white paint on flat surface. Dip the hovi mic tip on the wet paint. You will get the fine thin white ring on the tip. Remove masking tape after paint dried. Sent from my iPhone using Tapatalk

I remove the mesh after i am happy with the fit. Apply masking tape to outside of the hovi mic. Spray paint the inside with gloss white paint. Wait paint to dry. Sent from my iPhone using Tapatalk

Hovi Mic accuracy update: Trial fit the new mesh. Sent from my iPhone using Tapatalk

Ok, now with superglue. Now waiting it to dry. Sent from my iPhone using Tapatalk

Hovi Mic Accuracy update: From CRL pictures, the hovi mic screen each mesh size approximately 2mm. The internal diameter of the hovi mic tip is 16mm. I found marker pen body have 15mm++ outer diameter. Will use it to shape the mesh. Found a small sieve that have suitable mesh. Take out from the frame. Flatten it out. Hard to keep the molded mesh shape after trimming to size. Tried using E600 and got this big gunk at the end. Will look into other method. Sent from my iPhone using Tapatalk

Thank you Tino for the suggestion. Your kit is one of the recommended upgrade in FISD. Regarding the painting, appriciate the link. Will read it all up. Sent from my iPhone using Tapatalk

Good clean build sir. Awesome armor. Sent from my iPhone using Tapatalk

I am starting my build to have my own E-11. No stormtrooper is complete without their E-11 blaster. Due to restriction in importing weapon look alike item into my country, i went with a Doopydoos E-11 resin full kit. Less risk for it to be confiscated by customs etc. Doing a build thread so I can compile my research and findings while waiting for the kit to arrive. Reference build thread: 1. Themaninthesuitcase 2. T-Jay 3. DM101 3. Painting the Doopydoos E-11 Upgrade parts: Below are my wish list for better looking E-11 1. T-Jay Completion Sets for E-11 2. Gazmosis Replacement Magazines 3. Suitcase Props 3D Printed E-11 parts 4. Screen-accurate E11 Power Cylinders 5. E-11 Blaster D-Ring Trooperbay Tools: 1. Super glue 2. Tamiya putty 3. Grey Surfacer paint 4. Silver gloss paint 5. Black gloss paint (body) 6. Black satin paint (grip) 7. Brass satin paint (scope) 8. Gunmetal satin paint (t-tracks) 9. Paint brush 10. Sand paper 11. File 12. Drill 13. Drill bit (3/8",7/16") Parts: 1. DoopyDoos Resin kit (order 1/9/2016) (reorder and arrive on 3/8/2017) c/w 1.1 Main barrel 1.2 Folding stock-rear 1.3 Hengstler counter 1.4 Scope 1.5 Grip handle 1.6 Sling swivel keeper 1.7 Front sight 1.8 Trigger 1.9 Magazine 1.10 Magazine receiver 1.11 Power cell-fuse 1.12 Rear stock catch 1.13 Bayonet lug 1.14 Muzzle flash guard 1.15 Ejector guard 1.16 Charging handle 1.17 Rear flip-up sight 1.18 Magazine release button 1.20 Selector switch 1.21 End cap 1.22 Trigger guard 2. Aluminium flat bar (purchased 7/9/2016) 3. Socket Head Cap Screw M6 (grip) 4. Socket Head Cap Screw 1/4-20 (muzzle) Work in progress. Will continue update during my research.

Your tusken rider sure look menacing. Excellent job. Sent from my iPhone using Tapatalk

Your tusken raider sure look menacing. Excellent job. Sent from my iPhone using Tapatalk

Photoshoot: Pictures were taken by my wife. Sent from my iPhone using Tapatalk

Trooping Log 4. Mirandah Gala Dinner 27th August 2016 5. Malaysia 59th Independence Day. Organized by Selangor State Government. https://m.facebook.com/story.php?story_fbid=1268583806509328&id=373441049356946 Sent from my iPhone using Tapatalk

Belt: Modified the belt construction. Remove the old fabric Anovos completely. Carefully cut around the metal. Glue velcro hook with E6000 to the belt. Stitch the soft velcro part to the new cloth part. Combine both. Sent from my iPhone using Tapatalk

Here is my sponge padding. Less is more. Sent from my iPhone using Tapatalk

Requesting 501st access http://www.501st.com/members/displaymemberdetails.php?userID=22210 TK18004 Sent from my iPhone using Tapatalk

Received my 501st approval today. TK 18004 reporting for duty sir.

21/8/2016: 3rd official trooping. Event name: CAFFA 2016. Location: Publika Mall Kuala Lumpur (Indoor) Post trooping notes: 1) I need to apply more hot water bath to the butt plate. Still not conform to my butt shape. 2) Adjust thigh armor. Currently felt like it is too big and reduce my mobility during walks.(Done) 3) Found crack on kidney and butt plate armor. To reinforce the area. 4) To reduce the length of the shin armor. Now it is rubbing with my boots.(Done) 5) To reduce the return edge on the abs plate.(Done) 6) I start to wear balaclavas during this troop. I can feel the advantage of having more air flow inside the bucket. (Info)

Good luck in your built. Looking forward for it. Sent from my iPhone using Tapatalk

Submit my 501st Member Application. Wish me luck. Sent from my iPhone using Tapatalk