Chivo

Congrats Pete

Nice work guys

I can see it !

Nice work Bud

What type of drivers are you using, do you have a picture of them, there is nothing wrong in the code as I have made 7 of these so far.

The RGB will come on and stay on at bootup for about 3 seconds then go off, you must have something wrong with the wiring Steve. there are some drivers out their that have the same part numbers but are the opposite side for the wiring, that I had to find out.

Hi Sly11 If you get stuck I can help you a little, have done about 7 of these and still have a few parts left over if you get stuck. Not sure if you had seen ours at DW15 From the Desert Scorpion Squad. Cheers Michael

------------- available on ebay.

This is the Vacuum former I'm using.

I have used plaster in one mold but it starts to crumble if you have to blow air in to release it plus the force pulling down when you vacuum will can crack it. I also use bondo on most of mine but you have to keep patching them up as it doesnt like the heat on it to many times. MDF is good as its porous and release's easy. If you can get one good pull, then use that and pour hydrostone in it for a longer lasting mold.

Thought I would put this out there for other options ! http://www.hobbyking.com/hobbyking/store/__48658___Pre_order_Beta_Project_Sterling_AEG.html

Thank you Skyone !!!! Have it all working great

I like the play random TK voice's, Nice work I seem to get this error with the code ? e11_ver_04_02L_WT5001.ino:306:33: error: invalid suffix "cvf00" on integer constant

I'm using the same sound module and it works great with your setup !!

Nice work there haui !! Is it possible to add that code to Skyone's so we stay on track with his code ?

Thanks skyone for all your effort in this project,I have made this up with the WT5001M02-28p sound module and its working great !! I ended up using less sounds as it takes to long to cycle back to the beginning for the E-11 blaster sound, would be good if you added some code so you could hold the selector button down for a few seconds to start back at the beginning. Awesome stuff !!!

Nice pictures and some good tips on the helmet ears

Thanks for that Skyone. Will give this one a try as my somo14d module is not very good, don't like the clicks and if I add the 3watt mini amp it's worse.

Thanks Looking forward to your feedback.....

Skyone have you tested the WT5001 sound module, need some feed back before I buy! Thanks. Michael

Yes mine does the same thing, then I seen that the red led was locked on so no mic only static burst when ptt have only used this twice, the only way was to switch off then back on? very anoying Ps: thats with the ballon over the switch to keep moisture out.

Congrats Glen on Centurion

No you need more alcohol

I think you might need a few more pictures.......no return edge on the forearms