WRU2000[TK] Posted January 26 Report Posted January 26 Mandatory Information * Armor = Troopermaster* Helmet = Troopermaster* Blaster = Shear Tech Rubber E-11* Link to my approved armour = https://www.501st.com/members/searchresults.php?searchfield=14062&criteria=tkid* Social media consent = Yes Optional * Height = 6’ 2”* Weight = 210 pounds * Boots = Imperial Warfighters* Canvas belt = Troopermaster* Hand Plates = Shear Tech Rubber* Neck Seal = The Imperial Seamstress* Holster = Troopermaster To the Deployment Officer team, My name is Daniel Baker of the Imperial Welsh Squad (UK Garrison). My TK was cleared on December 17th, 2025, and I am now seeking to elevate my build to Expert Infantry level. I have carefully studied the CRL requirements, and I believe the following photos demonstrate that my armor meets Expert Infantry criteria. As discussed with my UK Garrison Armourer, I thought I would give you some context regarding the fit of my bicep armour: I have measured my biceps at approximately 15.5 inches. I have been weight training consistently for around 10 years, which may explain why my bicep armor appears fuller compared to other troopers you have reviewed.I have quite high bicep and tricep muscle bellies/insertions. Therefore, it may look like there is a little room at the bottom of the bicep armor. However, the middle and upper portion are very much full. I am unable to fit even a finger in that area. My UKG Armourer has said he has seen this before with other larger troopers. Therefore, it should not pose an issue going forward. At 6’ 2” and 210 pounds, I may not have the most typical build that you see from people putting in for Expert Infantry status. However, I am determined not to let that stop me from reaching my goal. Below I’ve included a link to my Dropbox folder below with additional photos. These should help with my Centurion application, provided my Expert Infantry status is approved first. Would you mind taking a look at those as well? https://www.dropbox.com/scl/fo/8ytfj8m2lb5cr2ghi2ynh/AG7K7rNh4CJ5R0dhah4ikGc?rlkey=vac9fvkz4xzkszynhjeiyb74i&st=6rvv51tp&dl=0 Sent from my iPhone using Tapatalk Quote
WRU2000[TK] Posted January 26 Author Report Posted January 26 Sent from my iPhone using Tapatalk 1 Quote
WRU2000[TK] Posted January 26 Author Report Posted January 26 Sent from my iPhone using Tapatalk Quote
WRU2000[TK] Posted January 26 Author Report Posted January 26 Sent from my iPhone using Tapatalk 1 Quote
WRU2000[TK] Posted January 26 Author Report Posted January 26 Sent from my iPhone using Tapatalk 1 Quote
WRU2000[TK] Posted January 26 Author Report Posted January 26 Thank you for your time and for everything you do for the Legion. I very much look forward to hearing your feedback. Lastly, have a fantastic day! For the Empire!Daniel BakerTK-14062Imperial Welsh SquadSent from my iPhone using Tapatalk 2 Quote
TKSpartan[Staff] Posted January 26 Report Posted January 26 Hi daniel Thank you for your EIB Submission. One of us will be with you as soon as possible. Added to the line. 1 Quote
Chemi[Staff] Posted January 28 Report Posted January 28 Hello Daniel. While we work on your review, we need to ask you for a small fix. We need you to paint a little white on the outer rim of the "aerators".A very easy fix. L2-Correct Aerators/Hovi-MIX tips are present. Screens used shall be of a wide type mesh, with the rim of the mic and the inside white or painted white. Reference Images Thanks Daniel. Quote
WRU2000[TK] Posted January 28 Author Report Posted January 28 Hello Daniel. While we work on your review, we need to ask you for a small fix. We need you to paint a little white on the outer rim of the "aerators".A very easy fix. L2-Correct Aerators/Hovi-MIX tips are present. Screens used shall be of a wide type mesh, with the rim of the mic and the inside white or painted white. Reference Images Thanks Daniel. Hey Chemi, Fantastic to hear from you! I’ll get those outer rims painted shortly for you, and will post up an image once completed. Also, I am unable to see the four images you have posted. It says “content not viewable on your region”. Please see my image for reference: Perhaps it is because I am in the UK? Is there anything I can do to prevent this? I want to make sure I don’t miss any of your feedback. Thanks in advance, Chemi. Sent from my iPhone using Tapatalk 1 Quote
Chemi[Staff] Posted January 28 Report Posted January 28 Yes, Imgur is blocking users in the UK We need to find a solution for this...We will keep you updated. Thanks Daniel... Quote
WRU2000[TK] Posted January 29 Author Report Posted January 29 Yes, Imgur is blocking users in the UK:angry: We need to find a solution for this...We will keep you updated. Thanks Daniel...Hey Chemi! Outer rim has been completed. Let me know if this is up to standard, and if there is anything else for me to complete. Thank you in advance for your reply. Sent from my iPhone using Tapatalk 1 Quote
Chemi[Staff] Posted January 29 Report Posted January 29 hace 6 horas, WRU2000 dijo: Hey Chemi! Outer rim has been completed. Let me know if this is up to standard, and if there is anything else for me to complete. Thank you in advance for your reply. Perfect. Well done! 1 Quote
Chemi[Staff] Posted February 3 Report Posted February 3 Hi Daniel, and thank you for your EIB application! First of all, thank you for your patience. You don't have to worry about the size of your biceps. I'm also a “big biceps” Trooper. Everyone's body is different, and we adapt to everyone... CRL and EIB Application Requirements: All required photos have been submitted, and on behalf of the entire D.O. staff we are pleased to welcome you to the rank of Expert Infantry. Congratulations! Other-Armor Fit/Assembly; In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armor, and please keep in mind that we consider both text (CRL) and pictures (screen caps/reference images) when reviewing submissions. Starting with the helmet, it seems to be a little high... To be honest, it's not much, but if you can lower it a little, it will look much better from the front, and from the back it will cover the wrinkles in the neck seal. Reference Image The ear screws should be aligned with the rear edge of the traps. We always mention this as a “suggestion,” as it is somewhat difficult to correct. Furthermore, in your case, one side is perfect, and the other is almost perfect... It would only be necessary to cut it if the helmet looked “ugly,” which is not the case here. Reference Images It seems that some paint is missing from the boots due to friction caused by the armor. Although in some photos it looks like this has been fixed, we'll mention it here so that you can give them a coat of paint every now and then to keep them looking “very smart” in the troops. About the Blaster, It looks like the scope rail is bent; it doesn't appear to have the step at the front. Maybe it's just "a little inside" the body of the blaster, and you can easily fix it. Reference Image Reference Image Centurion Requirements: In this section we prepare you for our highest tier of approval. Because Centurion photos must show more detail than EIB, items pertaining to Level 3 might be seen there and not here and additional photos may be required. We try to point out all that we can from what we are able to clearly see, but the final accuracy is the responsibility of the trooper. Well, there's not much to mention here. Without a doubt, your armor is a work of art. Although we know it will be there, we need a photo of the S-shaped joint of the helmet. It's not much, but we need the belt to go up a little. You can use a little Velcro (for example) to keep the belt from moving. L3.-The top of the ABS ammo belt should sit at or just above the bottom of the central and vertical abdomen button panels. Reference Images As for the blaster, there seems to be some weathering on the grip and T-tracks. With a little black paint, it's fixed... Very easy fix... L3.- The blaster may have minor weathering or base metal exposure however, T-tracks and grips shall be of a black plastic appearance with no silver/metallic weathering allowed. Reference Images And that's it, Daniel. Congratulations. We look forward to seeing your Centurion application soon. Don't forget to request your EIB certificate! 1 Quote
gmrhodes13[Staff] Posted February 3 Report Posted February 3 Congratulations trooper and welcome to the Expert Infantry and the EI Honor Gallery 3 Quote
WRU2000[TK] Posted February 4 Author Report Posted February 4 Hey DO Team,First of all, thank you very much for the approval! I am immensely proud to earn the Expert Infantry badge and will wear it with pride.Secondly, thank you to each and every one of you for the time you spend reviewing my application and the many others in the queue. You are rockstars; the Legion and I are extremely grateful for your dedication and the work you do to maintain our standards.Lastly, I will be attending an armor party this Sunday to address the feedback you provided. I’ll be taking fresh photos and submitting for Centurion shortly after.Speak soon!Sent from my iPhone using Tapatalk 1 2 Quote
WRU2000[TK] Posted February 9 Author Report Posted February 9 Congratulations Trooper!!1 Thank you! Sent from my iPhone using Tapatalk Quote
WRU2000[TK] Posted February 9 Author Report Posted February 9 Congratulations to EIB!Thank you! Sent from my iPhone using Tapatalk Quote
WRU2000[TK] Posted February 9 Author Report Posted February 9 Congratulations trooper and welcome to the Expert Infantry and the EI Honor Gallery Looks awesome! Thank you! Sent from my iPhone using Tapatalk Quote
Spadille[TK] Posted February 9 Report Posted February 9 Congratulations Trooper, welcome to the ranks! 1 Quote
WRU2000[TK] Posted February 9 Author Report Posted February 9 Congratulations Trooper, welcome to the ranks! Thanks, Rachel! I’ve been using your thread as a guideline for my centurion application actually! Hopefully, all goes well! Sent from my iPhone using Tapatalk 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.