Jump to content

Recommended Posts

Posted

Hi Troopers,

 

I recently picked up an old barely started Anovos kit from a garrison member and looking to convert it to an ESB TK and looking to take it to Centurion.

 

With the thighs, they’re a bit long for my legs. Obviously I’ll need to trim them from the top down removing the top return edge and about 1/2 to 1 inch. 
 

Nothing in the CRL says you can’t, but would this affect Centurion level ? 

IMG_7624.jpeg

Posted
2 hours ago, ARC said:

Hi Troopers,

 

I recently picked up an old barely started Anovos kit from a garrison member and looking to convert it to an ESB TK and looking to take it to Centurion.

 

With the thighs, they’re a bit long for my legs. Obviously I’ll need to trim them from the top down removing the top return edge and about 1/2 to 1 inch. 
 

Nothing in the CRL says you can’t, but would this affect Centurion level ? 

IMG_7624.jpeg

You don't need to have any return edge for any level.

Great thread on return edges here: 

 

 

 

 

 

  • Like 2
Posted
1 hour ago, gmrhodes13 said:

You don't need to have any return edge for any level.

Great thread on return edges here: 

 

 

Thanks for that, it’s good read.

Tomorrows job is more trimming 😎

  • Like 1
Posted

Andrew,

First, SUPER stoked to know that you are aiming for Centurion!  :salute:  We are gonna' get you there, brother....

 

You can trim the tops down as much as you like to make them fit correctly, and as long as you follow the general line of the shape of the top you will be fine for all levels. 

 

It looks as if you have put the green tape to hold them in place get the approximate size to fit the top of your thighs, but be aware that once you remove those return edges they will be way too loose.

 

Once you get rid of those pesky return edges ;), you should trim down the sides as shown below to keep the sides at more of a a vertical angle.  A general rule of thumb is that you should be able to fit 4 fingers (or so) in between your thigh pieces and legs.  Any less and they can chafe, any more and they may hold you back from Level 3.

 

image.thumb.jpeg.f4319bae246abcae8089f9253805593e.jpeg

 

Keep those photos and questions rolling in, Andrew!

  • Like 2
Posted
On 11/20/2025 at 8:44 AM, justjoseph63 said:

Andrew,

First, SUPER stoked to know that you are aiming for Centurion!  :salute:  We are gonna' get you there, brother....

 

You can trim the tops down as much as you like to make them fit correctly, and as long as you follow the general line of the shape of the top you will be fine for all levels. 

 

It looks as if you have put the green tape to hold them in place get the approximate size to fit the top of your thighs, but be aware that once you remove those return edges they will be way too loose.

 

Once you get rid of those pesky return edges ;), you should trim down the sides as shown below to keep the sides at more of a a vertical angle.  A general rule of thumb is that you should be able to fit 4 fingers (or so) in between your thigh pieces and legs.  Any less and they can chafe, any more and they may hold you back from Level 3.

 

image.thumb.jpeg.f4319bae246abcae8089f9253805593e.jpeg

 

Keep those photos and questions rolling in, Andrew!


thanks for the feedback, the image helps a lot. I think I’ll do a build thread while I’m still in the early stages. 

  • Like 1
Posted

And in the event they took too big or have a big gap between them and your legs you can add a return edge.

 

 

 

 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...