ARC982106 Posted July 15, 2023 Report Share Posted July 15, 2023 I need to take the helmet apart so I can have better accessibility, I'm not sure if these are buttons or rivets that cannot be removed, does anyone have experience with taking the helmet apart? Quote Link to comment Share on other sites More sharing options...
TheRascalKing[TK] Posted July 15, 2023 Report Share Posted July 15, 2023 Those are pop rivets. Hold that part with pliers (not the washer) and drill them out from the other side, or sometimes you can clip the bulb at the end there off with side cutters. Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted July 15, 2023 Report Share Posted July 15, 2023 Don't rush, heat can build up if you drill too fast, nice and slow and make sure not to loose your grip on the rivet as spinning can also cause heat. 1 Quote Link to comment Share on other sites More sharing options...
FN1313[TK] Posted July 17, 2023 Report Share Posted July 17, 2023 If you have some strong wire cutters that can fit in that area you could also potentially snip them instead of drilling, it all depends on the area you have to work with and if the tool is strong enough.Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.