Mic tips

[TheMagicNumber]

Hi, 

I'm starting an ANH stunt build, helmet first.

I have some mic tips - interior is white, exterior black, wide hole mesh fitted flush(ish) with the front.

 

Not sure if I needed to paint the front thin leading edge - the 'tops' if you like that surround the mesh - as I hear that needs to white, it's currently black.

 

Can anyone advise if these will pass level 2 as that's what I'm going for and if the edges need to be white.

 

 

TIA 

[gmrhodes13[Staff]]

From the CRL: with the rim of the mic and the inside white or painted white.

 

Yes I would paint the front rim. Here are a couple of references.

 

[TheMagicNumber]

Thanks .

 

While I'm here...I'm really struggling to find the line 24 snaps in the uk - looking at thirty pounds for a set of four which seems pretty extreme does anyone have a uk source/link for these.

 

Thanks

[LightBox]

Just a small tip I learned; A simple way to make the rim of the mic tip white (instead of masking and painting it) is to sand down the rim with sandpaper, revealing the white underneath.  That is, if you are using white resin-cast mic tips. Best of luck on your build.