TheMagicNumber Posted July 4, 2020 Report Share Posted July 4, 2020 Hi, I'm starting an ANH stunt build, helmet first. I have some mic tips - interior is white, exterior black, wide hole mesh fitted flush(ish) with the front. Not sure if I needed to paint the front thin leading edge - the 'tops' if you like that surround the mesh - as I hear that needs to white, it's currently black. Can anyone advise if these will pass level 2 as that's what I'm going for and if the edges need to be white. TIA Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted July 4, 2020 Report Share Posted July 4, 2020 From the CRL: with the rim of the mic and the inside white or painted white. Yes I would paint the front rim. Here are a couple of references. 1 Quote Link to comment Share on other sites More sharing options...
TheMagicNumber Posted July 5, 2020 Author Report Share Posted July 5, 2020 Thanks . While I'm here...I'm really struggling to find the line 24 snaps in the uk - looking at thirty pounds for a set of four which seems pretty extreme does anyone have a uk source/link for these. Thanks Quote Link to comment Share on other sites More sharing options...
LightBox Posted July 5, 2020 Report Share Posted July 5, 2020 Just a small tip I learned; A simple way to make the rim of the mic tip white (instead of masking and painting it) is to sand down the rim with sandpaper, revealing the white underneath. That is, if you are using white resin-cast mic tips. Best of luck on your build. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.