xnizamx[TK] Posted June 6, 2018 Report Posted June 6, 2018 Name: Nizam NainHeight: 173cmWeight: 102kgFISD Name: xnizamxLegion ID#: 32158Profile Page: https://www.501st.com/members/displaymemberdetails.php?userID=26089Garrison: Singapore Garrisson Build InformationArmor Maker: RS PROP MASTERS COMMISSIONED Helmet Maker: RS PROP MASTERS COMMISSIONEDBoots: RS PROP MASTERS COMMISSIONEDGloves: RS PROP MASTERS COMMISSIONEDNeck Seal: RS PROP MASTERS COMMISSIONEDE11 blaster: DOOPY DOOS Sent from my SM-G965F using Tapatalk Quote
justjoseph63[Staff] Posted June 6, 2018 Report Posted June 6, 2018 Hi Nizam, and thanks for your EI submission! I will be basing the review on the photos of you wearing your bucket, but before proceeding I will need you to post the following photos please. Thanks! 1. Backlit lenses showing green color. 2. Right side detail. (Arms up with a close-up of ab/kidney connection). 3. Left side detail. (Arms up with a close-up of ab/kidney connection). 4. Bottom of cod and posterior plates showing snaps/rivet. 5. Interior strapping. 6. Ab details. 7. Blaster photo (right side). 8. Blaster photo (left side). 9. Close up photo showing D-ring. 10. Type (maker) of the blaster. Lastly, I am assuming this is for ANH Stunt. Please let me know and I will change the title of the thread for you. Quote
xnizamx[TK] Posted July 2, 2018 Author Report Posted July 2, 2018 Hi Joseph. Thanks for your reply. And apologies for the delayed response. I've been engaged this last few weeks. Will submit all the required photos hopefully by this weekend. Sent from my SM-G965F using Tapatalk Quote
justjoseph63[Staff] Posted July 2, 2018 Report Posted July 2, 2018 7 hours ago, xnizamx said: Hi Joseph. Thanks for your reply. And apologies for the delayed response. I've been engaged this last few weeks. Will submit all the required photos hopefully by this weekend. Sent from my SM-G965F using Tapatalk Sounds great, Nizam, and I look forward to seeing them! Quote
justjoseph63[Staff] Posted July 8, 2018 Report Posted July 8, 2018 Hi again, Nizam, and thank you for posting the additional photos! Before I get started on your submission, there are a few issues I am sure you can get taken care of so we can get you approved at EI! : 1. Nice job on sizing those a/kidney shims, but as per the CRL the seam will need to be flush (flat), not overlapped as it currently is. A seam is allowed at level 2, Shims fit flush and seams are allowed but they will need to be covered for level 3. This should be a fairly easy fix by removing the shims and butting the edge up flat against the kidney and then adding a cover strip behind it for reinforcement. You can also add some ABS paste to cover the seam, but it will need to be sanded down smooth if you choose to do that.. Here is a tutorial on ABS paste if you need one: https://www.whitearmor.net/forum/topic/42866-how-to-make-abs-paste/ 2. Can you post up a few more detailed photos for me? Here is a list, along with some examples" a). TD screws- The ones on the top appear to be the required flat "pan" head, but the ones on the bottom look like round head. (It may be the camera angle, though): As per the CRL: Clips shall be attached with slotted, pan head style screws, and be black (two per clip) Reference image Yours b). Ab details- (Example) c). Interior Strapping- (Example) d). Bottom of cod/posterior plate showing snaps/rivet. (Example) e). Blaster- Looks like you did a spectacular job on that E-11, brother, so why not show it off! We will need left/right photos as shown below for level 2: (Example) (Example) Also, please list the baster type in your main post. Thanks again for your EI submission, and I have every confidence that you will do a great job on those shims, Nizan. Once they are done and the photos are posted we can move you along, Trooper 1 Quote
illusionz_09[TK] Posted July 13, 2018 Report Posted July 13, 2018 Seems like the details for your submission have been mentioned. Good luck on those updates. Quote
xnizamx[TK] Posted August 25, 2018 Author Report Posted August 25, 2018 Thank u guys for the comments. Been a little busy this month. Will work on those mentioned soon. Sent from my SM-G965F using Tapatalk Quote
xnizamx[TK] Posted August 25, 2018 Author Report Posted August 25, 2018 And sorry for the late replies. I somehow did not get any notifications on new messages. Sent from my SM-G965F using Tapatalk Quote
xnizamx[TK] Posted September 4, 2018 Author Report Posted September 4, 2018 Hi. Attached are the detailed photos.1. Just wanna confirm that the TD screw are wrong. 2. The strapping should be correct.3. The cod piece male snaps are there.4. The abdomen armour buttons are correct.5. The shims will need to redo to make it flush.6. Just received the doopydoos blaster. Will work on this right away. The previous one was a mod disney. Anything else amiss? Thanks guys.Sent from my SM-G965F using Tapatalk Quote
ukswrath[Staff] Posted September 5, 2018 Report Posted September 5, 2018 Hey Nizam almost there brother. Please post a photo of the blaster "D" ring please. Also, you'll need to remove the paint from the cod male snaps before we can proceed. Thanks Reference photo Quote
xnizamx[TK] Posted September 6, 2018 Author Report Posted September 6, 2018 A photo of the bucket attached. Green lenses. Sent from my SM-G965F using Tapatalk Quote
justjoseph63[Staff] Posted September 6, 2018 Report Posted September 6, 2018 On 9/4/2018 at 1:35 AM, xnizamx said: 1. Just wanna confirm that the TD screw are wrong. Yes sir, brother. They need to be the "pan head" (flat) as seen in the pics below. Also, as Tony mentioned you are SOOOOOO CLOSE! Please submit the pics of the corrected screws and the ones Tony requested and you will be in good shape! Pan head screws Reference image Quote
justjoseph63[Staff] Posted September 26, 2018 Report Posted September 26, 2018 Any updates on this, Nizam? Quote
xnizamx[TK] Posted October 1, 2018 Author Report Posted October 1, 2018 Any updates on this, Nizam?Apologies. I just came back from overseas. Will get to work on the issues over the next 2 weekends thanks for checking up. Sent from my SM-G965F using Tapatalk 1 Quote
justjoseph63[Staff] Posted October 2, 2018 Report Posted October 2, 2018 Sounds good! Keep us posted, sir. Quote
xnizamx[TK] Posted November 18, 2018 Author Report Posted November 18, 2018 Hi guys. Sorry. Have been busy with work. Attached are the requested change for:1. Flat head screws for TD2. Removal of paint for the code piece snaps3. Picture of blaster (Doopy Doos) and D-ringThe remaining 1 issues are:1. Shims for kidney plate to be flush and seamless (WIP)Sent from my SM-G965F using Tapatalk 1 Quote
xnizamx[TK] Posted November 18, 2018 Author Report Posted November 18, 2018 Kidney plate shims (WIP).Is it a requirement to fill the gaps with abs paste n sand till seamless? Or can this pass for EIB? Thanks.Sent from my SM-G965F using Tapatalk Quote
ukswrath[Staff] Posted November 18, 2018 Report Posted November 18, 2018 5 hours ago, xnizamx said: Kidney plate shims (WIP). Is it a requirement to fill the gaps with abs paste n sand till seamless? Or can this pass for EIB? Thanks. OPTIONAL Level two certification (if applicable): ..... Any shims used to achieve this effect are of a similar material and color as the abdomen and kidney armor. Shims fit flush and seams are allowed. OPTIONAL Level three certification (if applicable): .... A single visible seam line is present. Quote
xnizamx[TK] Posted November 18, 2018 Author Report Posted November 18, 2018 OPTIONAL Level two certification (if applicable): ..... Any shims used to achieve this effect are of a similar material and color as the abdomen and kidney armor. Shims fit flush and seams are allowed. OPTIONAL Level three certification (if applicable): .... A single visible seam line is present.Thanks Sent from my SM-G965F using Tapatalk Quote
xnizamx[TK] Posted November 19, 2018 Author Report Posted November 19, 2018 The shims are done. Flush and no overlapping. All recommended changes have been fixed. Sent from my SM-G965F using Tapatalk Quote
justjoseph63[Staff] Posted November 19, 2018 Report Posted November 19, 2018 Looking sharp, brother... thanks for the updates and SUPER nice job on those shims!! I just need one more photo (I promise) and then I can get started. Can you add some white paint to those rivets for me? No need to get suited up, of course. Almost there!! Quote
xnizamx[TK] Posted November 20, 2018 Author Report Posted November 20, 2018 Looking sharp, brother... thanks for the updates and SUPER nice job on those shims!! I just need one more photo (I promise) and then I can get started. Can you add some white paint to those rivets for me? No need to get suited up, of course. Almost there!! Lol...on it. Will get it painted once I get home from work. Sent from my SM-G965F using Tapatalk 1 Quote
illusionz_09[TK] Posted November 20, 2018 Report Posted November 20, 2018 almost there... push push push!!! good luck... 1 Quote
xnizamx[TK] Posted November 20, 2018 Author Report Posted November 20, 2018 Rivets painted white as required Sent from my SM-G965F using Tapatalk Quote
xnizamx[TK] Posted November 20, 2018 Author Report Posted November 20, 2018 almost there... push push push!!! good luck...Thanks brother Sent from my SM-G965F using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.