acetilacetato[TK] Posted May 26, 2016 Report Share Posted May 26, 2016 Basic InformationName = Oscar Arellano501st ID = 28272FISD forum name = acetilacetatoUnit Garrison = Spanish GarrisonEIB status: http://www.whitearmor.net/forum/topic/33173-tk-28272-requesting-anh-stunt-eib-status-sds502/Mandatory InformationArmor Maker = SDS battle specHelmet Maker = SDS battle specBlaster Type = Doppydoos kit (with some modifications based on FISD Manual E-11 BLASTER REFERENCE)OptionalHeight = 170 cmWeight = 101 KgBoots Maker = CK boots typeGlobes = Rubber chemical typeCanvas belt = MyselfHand Plates = Made TK-60571 (0skar)Electronics = noNeck Seal Type = MyselfHolster Maker = MyselfFull BodyFrontBackLeftRightArmor DetailsAction ShotRight Side DetailLeft Side DetailAbdomen DetailsCod and Butt Plate AttachmentHand PlatesShoulder Bridge BackThigh Pack AttachmentKnee PlateDrop Box BackInterior StrappingHelmet DetailsFrontSideBackHovi Mic Tip DetailLens ColorS--TrimBlaster DetailsBlaster – RightBlaster – LeftD-ringAccessories DetailsNeck SealThermal Detonator – BackHolster Attachment Regards 2 Quote Link to comment Share on other sites More sharing options...
Yiyo[501st] Posted May 26, 2016 Report Share Posted May 26, 2016 Absolutely amazing work Oscar! I hope you achieve your target! Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
0skar[TK] Posted May 31, 2016 Report Share Posted May 31, 2016 Great, great work mate. You should have no problems to get the level. 1 Quote Link to comment Share on other sites More sharing options...
SG JIG[TK] Posted June 2, 2016 Report Share Posted June 2, 2016 Good job dude. You are going to make it for sure. Best of lucks! 1 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted June 2, 2016 Report Share Posted June 2, 2016 Hey Oscar, sorry for the delay, Sly or myself will be with your shortly Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted June 2, 2016 Report Share Posted June 2, 2016 Hey Oscar can we get pictures of the following areas please Shoulder bridge connection, interior and exterior front and back Wrist side of forearms Thank you Quote Link to comment Share on other sites More sharing options...
Strength Posted June 2, 2016 Report Share Posted June 2, 2016 Looks great. Thanks for this, it gives me a visual to see while i start my first armor build. Sent from my SM-N920T using Tapatalk Quote Link to comment Share on other sites More sharing options...
acetilacetato[TK] Posted June 3, 2016 Author Report Share Posted June 3, 2016 Hi, I send the pictures requested. Wrist side of forearms Shoulder bridge connection, interior and exterior front and back Regards 1 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted June 3, 2016 Report Share Posted June 3, 2016 Thank you Quote Link to comment Share on other sites More sharing options...
anderche[TK] Posted June 3, 2016 Report Share Posted June 3, 2016 The great work you've done oscar, has been great you :smiley-sw013: :smiley-sw013: 1 Quote Link to comment Share on other sites More sharing options...
jariche[501st] Posted June 6, 2016 Report Share Posted June 6, 2016 Good job ...... Congratulations Oscar 1 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted June 8, 2016 Report Share Posted June 8, 2016 Hey Oscar, thank you for your patience and Centurion application. Let's get started. CRL and Centurion Application Requirements: All submission photos are present. There are a couple areas you will need to update before we can move forward. 1) Forearm return edge. According to the CRL there is to be no return edge on the forearm near the wrist. Please remove and post a new picture showing the updates. Thanks brother For level three certification (if applicable): No return edge on the inside of the front of the forearm is allowed. Reference photo 2) Multiple seams at kidney. The CRL states you can have only one visible seam. Adding a bit more ABS paste and some paint should remedy this. Something else we notice but a will not require you to fix unless you want to , the lower edge of the shim should meet up with the lower edge of the kidney. Since your belt hides this it's easily hidden from view. For level three certification (if applicable): Ideally there no gap between the abdomen and kidney armor.A single visible seam line is present. 3) Drop box alignment. We're not requiring you to repair this for approval but it is highly suggested you secure the connecting strap to the waist belt so that they remain in position. It is required they remain in position. For level three certification (if applicable): Drop boxes are vertically aligned with the end of the ammo belt with minimal gap between belt and box.In your action shot they're spot on but by itself they appear to be off. Alright, just a few areas to take care of and the Centurion badge is yours. You can do it Oscar 2 Quote Link to comment Share on other sites More sharing options...
acetilacetato[TK] Posted June 15, 2016 Author Report Share Posted June 15, 2016 Hi, I send the pictures according to the instructions. Forearm return edge Multiple seams at kidney Drop box alignment Regards 2 Quote Link to comment Share on other sites More sharing options...
Yiyo[501st] Posted June 16, 2016 Report Share Posted June 16, 2016 Great work Oscar, looking forward to your Centurion Status my friend! Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted June 16, 2016 Report Share Posted June 16, 2016 Thanks Oscar well be with you shortly Sent from my SAMSUNG-SM-G935A using Tapatalk Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted June 20, 2016 Report Share Posted June 20, 2016 Hey Oscar, alright brother let's do this. Thank you for making the requested repairs. CRL and Centurion Application Requirements: All submission photos are present. Your armor displays all the necessary elements to qualify for Centurion. Sly and myself would like to congratulate and welcome you to the rank trooper. 1 Quote Link to comment Share on other sites More sharing options...
Yiyo[501st] Posted June 20, 2016 Report Share Posted June 20, 2016 Oscar, congrats on a job well done and thanks for inspiring us bigger troops in knowing that we can also reach Centurion level!! Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
acetilacetato[TK] Posted June 21, 2016 Author Report Share Posted June 21, 2016 Thank you all.I want to give a big hug to my brothers Spanish centurions with SDS armor, of which I have learned and received from their knowledge and assistance (Oskar, Anderche, Jariche ....) and our attache, Mr. Faie. Strength and victory!!!! 2 Quote Link to comment Share on other sites More sharing options...
Captain_Wordo[TK] Posted June 21, 2016 Report Share Posted June 21, 2016 Congrats Oscar and welcome to the centurion rank! 1 Quote Link to comment Share on other sites More sharing options...
jonhaag[501st] Posted June 21, 2016 Report Share Posted June 21, 2016 Big congrats! As a fellow bigger guy, your application photos served as an excellent reference as I've been putting the finishing touches on my kit. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.