SStormtrooper[TK] Posted February 15, 2016 Report Share Posted February 15, 2016 (edited) Name: Mario de la Peña501st ID: 55839FISD forum name: SStormtrooperGarrison: Spanish Garrison 501st Legion Member link: http://www.501st.com/members/displaymemberdetails.php?userID=20220 Mandatory InformationArmor Maker: SDS battle specHelmet Maker: SDS battle specBlaster Type: ash BH - 17116 OptionalHeight: 176 cmWeight: 61 KgBoots Maker: Painted type decathlon bootsGlobes: Rubber chemicalCanvas belt: Sully TK- 71280Electronics: noNeck Seal Type: My motherHolster Maker: Antillis TC - 3716 FULL BODY Front Left Right Back Abdomen detail Action Shot Interior Strapping Cod and Butt Plate Attachment Belt Thermal Detonator Neckseal Helmet Front Left Right Back Hovi tip detail Lens color Blaster Quiero dar las gracias a todos los que me han ayudado y que hoy en día me siguen ayudando a mejorar, en especial a mi grupo whatsap SDS Edited February 16, 2016 by SStormtrooper Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted February 16, 2016 Report Share Posted February 16, 2016 Hi Mario thank you for your EIB application. Can you do us a huge favor post pics so that they appear here on the thread, something like this. Let us know if you need assistance in this area. Thank you Quote Link to comment Share on other sites More sharing options...
SStormtrooper[TK] Posted February 16, 2016 Author Report Share Posted February 16, 2016 it is fixed : Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted February 17, 2016 Report Share Posted February 17, 2016 Excellent thank you Quote Link to comment Share on other sites More sharing options...
Sly11[Admin] Posted February 22, 2016 Report Share Posted February 22, 2016 Hey Mario, thank you for your application for Expert Infantry, lets check it out!! CRL and EIB Application Requirements: Only missing a photo of the end of your blaster showing the D ring, but this is clearly present in the other photos supplied. There is however, one thing standing out that managed to slip through your basic approval. Your boots! These are required to have flat soles and not the thick tread soles that you have in you application photos. As written in the CRL for Basic 501st Approval. .Boots Flat sole with short heel. We will require these changed to an appropriate boot so we can proceed with your approval. Image of original screen used boot. Another members, hand painted boots with flat sole. TK Boots are also available when in stock. If you have any questions, please don't hesitate to send Ukswrath or myself a PM, we are here to help. Thanks Mario, hope to see an update to your application soon. Quote Link to comment Share on other sites More sharing options...
SStormtrooper[TK] Posted February 23, 2016 Author Report Share Posted February 23, 2016 Updated boots Quote Link to comment Share on other sites More sharing options...
Sly11[Admin] Posted February 25, 2016 Report Share Posted February 25, 2016 Hi Mario Thank you for updating your boots. Could we please ask that you post up replacement photos with you wearing the boots, to replace your Action photo, and the other photos that we can see the old boots in. Thank you Quote Link to comment Share on other sites More sharing options...
SStormtrooper[TK] Posted February 26, 2016 Author Report Share Posted February 26, 2016 ;)There has Mr Quote Link to comment Share on other sites More sharing options...
Sly11[Admin] Posted February 27, 2016 Report Share Posted February 27, 2016 OK Mario, welcome back to your EI review. Your armor represents all necessary elements to qualify for EIB. With that we would like to congratulate you on your new "Expert Infantryman" status!!, well done Mario Other-Armor Fit/Assembly: In this section we usually review observations made by your fellow troopers but as yet no one has come forward with any, so we shall discuss some of our observations. These are suggestions to improve the overall look of your armor. If any suggestion would affects a future Centurion application, it will be listed separately in the below section. You have a good clean build here, and to be honest, some minor trimming and a few adjustments, and you will look spectacular. Looks like you have a slight problem with your shins twisting and rotating. To keep this in check, maybe add some industrial Velcro to the inside front of the shin and to the front upper of the boot. Alternatively some foam in a couple of key locations towards the top of the shin can also prevent the movement. This miss alignment of your Ab and kidney plate is possibly only caused by you raising your arms, but something to keep in check all the same. The two halves should sit level along the top edge. Teeth should be painted to the gum line, and slightly extended on the ends Centurion Suggestions: Kidney to ab overlap: On the right hand side you have quite an overlap, which we would highly recommend you trim down so the two halves meet, and butt up against each other. This will most probably need to have an amount trimmed off each side of the kidney plate to keep it balanced. This means removing the 3 rivets on the kidney piece and re positioning them once you have trimmed back an even amount on either side. Calf cover strips: This is a little hard to tell as it may be just a bad angle or lighting in the photo, but your calf cover strip looks to extend all the way to the top. This needs to be trimmed off so it finishes at the base of the ridge. For your future Centurion application, continue to follow the CRL as you have been, and make sure to post up all required photos. Please post all full length photos wearing your new boots. Once again we congratulate you on reaching Expert infantry. Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted February 27, 2016 Report Share Posted February 27, 2016 Congrats Mario Quote Link to comment Share on other sites More sharing options...
SStormtrooper[TK] Posted February 27, 2016 Author Report Share Posted February 27, 2016 thank you very much Quote Link to comment Share on other sites More sharing options...
humperdingle Posted March 8, 2016 Report Share Posted March 8, 2016 Armour looks great! This thread will help me sort my own SDS approval Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.