Skypig Posted June 30, 2015 Report Posted June 30, 2015 I have access to a 3D printer. Does anyone know of an accurate .STL file for a DLT-19, or MG34? Thanks. Quote
SixCrazyPants Posted December 18, 2015 Report Posted December 18, 2015 That's what I'm looking for too. I've seen some prints on here, so I know someone has them...please share?!! Quote
gmrhodes13[Staff] Posted December 18, 2015 Report Posted December 18, 2015 One on Turbosquid but not cheap http://www.turbosquid.com/3d-models/3d-mg34-mg-34-model/550015 MG34 here http://www.cadnav.com/3d-models/model-10904.html Quote
SixCrazyPants Posted December 19, 2015 Report Posted December 19, 2015 One on Turbosquid but not cheap http://www.turbosquid.com/3d-models/3d-mg34-mg-34-model/550015MG34 here http://www.cadnav.com/3d-models/model-10904.html I found the turbo squid one earlier, but yeah, it's a pricey one. I'll have to check out the other one in the morning. Thanks! Quote
SixCrazyPants Posted December 20, 2015 Report Posted December 20, 2015 Good news! I found a guy on Sketchfab who modelled an MG 34, and he's selling it for $10. The model is really good Right now, the only difference from most of them out here, is no bipod (yet... it's in the works), and the range finder is blank, but that's easy to fix. If anyone wants the model, PM me and I'll give you his info. 1 Quote
Astyanax Posted December 20, 2015 Report Posted December 20, 2015 Just curious about how this works. You can't just feed the whole model into a 3D printer, right? You'll have to break it up into printable "chunks" and then reassemble? Quote
Locitus[Admin] Posted December 20, 2015 Report Posted December 20, 2015 Just curious about how this works. You can't just feed the whole model into a 3D printer, right? You'll have to break it up into printable "chunks" and then reassemble?Yes. Quote
SixCrazyPants Posted January 8, 2016 Report Posted January 8, 2016 Just curious about how this works. You can't just feed the whole model into a 3D printer, right? You'll have to break it up into printable "chunks" and then reassemble? I have it split into about 20 parts for easy printing, due to the size of my print bed (200x150x140). The perforated barrel can be substituted with PVC to lessen the amount of pieces printed. 1 Quote
SixCrazyPants Posted April 9, 2016 Report Posted April 9, 2016 The model I had was full of errors, as it was designed for animation. The guy who designed it is remodeling it for 3D printing. When is done, I'll give out his info for it. If you want to follow, here's the thread My DLT-19 project http://www.whitearmor.net/forum/index.php?/topic/34925-My-DLT-19-project Sent from my iPad using Tapatalk 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.