Jump to content

TK-12169 Requesting Incinerator Trooper Centurion Status [CfO][Approved 2nd]


TK-Sharp

Recommended Posts

TK-12169 requesting Centurion status for his Incinerator Trooper armor (Cast from Original - ROTJ)

  • Name: Michael Seeger
  • ID: TK-12169
  • Forum Name: Trooper Mitch
  • Garrison: German Garrison
  • Armor Maker: Cast from Original (CfO)
  • Helmet Maker: TE2
  • Blaster Type: Self made
  • Height: 170 cm
  • Weight: 72 kg
  • Boots: Busse Jodhpur (painted white / weathered)
  • Canvas Belt: Self made / weathered
  • Hand Plates: Self made (latex painted white / weathered)
  • Neck Seal: TK-2647

The following pics are "small" versions. Each section is followed by thumbnails which are links to the preceding pics in their original (higher) resolution.

You'll get to my EIB-Thread by clicking here ...



1) Full Body

tk12169_icn_01_frontavtup8.jpg

tk12169_icn_02_backari8utk.jpg

tk12169_icn_03_leftarrludk.jpg

tk12169_icn_03a_leftaamut5.jpg

tk12169_icn_04_rightay8uet.jpg

tk12169_icn_04a_right6euut.jpg

tk12169_icn_03b_leftahku1q.jpg

tk12169_icn_04b_right90u9g.jpg

tk12169_icn_01_frontaajupt.jpg tk12169_icn_02_backarsduu6.jpg tk12169_icn_03_leftarlgu39.jpg tk12169_icn_03a_leftayyub0.jpg tk12169_icn_04_rightatxulq.jpg tk12169_icn_04a_rightwxu5t.jpg tk12169_icn_03b_leftajsuyi.jpg tk12169_icn_04b_right8buob.jpg


1a) Action
tk12169_icn_99_actionvyu88.jpg

003-red-stormtrooper-7mar2.png


2) Armor Details

2.1) Ab/Kidney Attachment - Buttons and Orientation
tk12169_icn_05a_abbuti3shj.jpg

tk12169_icn_05b_ablefvxuxz.jpg

tk12169_icn_05b_abrigvmu1w.jpg

tk12169_icn_05a_abbutl3jq3.jpg tk12169_icn_05b_ablefy1j61.jpg tk12169_icn_05b_abrigfrjtu.jpg


2.2) Butt/Kidney not fixed
tk12169_icn_06_buttkis9sjb.jpg

tk12169_icn_06_buttkijekit.jpg


2.3) Hand Plate
tk12169_icn_07a_handpz1s50.jpg

tk12169_icn_07a_handpxukox.jpg


2.4) Shoulder Bridge and Connections   -   U P D A T E D   -
tk12169_icn_08_shouldjmq9m.jpg

tk12169_icn_08a_shoul4oq3x.jpg

tk12169_icn_09a_shouligqzg.jpg

tk12169_icn_09b_shoulwvras.jpg

tk12169_icn_10_backchwhozi.jpg

tk12169_icn_10a_backce3q4l.jpg

tk12169_icn_08_shouldnlftc.jpg tk12169_icn_08a_shoul2xeoe.jpg tk12169_icn_09a_shoulh1eu7.jpg tk12169_icn_09b_shoulopebz.jpg tk12169_icn_10_backchqaenc.jpg tk12169_icn_10a_backcvod6v.jpg


2.5) Thigh Pack Attachment
tk12169_icn_11a_thighbpsy6.jpg

tk12169_icn_11b_thigh11s10.jpg

tk12169_icn_11c_thighxss39.jpg

tk12169_icn_11d_thighb5s2u.jpg

tk12169_icn_11a_thighpak8g.jpg tk12169_icn_11b_thighuyj3o.jpg tk12169_icn_11c_thigh5ik66.jpg tk12169_icn_11d_thightqkn9.jpg


2.6) Knee Plate
tk12169_icn_12a_kneepftu6d.jpg

tk12169_icn_12b_kneepljuom.jpg

tk12169_icn_12a_kneept3sr1.jpg tk12169_icn_12b_kneepg5shj.jpg


2.7) Drop Box Back (and belt details)
tk12169_icn_13c_beltdr5up6.jpg

tk12169_icn_13_beltveu2e.jpg

tk12169_icn_13a_beltldtudq.jpg

tk12169_icn_13b_beltrjqu18.jpg

tk12169_icn_13c_beltddosom.jpg tk12169_icn_13_beltxrs9o.jpg tk12169_icn_13a_beltl23sus.jpg tk12169_icn_13b_beltr74suz.jpg


2.8) Cod and Butt Plate Attachment
tk12169_icn_14_codandptu0h.jpg

tk12169_icn_14a_codan6duoa.jpg

tk12169_icn_14_codandxrstx.jpg tk12169_icn_14a_codanc3sxp.jpg


2.9) Interior Strapping
tk12169_icn_15_interi1cu2b.jpg

tk12169_icn_14a_interkpugn.jpg

tk12169_icn_14b_interteuuc.jpg

tk12169_icn_15_interi1pscx.jpg tk12169_icn_14a_inters0sja.jpg tk12169_icn_14b_inter2rsn7.jpg


2.10) Kidney Plate "Notch"
tk12169_icn_16a_kidne4uufy.jpg

tk12169_icn_16b_kidnep0u5a.jpg

tk12169_icn_16a_kidnenks1j.jpg tk12169_icn_16b_kidneg4sjm.jpg


2.11) Wrist side of forearms
tk12169_icn_17_wristse3l2t.jpg

tk12169_icn_17_wrists87z2y.jpg


3) Helmet Details
tk12169_icn_18_helmetp1uc8.jpg

tk12169_icn_19a_helmemvutd.jpg

tk12169_icn_19b_helme9yu2x.jpg

tk12169_icn_20_helmetdluna.jpg

tk12169_icn_21_helmetb6u0s.jpg

tk12169_icn_22_helmets5uur.jpg

tk12169_icn_23_helmet40uwd.jpg

tk12169_icn_18_helmetwauhh.jpg tk12169_icn_19a_helmempuaw.jpg tk12169_icn_19b_helme2kuxi.jpg tk12169_icn_20_helmethwugj.jpg tk12169_icn_21_helmet64u7e.jpg tk12169_icn_22_helmet8qusf.jpg tk12169_icn_23_helmetfzerc.jpg



4) Blaster Details

tk12169_icn_50_plasma9ppc8.jpg

tk12169_icn_50_plasmardo1x.jpg

tk12169_icn_50_plasma45el4.jpg tk12169_icn_50_plasmawwesz.jpg

Here you'll find the build thread of this Plasma Rifle: [url=http://www.whitearmor.net/forum/topic/29496-plasma-rifle-flamethrower-build-for-my-icn


5) Accessory Details

tk12169_icn_26_necksep6uxb.jpg

tk12169_icn_27_thermagfugz.jpg

tk12169_icn_26_necksem0f5k.jpg tk12169_icn_27_thermaqui6x.jpg
 

 

The pictures in Section 2.4 (Shoulder Bridge and Connections) were updated because I exchanged the white straps with a black ones.

Link to comment
Share on other sites

Alright ,Michael!!! Thank you for treating us to the adventure that you have had with this armor! What an inspiration this has been! And thank you for applying to for your Centurion badge! Let's take a look!

 

CRL and Centurion Application Requirements:

All required photos have been submitted.  There is one thing that will need to be changed to before I can put Centurion for your armor through. I apologize for not mentioning this in the Centurion suggestions on your EIB application. The armor for this character essentially follows the base ROTJ armor format. One aspect of that armor are the straps that connect the chest and back over the shoulders. These should either not be present at all or be black. Because this detail is not specified as an EIB requirement, it didn't get filed in my tiny mind. tk12169_icn_15_interi1cu2b.jpg

 

Make this small change and Centurion is yours.

 

Other-Armor Fit/Assembly:

All I can say is........BAM!!!!  You nailed the total effect of this armor by weathering the red paint! I hope you agree that this really was the frosting on this cake!! I was so excited to see that you did this!  Outstanding work!!

I will go on record by saying tha tI originally believed that the weathering on this armor was a tad dark. There is supposed to be scuffing but not heavy weathering like on a TD (Sandtrooper). However in discussing this with Michael, it was determined that the weathering he applied was clear coated and any attempt to remove that would probably done more harm than benefit to the overall look of the armor. 

Thank you again for all the effort you obviously put into this armor and its details. Get those straps changed and Centurion will be added to you!!!

Link to comment
Share on other sites

Alright ,Michael!!! Thank you for treating us to the adventure that you have had with this armor! What an inspiration this has been! And thank you for applying to for your Centurion badge! Let's take a look!

 

--- snip ---

 

Thank you again for all the effort you obviously put into this armor and its details. Get those straps changed and Centurion will be added to you!!!

 

Thank you very much Steve. D'oh! I should have had this in mind ... :6: It's going to be changed as soon as I'm back home from work ;) Pics will then follow ...

Link to comment
Share on other sites

Allright, Steve.

 

The update is done - straps are changed, sir :salute:  All pictures in section 2.4 are updated.

Edited by Trooper Mitch
Link to comment
Share on other sites

So feel free to join us :smiley-sw013:

I hope to do so soon. in the Dutch Garrison that is. Yesterday I spent a great afternoon with the guys from RS Propmasters in the UK. Excellent team with great craftsmanship. They'll be working on my first full TK set in the next couple weeks. Can't wait!

Link to comment
Share on other sites

Michael:  You have indeed made the necessary changes to your chest/back connecting strap!    

Before:post-12041-0-06699100-1423074222_thumb.jpg

 

After:tk12169_icn_09b_shoulwvras.jpgtk12169_icn_10_backchwhozi.jpg

Since you have made the required changes necessary, I am pleased to say congratulations on your Centurion approved Incinerator Trooper armor!!!

  • Like 1
Link to comment
Share on other sites

YAY, Steve !!! That's all I wanted :D :D :D  Thank you very much !!! I'm so glad that I made it again ... :D :D :D

 

... and now I'm also the first German INC Centurion, right ? ;)

Edited by Trooper Mitch
Link to comment
Share on other sites

I hope to do so soon. in the Dutch Garrison that is. Yesterday I spent a great afternoon with the guys from RS Propmasters in the UK. Excellent team with great craftsmanship. They'll be working on my first full TK set in the next couple weeks. Can't wait!

 

The guys from RS Propmasters do a brilliant job! No question that you'll get 501st approved ... and then: EIB / Centurion, right ;-) ... I'm looking forward for it :duim:

Link to comment
Share on other sites

Huge congrats buddy! This is a really inspirational build!  :th_AnimatedBravoSmiley:

 

Thank you very much !!! A very, very short moment I thought about also building a Clone Commander (Deviss) ... but my next project will definitely be a TD ... ;)

Link to comment
Share on other sites

Your weathering has me drooling all over. Nice to see an INC trooper make the Centurion ranks. Congrats!

 

Thank you very much, Evan. I thought that it was about time ... ;) ... and it feels pretty awesome :D

Link to comment
Share on other sites

Todd, I know that Steve (SteveChewbacca) was the first INC Centurion and in the gallery I also found Ryan (that954trooper) so I suppose we're four INC Centurions in here ... feels quite exclusive, anyway ;)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...