TK-4510[TK] Posted January 22, 2008 Report Share Posted January 22, 2008 where do I get ROTJ mic tips???? Quote Link to comment Share on other sites More sharing options...
ManInWhite Posted January 22, 2008 Report Share Posted January 22, 2008 I believe keith makes good ones. Try contacting him or possibly Guns. Quote Link to comment Share on other sites More sharing options...
TK-4510[TK] Posted January 22, 2008 Author Report Share Posted January 22, 2008 No, those are not the same as the ROTJ ones I have seen on starwarshelmets.com The ROTJ ones appear bigger.. Quote Link to comment Share on other sites More sharing options...
ManInWhite Posted January 22, 2008 Report Share Posted January 22, 2008 Oh. Ok. I had no clue. They looked really similar to the ANH ones. The only difference I can see is the metal ring looks thicker. I wish you luck in your search. Quote Link to comment Share on other sites More sharing options...
Vaj Posted March 5, 2008 Report Share Posted March 5, 2008 Even the ANH ones are bigger as the replicas or the casts I think. Possibly the resin that was used has too much shrinkage or a bad silicon was used. If latex was used to make the cast that would be the worst becasue it has about 10 percent of shrinkage. But I agree Keith mics are the best to get. Ā The mics on the Rotj might look bigger becasue the plastic of the helmet is thicker and the shape of the rotj is different also. For me the mics look the same on anh and rotj. The casts could be smaller. Quote Link to comment Share on other sites More sharing options...
troopermaster Posted March 6, 2008 Report Share Posted March 6, 2008 There are at least two versions used in ROTJ. The studio helmets had the ANH hovi's while the location helmets were slightly different. They had foam inside the tips for some reason? Quote Link to comment Share on other sites More sharing options...
Vaj Posted April 9, 2008 Report Share Posted April 9, 2008 Paul can you put pics side by side? I did not know that. Quote Link to comment Share on other sites More sharing options...
troopermaster Posted April 9, 2008 Report Share Posted April 9, 2008 The pics I had are gone when I had my computer reformated and the site where I got them (TE's) is down for good too. I'm not sure if TE moved the pics or not, best ask him Quote Link to comment Share on other sites More sharing options...
keith Posted June 16, 2008 Report Share Posted June 16, 2008 Hovi-Mix tips are fine for all ROTJ helmet versions, but most of the "hero" ROTJ helmets (the ones with the funny ears that sort of look melted) have larger mic tips which are metal and filled with white foam shavings. Ā All background ROTJ helmets that have been found so far have Hovi-Mix tips. Ā Keith. Quote Link to comment Share on other sites More sharing options...
riveting Posted June 17, 2008 Report Share Posted June 17, 2008 keith know's his mic tip's Quote Link to comment Share on other sites More sharing options...
Vaj Posted June 19, 2008 Report Share Posted June 19, 2008 So the white foam shavings are the nipple that you have in your current mic tips? I got a pair of them a while ago and was wondering why the nipple part is extended to the back of the tip? I never found a pic on which it was visible on a real helmet. That way the tips are coming more out of the holes. Can you make this clear Keith? Ā Marcus Ā Hovi-Mix tips are fine for all ROTJ helmet versions, but most of the "hero" ROTJ helmets (the ones with the funny ears that sort of look melted) have larger mic tips which are metal and filled with white foam shavings.Ā All background ROTJ helmets that have been found so far have Hovi-Mix tips. Ā Keith. Quote Link to comment Share on other sites More sharing options...
TK-4510[TK] Posted June 19, 2008 Author Report Share Posted June 19, 2008 Scott's got the hero mic tips I think. I dont get what you mean by "foam shavings".... Ā here's the ones I have seen.. Ā Quote Link to comment Share on other sites More sharing options...
keith Posted July 19, 2008 Report Share Posted July 19, 2008 So the white foam shavings are the nipple that you have in your current mic tips? I got a pair of them a while ago and was wondering why the nipple part is extended to the back of the tip? I never found a pic on which it was visible on a real helmet. That way the tips are coming more out of the holes. Can you make this clear Keith? Ā Marcus Ā No, the nipple is not foam shavings. The nipple in the mic tips i make is the same as the nipple in the original hovi-mix tips. Its cast off an orignal nipple. I call them guts. The part sticking out of the back does not make the mic tips stick out of the helmet any further. The outher body of the actual mic tip touches the helmet before the insert does. Ā The white foam is in the larger ROTJ tips which the softer/most different from ANH, ROTJ helmets had. Ā Keith. Quote Link to comment Share on other sites More sharing options...
JoeR Posted July 19, 2008 Report Share Posted July 19, 2008 Here's a picture of my background helmet's mic tips. They have a nipple inside as you can see. Keith's would perfect for a replica of these as his would be the same generation, ie second gen. Ā Joe Ā Quote Link to comment Share on other sites More sharing options...
keith Posted July 27, 2008 Report Share Posted July 27, 2008 If anyone else here would rather not have the insert with cast off original guts sticking out the back of the mic tip, just let me know. I can cast the insert/guts without having the part sticking out of the back and just have the back of the insert flush with the bottom of the mic tip body. It will even save resin, so i have no problem in making them that way. Ā I know Vaj is not happy with them and has even asked me if he can recast my mic tips and start selling them (The answer to that was no), but if there is anyone else who is not happy with them, you can send them back for a refund, as i have told Vaj. Ā Again, if anyone else would rather NOT have the part that sticks out of the back on the mic tips, just let me know and i can make the insert flush with the base of the mic, no problem. Ā BTW Vaj, the mic tips that you say a bigger than mine in one of your threads about mic tips, look to me like they have been pulled out of the mold too soon. I have done this myself and ended up with a larger mic tip that needs a larger mesh screen. Ā Keith. Quote Link to comment Share on other sites More sharing options...
TK-4510[TK] Posted July 27, 2008 Author Report Share Posted July 27, 2008 No Keith, dont change ANYTHING. Your mic tips outshine everyone else. I like having that extra bit on the back. Leaves more room to adjust the angle of the tip if needed I think. Quote Link to comment Share on other sites More sharing options...
tk0000[501st] Posted August 7, 2008 Report Share Posted August 7, 2008 Speaking of mic tips. How can i get a few sets Keith? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.