Sonnenschein Posted May 30, 2011 Report Share Posted May 30, 2011 Does anyone know the exact diameter of the MGC sterling? not the one from the bbc templates. Thanks! Quote Link to comment Share on other sites More sharing options...
TK_LEPER Posted May 30, 2011 Report Share Posted May 30, 2011 (edited) 4130 steel 1.50 OD x 1.370 ID for correct fit. Edited May 30, 2011 by TK 4702 Quote Link to comment Share on other sites More sharing options...
Sonnenschein Posted May 30, 2011 Author Report Share Posted May 30, 2011 Thanks Jesse! That would be 38mm OD and 35 mm ID. I always thought the MGC was much smaller, like 35mm OD. Quote Link to comment Share on other sites More sharing options...
TK bondservnt[501st] Posted May 30, 2011 Report Share Posted May 30, 2011 you have the MGC jesse? Quote Link to comment Share on other sites More sharing options...
dashrazor Posted May 30, 2011 Report Share Posted May 30, 2011 i read somewhere that it is 1.25" OD but i am asking on the modelgun forums to be sure Quote Link to comment Share on other sites More sharing options...
TK_LEPER Posted May 30, 2011 Report Share Posted May 30, 2011 Oops, no... I have a Sterling SMG. Must have read the header incorrectly. Sorry guys! :B Quote Link to comment Share on other sites More sharing options...
SamJ[501st] Posted May 30, 2011 Report Share Posted May 30, 2011 OD of the MGC is 35mm. I just measured mine. Quote Link to comment Share on other sites More sharing options...
dashrazor Posted May 30, 2011 Report Share Posted May 30, 2011 this is what i got from the model gun forums: 36.5mm OD (depending on measurement location), translating to about 1.42 in. This is only 2mm difference, so if real Sterling was made of 1mm thicker steel, it would have the same OD and ID. Quote Link to comment Share on other sites More sharing options...
Lichtbringer Posted May 30, 2011 Report Share Posted May 30, 2011 They are different, so there is no "would". Quote Link to comment Share on other sites More sharing options...
Sonnenschein Posted May 31, 2011 Author Report Share Posted May 31, 2011 Thanks everybody! Now I'm off to find the correct pipe.... Quote Link to comment Share on other sites More sharing options...
dashrazor Posted May 31, 2011 Report Share Posted May 31, 2011 after looking a bit it seems 32mm waste pipe is around 36mm O.D. it should be close enough. Quote Link to comment Share on other sites More sharing options...
TANGO'D FETT Posted June 2, 2011 Report Share Posted June 2, 2011 36mm for MGC 38mm for sterlings , if you get stuck we have 36mm pvc plumbing pipe here in the UK and can send you a bit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.