mr paul

The return edge around the arms has now been reduced. The plastazote back and front has been glued into place.The back armour connects under the arm to the chest with velcro in a similar fashion to the screen used suits.The ammo pouch hangs in the correct position from the slider buckle fastened to the rear right suspender.

Got a better inner arm shape to my biceps today. The BSP was more like a crescent so its been squared off. I suspect this may give me greater articulation. Bonus.

No worries. Any questions just ask

I am still breaking down the kit. Adding and removing grime from here and there. Hopefully it is looking more convincing as it progresses. Regarding the screen used suits it is interesting how the weathering pops in some lighting and looks more washed out in other shots. I am trying to find the right balance with the dirt and marks on the armour. It is a fine balance between heavy handed and not enough however these coastal defender stormtroopers are dirty buggers.

I have been lucky enough to have met the talented Germain Graziano and together with Stoo Collins and myself we have hopefully created a very nice looking shoulder buckle for the Shoretrooper. This has been a part of the kit that has bugged me since last year and I think I am finally getting closer to seeing an accurate set being produced. Here is a teaser of what we have been working on.

Come and join ireachy and myself over on facebook. The exact same thread with all the same images and instructions are over there. Click on photos, start from the bottom and work your way up https://www.facebook.com/rogueonetkbackpack/

Thank you! Appreciate it buddy.

This is the Back Stage Props kit

Here is a paint test on my newly cast pair of medium sized belt boxes. very pleased with the results.

Nice looking kit! Did Jim re use the shoulder bells, biceps, forearms and shins from his shore trooper kit or are they all new sculpts?

I have managed to repair and restore this thread for the paint tutorial. I need an admin to help me tidy up the thread. Could someone advise me please. i need a load of old posts removing.

Here are some pictures of my Shoretrooper costume build so far. It is an ongoing project so I will not call it finished yet.

That makes no sense.

It is going to be a while before we have this build thread repaired. If you are building a pack and need information or photos we are still updating our back pack Facebook page regularly. We have just published instructions for making the longer antenna variant. There is also a half price sale on the Hook greeblie. PM me for details if you are interested.

You can find my tutorial here in my FB page. I will hopefully have this thread up and running again asap. https://www.facebook.com/pg/totalgrunt/photos/?tab=album&album_id=460012564345933

Just had a message from Photobucket telling me their terms and conditions have changed as of last week. The service I was getting free last week is now going to cost me $399.00 a year if I want to continue 3rd party sharing of my images. Every image I have ever shared on a forum has been taken down until I pay up. Sorry for the inconvenience. I have joined Imgur and hope to have all these pictures uploaded again asap.

Just had a message from Photobucket telling me their terms and conditions have changed as of last week. The service I was getting free last week is now going to cost me $399.00 a year if I want to continue 3rd party sharing of my images. Every image I have ever shared on a forum has been taken down until I pay up. Sorry for the inconvenience. I have joined Imgur and hope to have all these pictures uploaded again asap.

Looks good. I have them available for sale if you want the real original part from the 1960's Pm if you want to do a deal for you and your fellow R1 troopers in your unit.

I would hazard a guess that the orange rectangle displayed on the left shoulder straps of all the packs is there to represent the orange that is seen wherever there are Kyber crystals. In the film we see smaller orange canisters, larger orange crates and we continue to see them through to Scarif where the AC-ACT carry the large orange cargo crates.

Its difficult to tell. The Topps card image I posted does definately show a significantly shorter aerial however in the image below (although artwork, it is just photoshopped over a photograph) you can see the longer version antenna has slipped downward presenting a shorter appearance at the top of the pack. You can see the rest of the antenna protruding from the base of the pack underneath. So it would be hard to prove if the shorter antenna in the screen shot is the shorter version or a slipped longer antenna.

Here is the the card showing the longer antenna with the orange pauldron and the shorter antenna with the black pauldron.

Yes you are correct. Also the antenna should be another 10 inches or so longer using the top part of the middle section of the precision X rod to get the length (a reliable source has confirmed this for us) This thread focuses on the pack seen at CE. We speculated last year that the antenna (rod) was broken at the base and was not the intended design however I believe the shorter antenna was featured on a tops card or somewhere. Cannot recall at the moment. A while back we mentioned on the FB page about there being 2 variations to the antenna, long and short versions. There are a few things that need looking at again regarding the actual packs seen on screen however due to them being in the background for seconds at a time we are having to go elsewhere to try and find out the answers. I also suspect the liner to the ammo case should be pulled taught across the box.

Shoretrooper Helmet Paint Tutorial Here are some pictures showing the textures of the Shoretrooper helmet under different lighting and across different costume displays. Aside from a similar roughness on the hip plates this texture does not seem to occur anywhere else on the armour. It seems deliberate by the art department that painted them and I do not think it is to replicate ware and tare or corrosion. Instead I believe it is intended to give the helmet a cast metal appearance like that of cast iron or steel. A similar rough and varied pattern like that seen on a Sherman tank. This rough texture gives the Shoretrooper a very unique aesthetic one of which is not seen on any other Star Wars helmet so it should not be overlooked nor dismissed. It is important to note that while the texture covers the entire helmets surface it is not present on any of the black areas i.e. the snout, forehead brim, ovals on the ears and areas inside the ears, vertical vents along the back, the detailing under the brow above the lens, fin greeblies under the front, black rim around the neck, the 2 horizontal slots along the bottom back edge, the thick and thin black stepped bands behind the forehead at the side including the beige band in-between and the 2 short slots cut into either side cheek. The picture below shows the paint flaking off and revealing the brown material the helmet was cast in. This flaking paint can also be seen across all the costumes over all parts of the armour in various displays post filming. I do not believe this flaking effect was intentional and is a result of usage on set from filming and stunts etc. Images from the Rogue One Visual Guide and the leaked image (shown below) do not show evidence of the flaking therefore on this paint application I will not be masking areas for the paint chipping effect. Instead I will be replicating the scratching and scuffing that is seen in the image below and the visual guide. Masking With a small, old paintbrush Humbrol Maskol can be used to carefully mask all the areas mentioned above. A hairdryer will speed up the process. I apply 3-4 coats to make sure there is no paint bleed later on. Masking tape is used for the larger areas. Take time to mask the areas carefully. The lens must be masked properly. The Anovos is glued together well and has to be painted assembled. Paint bleeding onto the lens would not be clever. I have made sure the masking tape is tucked under the edges and sealed it with Maskol just to be sure. Important not to let any paint get inside the helmet onto the padding. Once all the areas are masked give the surface a very light sanding and a wipe down ready for the paint application. Adding Texture I am using these 2 texture paints to get the correct look. Rust-oleum Brown Hammered Finish and Rust-oleum Cast Iron (I also use a third texture paint, a light spray of Rust-oleum Aged Iron which helped to get a little bit of the grainy feel to some parts of the helmet) The paints were applied in the following order. Light covering of cast iron and light covering of hammered. Coat the helmet in cast iron. Coat the helmet in hammered. The result of these 2 paints being layered in such a way looks like this. The texture is not too tight and not too loose. It is at this point I gave it some light passes with the aged iron effect Rust-oleum for more grainy areas. To knock it all back and to give a little variation and irregularity in the texture across the surface of the helmet I sanded areas with a very fine sanding block. Nothing too severe. The final texture looks like this. Removing the Masks The reason I applied the Humbrol masking fluid so thick was to make it easier to peel off with the many layers of heavy duty paint on top of it. Very carefully remove the masks from the all the areas of the helmet except the front fin greeblies, the lens, the snout and the neck rim around the bottom. Once all the masking fluid has been removed give all the surfaces a gentle wipe down ready for final paint. Painting It has long been known that the armour was cast (not painted) in a dark brown almost black colour as stated by Glyn Dillon the costume designer of the Shoretrooper. I have heard the colour scheme of the Shoretrooper was influenced by German WW2 Messerschmitt fighter planes and I expect this brown chosen was intentional. I feel it is important to include it in the paint scheme. There are a few reference pictures where it has been possible to see the brown colouring of the material used for the armour. One of the more recent images is from the bonus features on the Rogue One DVD shown below. Here is another image showing the brown being revealed beneath the paint flaking off from the abdominal plate. More brown material showing through on the front of the bucket. Allthough the exact colour has not been confirmed as yet, it looks to be a dark red/brown. I have chosen Vallejo Dark Rust. Not available in a rattle can so will have to be ran through an airbrush. In order for the brown to remain dark and to avoid it "popping" and being too bright it is necessary to spray a matt black base coat first. I have used an inexpensive Halfords Matt Black however any brand will suffice. Once the black base is completely dry. Coat with the Vallejo Dark Rust 302 and cover until a flat even coat has been achieved. You can see in these pictures where the masking has done its job. When the brown is dry add 3 to 4 coats of clear lacquer. The images below show a comparison between the screen used colour and my version and some shots under different lighting conditions. Top Coat Using the Montana Gold sahara beige I apply light even coats until the helmet has an even flat coverage. For this application I am not masking off areas for the paint flaking effect. The sahara beige goes on quite thick and acts like filler when added over the textured surface which works to an advantage. Painting in the details Using a stencil the forehead emblem is added using Halfords Toyota Red 3E5 (the same red used for the Shoretrooper's right bicep) The masking from the snout and the fin greeblies can now be removed. The outline of the snout is masked off again ready to give it a matt black finish. The snout is not grey as I first thought. I run Vallejo matt black acrylic through an airbrush and apply it straight on top of the Anovos paint. I do not use any primer. When finished I give it a couple of light coats of Humbrol acrylic matt varnish. All the black details are now carefully filled in. I hand paint them with a brush using the matt black acrylic. After all the details have been painted, the helmet is given a couple of coats of Humbrol satin coat acrylic varnish. All of the masking tape can now be removed. Weathering To add the dirt and damage I am using 2 colours. Black and burnt umber acrylic. 60 grit sandpaper is used to recreate the scuffs and scratches that are seen on the screen used helmet. The paint is mixed thin and watery. I also apply it thickly. Important to note where the dirt is applied to the helmet. I am going to mimic what I have seen on displayed costumes. The weathering does not go up into the recesses around the eyes or under the forehead above the lens. This area is quite clean across most of the helmets I have seen. I am going to do the same because I like the look. Using a large brush I stuff the paint up into the corners and edges of the helmet. With an atomiser spray clean water over the wet paint and let it run down into the recesses. A hair dryer helps to speed up the process. Using a sponge I can dab off the excess paint leaving the remainder to settle where I want it to. 60 grit sandpaper is used to scuff the edges and tear away the paint. Very carefully and lightly hit the edges of the helmet and try to recreate the marks and damage seen on the screen used. Pay close attention to where the damage is occurring from reference images you are using. Try not to over do it. This is just the first pass so do not do it all in one go. After a few scratches have been added keep repeating this process of black and brown paint, atomise with water, let settle and dry. As the weathering builds up I start to use fine wire wool over the surface of the helmet to remove some of the paint but leaving it where I want it in the cracks and crevices. The fine wire wool also helps to continue smoothing out the surface created with the texture paints. Making it appear more of a loose texture than tight. This will also leave the dirt sitting in the recesses of the texture recreating the effect seen on the screen used buckets. Using a smaller brush I can build up the dirt heavier in the areas I want it. I keep at it until I am satisfied with the results. If the sandpaper has ground too deep and revealed the paint underneath it can be touched up to hide it. Using the Vallejo dark rust. When I am happy and everything is where it should be I give it a misting of Humbrol acrylic satin varnish avoiding the snout. The Finished Helmet Before and after picture. A comparison shot with the screen used helmet on the left. Displayed with the complete build.

Hi and thank you for your comments. I am about to start the re paint of the Anovos so I will go into the texture over the next 2 weeks. Thanks for following

A shot of my Crystal Patrol Pack here with the updated colour to the weather shroud. More browny green than greeny brown.