-
Posts
3,534 -
Joined
-
Last visited
-
Days Won
31
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by Harbinger
-
-
Well, it only took me two years to circle back to this build. I ordered a Hero helmet kit and grappling box kit from Troopermaster during the holidays, which will be here very soon. Until then, work resumes on the other stuff!
Got Joseph’s all-new Hero hand guards, in matte white (which is a closer match to the film ones):
I used plenty of E6000 to get them glued to rubber gloves (stunt gloves for reference):
- 2
-
14 hours ago, Sly11 said:
I have notice that it reads attachment size over limit so you just cant add anymore off staff, it doesn't seem to remove them.
Yep, mailbox is the same. Something to make note of.
- 1
-
Hello and welcome.
-
Congrats!
-
I don’t really know if we should split it into two versions per se but at a minimum call out that either color sight is acceptable.
The TLJ F-11 had some differences anyway if I recall.
-
Several of the TFA updates carry over as freebies due to the way the templates are built, more reference now so may need to make some things that are currently shared separate.
PS: Feel free to split off if needed:
One topic JAFO and I discussed after TFA updates was the F-11 picture was incorrect, should have a black rear sight for regular and white rear sight for the scaled-up version.
He sent me some photos but I need to get them off of FB and into here, will try and do so this next week.
- 1
-
Welcome!
-
Welcome!
-
They are all canon but the large majority of Legion TKs are ANH Stunt.
- 1
-
Lots of differences:
- hand painted vs decals for helmet details
- black vs. gray teeth
- different hand plate armor
- holster is on different side, loop vs. rivet attachment
- blaster differences - less greeblies
Sure I'm missing more off the top of my head. Your best bet is to read the CRLs as they will spell out exactly what you need for each version:
- 2
-
Final paintjob will thank your extra effort
- 1
-
Welcome aboard Matt.
-
24 minutes ago, fishgoh0nk said:
@kman I'm looking to ABS paste the seams in my thigh shims, but not sure if I should leave more room for the ABS paste to sit in, or less. I haven't worked with ABS paste before, and using the plastic from ANOVOS, would you say 1-2mm is too narrow? I'm just afraid of flex that would unseat the paste because there wasn't enough to either build adhesion to the crevice walls or enough paste to provide the flex.
Here's my planned material - I can trim the added material per recommendation.
The paste is cosmetic - you will need additional ABS backing behind the entire patch or it would fail spectacularly.
That said, smaller gaps will be less noticeable but in my experience anything thinner than a couple of mm makes it hard to get the paste in the gaps.
- 1
-
Hello and welcome aboard.
-
That's weird because they sent me several hundred kits. Just kidding, nothing here either.
-
Agree, it’s the one I keep in my wallet.
-
Finally found the time to get a photo taken and uploaded:
FISD stuff on top, everything else on the bottom. Over half of these were gifts... not bad for a little over two years in the Legion.
- 1
-
Fantastic job so far. I've used the low profile before (on my shin closures) but this is the first time I've seen the ultra thin, let us know how it works out.
- 1
-
Well guess that just confirms a super-mega-ultra boxed set with Rogue One, SOLO and a bunch o' deleted scenes in a couple of years then!
- 2
-
TFA was the same way, a bare-bones release followed a few months later by the 'special edition' version with the Blu-ray 3D and the special features and deleted scenes.
My guess is they are saving that content (and any potential director's cut) for this thing:
- 2
-
13 minutes ago, Ripper_L said:
"501st Legion" also vanishes if you reduce the screen even more. If it's too small, the toolbar switches to mobile version. Only way I see is to move it over to the left, maybe between "New Posts" and "Pages" (?)
This was my thought too.
- 1
-
I have nearly the same collection as you do Glen, have a few others and don't have the Riot Trooper coin though.
I have all from this past year except the gold OT EIB, my gold EIB from the last run Wyatt did with the 3D dies (so shiny)... but I don't actually do all that much collecting, most have been gifted to me or were trades with Garrison members.
- 1
-
-
All the makers I know of are UK based.
FISD Coins - How Many Do You Have?
in Off Topic
Posted
Not official ones, as far as I know.